Life Fitness Adjustable Decline Bench user manual

Summary of the content on the page No. 1

Signature Adjustable Decline Bench
Owners Manual

Summary of the content on the page No. 2

Signature Adjustable Decline Bench Safety & Warranty It is the sole responsibility of the purchaser of LIFE FITNESS products to read the owner's manual, warning labels and instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of LIFE FITNESS exercise equipment be informed of the following information prior to its use. LIFE FITNESS recommends that all commercial fitness equipment be used in a supervise

Summary of the content on the page No. 3

FOUND ON THE FRAME FOUND AT MOVING PARTS

Summary of the content on the page No. 4

Signature Adjustable Decline Bench Safety & Warranty WARRANTY WHAT IS COVERED This Life Fitness commercial exercise equipment (Signature Benches and Racks) is warranted to be free of all defects in material and workmanship to the original purchaser for the specific items and duration listed: 10 years on structural frame 1 year on bearings 1 year on grips 1 year on cables and belts (if so equipped) 1 year for rust or corrosion of structural frame. Scratches or scrapes where the subsurface of the

Summary of the content on the page No. 5

HOW TO GET PARTS & SERVICE Simply call Customer Support Services at (800) 351-3737 or (847) 451-0036, Monday through Friday from 8:00 a.m. to 6:00 p.m. Central Standard Time, and tell them your name, address and the serial number of your Product. They will tell you how to get a replacement part, or, if necessary, arrange for service where your Product is located or advise you on how and where to ship the Product for service. Before shipping: 1. Obtain a Return Authorization Number (RA#) from C

Summary of the content on the page No. 6

Signature Adjustable Decline Bench Assembly Instructions Item Qty Description Part Number 1 4 Roller Pad 74247XX 2 4 Fender Washer 7322301 3 10 M10 X 25mm Bolt 3256202 4 4 Roller Pad Cap 7308701 5 1 Head Pad 78219XX 6 1 Back Pad 78218XX 7 1 Back Frame 82374XX 8 5 M10 X 35mm Bolt 3256204 9 13 3/8” SAE Washer 3102514 10 1 Base Support Frame 82390XX 11 1 Base Frame 82377XX 12 2 M10 Nylock Nut 3242002 13 1 Seat Adj. Assembly 82463XX 14 2 Pivot Shaft 8239501 15 1 Adj. Pivot Shaft 8140101 16 2 M10 X 4

Summary of the content on the page No. 7

1. Slide one ROLLER PAD (1) onto one PAD SHAFT (A) until it contacts the pre-installed SHAFT COLLAR (B). Secure the ROLLER PAD using one FENDER WASHER (2) and one M10 X 25mm BOLT (3) as shown. Tighten the BOLT securely. Insert one ROLLER PAD CAP (4) onto the ROLLER PAD as shown. Repeat this procedure to install the remaining ROLLER PADS onto the remaining PAD SHAFTS. 2. Attach the HEAD PAD (5) and BACK PAD (6) to the BACK FRAME (7) using five M10 X 35mm BOLTS (8) and five 3/8" SAE WASHERS (9).

Summary of the content on the page No. 8

Signature Adjustable Decline Bench 5. Assemble the SEAT ADJUSTMENT ASSEMBLY (13) to the BACK FRAME (7) using the ADJUSTMENT PIVOT SHAFT (15). Secure the ADJUSTMENT PIVOT SHAFT using two M10 X 40mm BOLTS (16) and two ADJUSTMENT PIVOT SPACERS (17) as shown. Tighten the BOLTS securely. 6. Attach the BACK FRAME (7) to the BASE FRAME (11) using the one PIVOT SHAFT (14). Secure the PIVOT SHAFT using two M10 X 25mm BOLTS (3) and two 3/8" SAE WASHERS (9) as shown. Tighten the BOLTS securely. 7. Install