Summary of the content on the page No. 1
NOTE:
Please read all instructions
carefully before using this
product
MARCY
Table of Contents
Safety Notice
Magnetic Upright Bike
Hardware Pack
PL-200
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
PL 200
Retain This
Manual for
Reference
04-14-03
OWNER'S
IMPEX FITNESS PRODUCTS
MANUAL
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
www.impex-fitness.com
info@impex-
Summary of the content on the page No. 2
TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................…. 1 IMPORTANT SAFETY NOTICES..................................................................…. 2 HARDWARE PACK……….....…....................................................................…. 3 ASSEMBLY INSTRUCTIONS........................................................................…. 4 EXPLODED DIAGRAM………………………………………………………………. 10 PARTS LIST...................
Summary of the content on the page No. 3
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. Keep children and pets away from the machine at all times. DO NOT leave children unattended in the same room with the machine. 2. Only one person at a time should
Summary of the content on the page No. 4
HARDWARE PACK Part# Description Identifier #5 L-shape Handlebar Adjustment Knob (1) #6 Ø 5/8” Washer (1) #16 Seat Post Lock Knob (1) #17 M8 x 5/8” Allen Bolt (3) #18 Ø 5/8” Bent Washer (3) #23 M10 x 2 3/8” Carriage Bolt (4) #24 M10 Acorn Nut (4) #25 ∅
Summary of the content on the page No. 5
ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Adjustable Wrench and Allen Wrench NOTE: It is strongly recommended this machine be assembled by two or more people to avoid possible injury. STEP 1 (See Diagram1) A.) Attach the Rear Stabilizer (#26) to the Main Frame (#15). Secure it with two M10 x 2 3/8” Carriage Bolts (#23), ∅1” Bent Washers (#25), and M10 Acorn Nuts (#24). B.) Attach the Front Stabilizer (#22) to the Main Frame (#15). Secure it with two M10 x 2 3/
Summary of the content on the page No. 6
STEP 2 (See Diagram 2) A.) Attach the Handlebar Post (#4) to the Main Frame (#15). Connect the Middle Computer Sensor Wire (#3) from the bottom of Handlebar Post to the Lower Computer Sensor Wire (#19) from the main body of the bike. Connect the Upper Tension Connector (#20) to the Bracket on the Lower Tension Connector (#21). See HOW TO CONNECT TENSION CONNECTOR on next page. Adjust exercise tension by using the Tension Adjustment Knob (#9) on the Handlebar Post (#4). B.) Secure the H
Summary of the content on the page No. 7
HOW TO CONNECT TENSION CONNECTOR Slide the Cable wire from the Upper Tension Connector in between the opening on the wire holder on the Lower Tension Connector. Pull the Upper Tension Connector backward and slide the wire through the slot on the bracket. Drop down the Connector so the fitting sits firmly on top of the bracket. NOTE: In able to hold the Computer Post while connecting the cables and wires,
Summary of the content on the page No. 8
STEP 3 (See Diagram 3) A.) Insert the Handlebar (#7) halfway through the opening on the back of the Handlebar Post (#4). Adjust the position of the handlebar. Secure it with a L-shape Handlebar Adjustment Knob (#5) and Ø 5/8” Washer (#6). B.) Lubricate the inside of the Handlebar Grips (#31) with water. Slide the Grips onto the Handlebar. DIAGRAM 3 7
Summary of the content on the page No. 9
STEP 4 (See Diagram 4) A.) Attach the Seat (#8) to the top of the Seat Post (#10). Secure it with three Ø 5/16” Washers (#11), Ø 5/16” Spring Washers (#12), and M8 Nylon Nuts (#13). B.) Insert the Seat Post into the top opening on Main Frame (#15). Adjust the height of the Seat. Lock the Seat Post with a Seat Post Lock Knob (#16). DIAGRAM 4 8
Summary of the content on the page No. 10
STEP 5 (See Diagram 5) A.) Thread the Left Pedal (#27) counterclockwise onto the left Crank (#14). Thread the Right Pedal (#28) Clockwise onto the Crank on the other side. DIAGRAM 5 9
Summary of the content on the page No. 11
EXPLODED DIAGRAM 10
Summary of the content on the page No. 12
PARTS LIST KEY NO. DESCRIPTION QUANTITY 1 Computer 1 2 Upper Computer Sensor Wire 1 3 Middle Computer Sensor Wire 1 4 Handlebar Post 1 5 L-shape Handlebar Adjustment Knob 1 6 Ø5/8” Washer 1 7 Handlebar 1 8 Seat 1 9 Tension Adjustment Knob 1 10 Seat Post 1 11 Ø 5/16” Washer 3 12 Ø 5/16” Spring Washer 3 13 M8 Nylon Nut 3 14 Crank 1 15 Main Frame 1 16 Seat Post Lock Knob 1 17 M8 x 5/8” Allen Bolt 3 18 Ø 5/8” Bent Washer 3 19 Lower Computer Sensor W
Summary of the content on the page No. 13
COMPUTER DETAIL OF OPERATION: SET CLOCK: Once the batteries are installed, the Hour digit starts flashing. Press UP or DOWN button to set the hour and then press ENTER. After the Hour is set, the Minute digit starts flashing. Press UP or DOWN button to set the minute then press ENTER. Note: If you made a mistake or would like to re-set the clock, remove the batteries then start over. AUTO START / STOP When exercise starts, the monitor will automatically turn on and display the
Summary of the content on the page No. 14
Operating the Computer Count Up The computer can be turned on by pressing any of the three keys or by simply pedaling the bike. The values for Time, Dist, and Cal will start from Zero and accumulates upward. To reset all values back to Zero, Press and Hold Down the Enter key for two seconds. Count Down By pre-setting a value in the computer, the function will count down from the preset value back to Zero. When the value reaches Zero, the alarm will go off. For example, you wa
Summary of the content on the page No. 15
IMPEX INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option. All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Cus
