Summary of the content on the page No. 1
Wireless Weather Station
Model : BAR608HGA
User Manual
BAR608HGA lab test cover R2 1 1/8/04, 6:38 PM
Summary of the content on the page No. 2
Silence Alarm ......................................................... 9 CONTENTS Barometer ............................................................... 10 Contents ................................................................... 1 Barometric Trend ................................................. 10 Introduction .............................................................. 2 Set Unit and Altitude ............................................ 10 About Oregon Scientific ...................
Summary of the content on the page No. 3
INTRODUCTION ABOUT OREGON SCIENTIFIC TM Thank you for selecting the Oregon Scientific Wireless Visit our website (www.oregonscientific.com) to learn Weather Station (BAR608HGA). This device bundles more about other Oregon Scientific products such as precise time keeping, weather forecast, barometric trend digital cameras, hand-held organizers, health and fitness with altitude adjustment, and indoor and outdoor gear, and projection clocks. The website also includes temperature and humidity monit
Summary of the content on the page No. 4
PRODUCT OVERVIEW FRONT VIEW 1. SNOOZE / LIGHT button 2. Weather Forecast & Barometric Trend Area 3. Outdoor Temperature & Humidity Area 4. Indoor Temperature & Humidity Area 5. Clock / Alarm Area 6 Moon Phase 7. and : increase or decrease setting / activate or deactivate Atomic Clock. 8. RESET hole 9. ((.)): view alarm status; set alarm 10. MEMORY: view current, maximum and minimum temperature / humidity readings 11. CHANNEL: switch remote sensor 12. MODE: change display / settings 13. °C
Summary of the content on the page No. 5
BACK VIEW 1. Wall mount 2. Battery compartment 3. Table stand 1 REMOTE SENSOR (THGR122N) GETTING STARTED 2 3 4 BAR608HGA lab test R2 4 1/17/04, 4:39 PM EN
Summary of the content on the page No. 6
REMOTE SENSOR (THGR122NX) 1 1 2 2 3 4 1. Wall mount hole 2. RESET 1. LCD display 3. Channel number (1 - 3) 2. LED Status indicator 4. Battery compartment (Battery compartment cover not shown) 5 BAR608HGA lab test R2 5 1/17/04, 4:39 PM EN
Summary of the content on the page No. 7
CHANGE SETTINGS GETTING STARTED 1. Press and hold MODE for 2 seconds to enter setting BATTERIES mode. Batteries are not supplied with this product. You will need 2. Press UP or DOWN to change settings. to purchase 3 x UM-3 (AA) 1.5V alkaline batteries for 3. Press MODE to confirm. the main unit, and 2 x UM-4 (AAA) 1.5V alkaline batteries for the remote sensor. TABLE STAND OR WALL MOUNT Use the stand on the back of the product, or mount it on Insert batteries before first use, matching the polari
Summary of the content on the page No. 8
For best results: SETUP SENSOR • Insert the batteries and select the channel before 1. Open the remote sensor battery compartment with you mount the sensor. a small Phillips screwdriver. • Place the sensor out of direct sunlight and 2. Insert the batteries, matching the polarity as shown moisture. in the battery compartment. • Do not place the sensor more than 30 meters (98 feet) from the main (indoor) unit. SWITCH OPTION • Position the sensor so that it faces the main Channel Channel 1 - 3. If
Summary of the content on the page No. 9
DATA TRANSMISSION CLOCK Data is sent from the sensor(s) every 40 seconds. This product shows the current time, and day of week in The reception icon shown in the Temperature and English, French, German, Italian, or Spanish. The US Humidity Areas show the status. Atomic Clock in Boulder, Colorado automatically updates this information unless you disable the feature. The ICON DESCRIPTION signals are collected by the main unit when it is within Main unit is searching for 1500 km (932 miles) of a
Summary of the content on the page No. 10
TURN ATOMIC CLOCK ON/OFF ALARMS Perform this step if you cannot receive Atomic Clock This product is equipped with a 2-minute crescendo signals. Press and hold DOWN for 2 seconds. Then, alarm. manually set the clock following the "Set Clock" instructions (below). VIEW ALARM SETTINGS The signal icon indicates that the Atomic Clock Press ((.)). The Alarm Time and ((.)) status will show in feature is ON. No icon means that it is OFF the Clock Area. SET CLOCK SET ALARM You only need to do this if yo
Summary of the content on the page No. 11
SET UNIT AND ALTITUDE If no button is pressed, the Alarm will automatically silence after 2 minutes. It will then sound again after You can set the unit of measurement (mb/hPa or inHg) 8 minutes. and altitude. Doing this allows the product to take more accurate barometric measurements. 1. Press PRESSURE to select the unit of BAROMETER measurement: mb / hPa or inHg. This product tracks barometric pressure changes over 2. Press and hold PRESSURE for 2 seconds. the past 24 hours to provide the weat
Summary of the content on the page No. 12
NOTE If you use a sensor that collects only TEMPERATURE AND HUMIDITY temperature data, humidity will not be shown. This product can display current, minimum, and maximum temperatures and humidity percentage information collected by the remote sensors and main MINIMUM / MAXIMUM RECORDS (indoor) unit. Press MEM to toggle between current, maximum (MAX) and minimum (MIN) records. To clear the records, press Outdoor data is collected and displayed every 40 and hold MEM for 2 seconds. A beep will soun
Summary of the content on the page No. 13
Do not make any changes or modifications to this NOTE When you press RESET, all settings will return product. Unauthorized changes may void your right to to default value, and you will lose all stored information. use the product. The technical specification of this product and contents of this user guide are subject to SAFETY AND CARE change without notice. Images not drawn to scale. Clean the product with a slightly damp cloth and alcohol- free, mild detergent. Avoid dropping the product or TR
Summary of the content on the page No. 14
Problem Symptom Remedy SPECIFICATIONS Cannot Check sensors. Only Remote MAIN UNIT DIMENSIONS change one sensor is working sensor L x W x H 142 x 63 x 158 mm channel ( 7) (5.5 x 2.5 x 6.2 inches) Data does Initiate a manual sensor Weight 366 g (12.96 ounces) not match search ( 8) with battery main unit REMOTE SENSOR DIMENSIONS L x W x H 92 x 60 x 20 mm (3.6 x 2.4 x .79 inches) Weight 63 grams (2.22 ounces) without battery TEMPERATURE Unit °C or °F Indoor Range -5 °C to 50 °C (23 °F to 122 °F
Summary of the content on the page No. 15
RELATIVE HUMIDITY CLOCK Range 25% to 95% Atomic Clock Auto or manual (disabled) Resolution 1% Clock display HH:MM:SS Memory Minimum / maximum Hour format 12hr AM/PM Time zone PA (Pacific), MO (Mountain), CE (Central) BAROMETER or EA (Eastern) Unit mb/hPa or inHg Calendar MM/DD; weekday in Range 700 to 1050 mb 5 languages (E, D, F, I, S) (20.67 to 30.01 inHg) Alarm Single alarm with Resolution 1 mb (0.03 inHg) 2- minute crescendo and 8-minute Snooze Altitude -328 to 8203 feet Display Rainy, cloud
Summary of the content on the page No. 16
• Reorient or relocate the receiving antenna. FCC STATEMENT • Increase the separation between the equipment This device complies with Part 15 of the FCC Rules. and receiver. Operation is subject to the following two conditions: • Connect the equipment into an outlet on a circuit (1) This device may not cause harmful interference, and different from that to which the receiver is (2) This device must accept any interference received, connected. including interference that may cause undesired opera
Summary of the content on the page No. 17
DECLARATION OF CONFORMITY is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: The information below is not to be used as contact for support or sales. Please call our customer service number 1) This device may not cause harmful (listed on our website at www.oregonscientific.com, or interference. on the warranty card for this product) for all inquiries 2) This device must accept any instead. interference received, including interference that may c
Summary of the content on the page No. 18
© 2004 Oregon Scientific. All rights reserved. P/N.: 086-003312-012 BAR608HGA lab test back cover 1 12/29/03, 10:40 PM
