KTM Performer 690E user manual

Summary of the content on the page No. 1

KTM 690E and 690SMC 2008-09 mounting guidelines:

1. View all the pictures first, to get an idea of the concept of what is being described. Be sure you understand that the
black plastic shrouding around the key is going to need cutting in order for this kit to be mounted, a simple operation.
2. Note: pictures show silver parts to help you define how they go. Actual production parts are black.
3. This kit will raise the bars approximately 20mm, normally an improvement to this bike,

Summary of the content on the page No. 2

Loosen the key bolts on both sides to help alignment Move the top plate around until it’s centered Install the black SUB mount first using the rear set of This is the correct tower pin height for this model. holes on the triple clamp and tighten the Allen bolts. Be sure the tower pin does not extend through the slot Then install the stock lower perches and tighten. too far as it can make contact with the damper body. Perches can be reversed for optional bar positions. Keep the tower pi