Garland E22-36 user manual

Summary of the content on the page No. 1

INSTALLATION AND
OPERATING INSTRUCTIONS
FOR THE
GARLAND ELECTRIC TEPPENYAKI GRIDDLE
MODEL E22-36
WARNING:
IMPROPER INSTALLATION, ADJUSTMENT,
FOR YOUR SAFETY
ALTERATION, SERVICE OR MAINTENANCE CAN
CAUSE PROPERTY DAMAGE, INJURY OR DEATH.
DO NOT STORE OR USE GASOLINE OR OTHER
READ THE INSTALLATION, OPERATION AND
FLAMMABLE VAPORS OR LIQUIDS IN THE
MAINTENANCE INSTRUCTIONS THOROUGHLY
VICINITY OF THIS OR ANY OTHER APPLIANCE.
BEFORE INSTALLING OR SERVICING THIS
EQUIPMENT.
PLEASE READ ALL SECTIONS

Summary of the content on the page No. 2

GENERAL INFORMATION 1. Check the crate for possible damage sustained during 3. Do not remove permanently affixed labels, warning or transit. Carefully remove the unit from the crate and data plates form the appliance, this may void approvals again check for damage. Any damage to the appliance and create a safety hazard. must be reported to the carrier immediately. The Garland E22 series complies with the standards CSA 2. The type of voltage supply that the equipment was C22.2 no. 109 – latest e

Summary of the content on the page No. 3

INSTALLATION Electrical Supply: Ventilation: Before attempting the electrical connection, the rating This product is to be installed under a ventilation hood. plate should be checked to ensure the equipment’s electrical Proper operation of exhaust fans (proper speed, rotation and characteristics and the supply electrical characteristics agree. adjustment) is essential. In addition a make-up air system for On griddles the supply entrance is located at the rear or the kitchen to supply fresh

Summary of the content on the page No. 4

MAINTENANCE & CLEANING Regular servicing by a competent person is recommended to Miscellaneous: ensure the continued safe and efficient performance of the 1. Wire brush the surface of the griddle to removed baked appliance. on material, wash with hot water, dry thoroughly. Lightly WARNING: Turn off the electrical mains before commencing coat the surface with vegetable oil to prevent rusting. any servicing work. 2. Wipe exposed surfaces with a mild detergent and 1. Use a test instrument with a

Summary of the content on the page No. 5

Part # 4517056 (10/04) Page 5

Summary of the content on the page No. 6

Page 6 Part # 4517056 (10/04)

Summary of the content on the page No. 7

N O T E S Part # 4517056 (10/04) Page 7

Summary of the content on the page No. 8