Black Box LPJ016A-TM user manual

User manual for the device Black Box LPJ016A-TM

Device: Black Box LPJ016A-TM
Category: Computer Accessories
Manufacturer: Black Box
Size: 8.22 MB
Added : 12/16/2013
Number of pages: 43
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Black Box LPJ016A-TM. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Black Box LPJ016A-TM.

For your convenience

If looking through the Black Box LPJ016A-TM user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Black Box LPJ016A-TM on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Black Box LPJ016A-TM to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Black Box LPJ016A-TM User manual - Online PDF
Advertisement
« Page 1 of 43 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Black Box LPJ016A-TM but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Black Box LPJ016A-TM. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

LPJ008A-F LPJ016A-F LPJ024A-F
LPJ008A-FM LPJ016A-FM LPJ024A-FM
LPJ008A-T LPJ016A-T
LPJ008A-TM LPJ016A-TM
802.3af and 802.3at PoE Gigabit Injectors
Gigabit speed plus extra power for high-wattage
®
BL A CK BOX
devices.
Managed and unmanaged versions available.
Conform to IEEE 802.af or 802.at specifications.
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Customer
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Sup

Summary of the content on the page No. 2

802.3af and 802.3at PoE Gigabit Injectors Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Windows is a registered trademark of Microsoft Corporation. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. We‘re here to help! If you have any questions about your application or our products, contact Black Box Tech Support at 724-746-5500 or go to blackbox.com and click on

Summary of the content on the page No. 3

FCC and IC RFI Statements Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15

Summary of the content on the page No. 4

802.3af and 802.3at PoE Gigabit Injectors Instrucciones de Seguridad (Normas Oficiales Mexicanas Electrical Safety Statement) 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4. Todas las instrucciones de operación y uso deben s

Summary of the content on the page No. 5

Table of Contents Table of Contents 1. Specifications ......................................................................................................................................................................................... 6 2. Overview ......................................................................................................................................................................................... 7 2.1 Introduction .....................................

Summary of the content on the page No. 6

802.3af and 802.3at PoE Gigabit Injectors 1. Specifications ® Compliance: All models: cUL/UL ; RoHS Connectors: Data in: LPJ008A-F, LPJ008A-FM, LPJ008A-T, LPJ008A-TM: (8) RJ-45 (10/100/1000); LPJ016A-F, LPJ016A-FM, LPJ016A-T, LPJ016A-TM: (16) RJ-45 (10/100/1000); LPJ024A-F, LPJ024A-FM: (24) RJ-45 (10/100/1000); Data/PoE out: LPJ008A-F, LPJ008A-FM, LPJ008A-T, LPJ008A-TM: (8) RJ-45 (10/100/1000); LPJ016A-F, LPJ016A-FM, LPJ016A-T, LPJ016A-TM: (16) RJ-45 (10/100/1000); LPJ024A-F, LPJ02

Summary of the content on the page No. 7

Chapter 2: Overview 2. Overview 2.1 Introduction Use the Power over Ethernet (PoE) Injectors to reliably power multiple PoE devices. Ten models are available: • 802.3af PoE Gigabit Injector, 8-Port (LPJ008A-F) • 802.3af PoE Gigabit Injector, 16-Port (LPJ016A-F) • 802.3af PoE Gigabit Injector, 24-Port (LPJ024A-F) • 802.3af PoE Gigabit Managed Injector, 8-Port (LPJ008A-FM) • 802.3af PoE Gigabit Managed Injector, 16-Port (LPJ016A-FM) • 802.3af PoE Gigabit Managed Injector, 24-Port (LPJ024A-FM) • 80

Summary of the content on the page No. 8

802.3af and 802.3at PoE Gigabit Injectors 2.4 Hardware Description 2.4.1 Front Panel Figure 2-1 shows the front panel of the 24-port PoE Gigabit Injector. Figures 2-2 and 2-3 show close-up views of front-panel components. Table 2-1 describes the front-panel components. 1 3 4 5 2 Figure 2-1. Front panel, 24-port units. 1 2 Figure 2-2. Close-up of front-panel data/power and data ports. 3 5 4 Figure 2-3. Close-up of front-panel Ethernet and USB Type B connectors. Page 8 724-746-5500 | blackbo

Summary of the content on the page No. 9

Chapter 2: Overview Table 2-1. Front panel components. Number Component Description 1 (24) RJ-45 ports, top row Data and power ports 2 (24) RJ-45 ports, bottom row Data ports 3 (1) RJ-45 Ethernet connector Links to network interface card (only LPJ008A-FM, LPJ016A-FM, LPJ024A-FM, LPJ008A-TM, LPJ016A-TM models have this connector) 4 USB Type B connector Links to USB 5 AC LED Lights when AC power is connected 2.4.2 Back Panel Figure 2-4 shows the back panel of the 24-port PoE Gigabit Inject

Summary of the content on the page No. 10

802.3af and 802.3at PoE Gigabit Injectors 2.5 Safety Procedures: General Precautions Please read the following precautions carefully before installing and connecting the system to a power source: NOTE: Only qualified and trained service personnel (in accordance with IEC 60950 and AS/NZS 3260) should install, replace, or service the equipment. Install the system in accordance with country or national codes, or to the U.S. National Electric Code if you are in the United States. 1. T he building

Summary of the content on the page No. 11

Chapter 3: Hardware Installation 3. Hardware Installation 3.1 Power Cord Requirements Power cords must meet the requirements for the country where you will use the PoE Injector. U.S. and Canada • The cord must have a minimum of 10-A rated current competence. ® • The cord must be UL or CSA approved. • The minimum requirement for the flexible cord is: - 18 AWG (10-A) - Three-conductor (line, neutral, ground) - T ype SV (stranded vacuum rubber jacketed) or SJ (stranded junior rubber jacketed) o

Summary of the content on the page No. 12

802.3af and 802.3at PoE Gigabit Injectors 3.2 Connecting Ethernet Cables Connect the Ethernet cables (not included) to the PoE Gigabit Injector’s data/power and Ethernet ports. See Figures 3-1 and 3-2. Ethernet port Ethernet cables connected to data and power ports Figure 3-1. PoE Gigabit Injector with Ethernet cables connected to data and power ports. Figure 3-2. Close-up view of PoE GIgabit Injector with cable connected to Ethernet port. 3.3 Connecting USB and Power Cables USB cable Connect a

Summary of the content on the page No. 13

Chapter 3: Hardware Installation Figure 3-4. USB cable connected to PoE Gigabit Injector. AC power cord Connect the AC power cable to the AC power connector on the rear of the PoE Gigabit Injector and the power outlet. See Figure 3-5. IEC-320 power AC power connnector plug Figure 3-5. AC power cord. 3.4 Powering On the Unit The PoE Gigabit Injector receives power via the power cord. To apply or remove power to/from the PoE Gigabit Injector, connect or disconnect the AC power cable to/from t

Summary of the content on the page No. 14

802.3af and 802.3at PoE Gigabit Injectors 3.5.2 Click System Reset on the Graphical User Interface (GUI) 1. AC LED remains green 2. Ethernet LED remains off until the unit is connected 3. 24 ports (with ports connected): same sequence as Cold Start 4. 24 ports (without ports connected): same sequence as Cold Start Table 3-1 LED Indicators. Indicator Conditions LED Off Green Orange Blinking Orange Port LED Indicates port is Indicates port is Indicates port has Indicates po

Summary of the content on the page No. 15

Chapter 4: Black Box GUI and USB Driver Installation 4. Black Box GUI and USB Driver Installation Locate and download the GUI Installation file from the included CD-ROM. 4.1 PC-to-PoE Gigabit Injector GUI Follow the Installation Wizard to install the Black Box GUI for your model, and the USB-to-Serial COM Port driver. You will need the USB-to-Serial Com Port driver to communicate with the PoE Gigabit Injector via a Communication Port on the PC. See Figures 4-1 and 4-2. Figure 4-1. Example of t

Summary of the content on the page No. 16

802.3af and 802.3at PoE Gigabit Injectors 4.3 Device Manager: to View Port Properties When you are ready to begin, connect the proper end of the USB-to-Serial cable to your PoE Gigabit Injector and the other to an available USB port on your PC. If you installed the USB driver described above, your PC will locate the new hardware. To view which Serial COM Port your PoE Gigabit Injector is installed on, follow these instructions: 1. Click Start—>Control Panel—>System—>System Properties. See Figur

Summary of the content on the page No. 17

Chapter 4: Black Box GUI and USB Driver Installation Figure 4-5. Prolific USB-to-Serial Comm Port screen. Click . Make sure the Port Setting is as shown. Click . Click on the pull-down menu and select the Com Port Number or stay with the default. Figure 4-6. Prolific USB-to Serial Comm Port Properties/Advanced Settings screen. Click to save all changes. NOTE: Write down the COM Port number because the GUI will need to know the exact port on which to search for devices. 724-746-5500 | bl

Summary of the content on the page No. 18

802.3af and 802.3at PoE Gigabit Injectors 4.4 USB Block Diagram USB device (PoE) USB port (PC) internal function Connects USB port (PC) to PoE The PC automatically detects the device via USB cable newly installed hardware. This function is called plug-and-play and is available with a USB connection. Internal USB device sends a signal to your PC, creating a “virtual COM port” The PC quickly identifies the connection (serial communications port). ® as serial COM. Windows will autom

Summary of the content on the page No. 19

Chapter 5: GUI Operation 5. GUI Operation The firmware is supplied with a Graphical User Interface (GUI), which is used to configure and manage the PoE Gigabit Injector system. If you have successfully installed the Black Box GUI and USB driver as described in Chapter 4, go to the GUI on your desk- top or from your Start Menu. 5.1 GUI Main Window Step 1: Choose the connection type. See FIgure 5-1. Figure 5-1. GUI main window. Step 2: Select the COM port number, click “Search PoE” and highlig

Summary of the content on the page No. 20

802.3af and 802.3at PoE Gigabit Injectors 5.2 GUI System Information/Operation The System Information/Operation panel on the GUI supports the main system level parameters for the unit. It also displays information about the PoE ID, firmware revision, and system status. Figure 5-3. System setup, control, information, and port commands. The system level parameters that can be configured are: • S ystem Reset: This is a function that allows the GUI to reset the software on the unit. (If System Res


Alternative user manuals
# User manual Category Download
1 Black Box ACU5052A User manual Computer Accessories 10
2 Black Box Gigabit speed plus extra power for high-wattage devices User manual Computer Accessories 0
3 Black Box ACU3001A User manual Computer Accessories 2
4 Black Box KVT4IP16CATUV User manual Computer Accessories 0
5 Black Box ACU5051A User manual Computer Accessories 2
6 Black Box ACL0404A User manual Computer Accessories 1
7 Black Box IC64OA User manual Computer Accessories 0
8 Black Box KV1405A User manual Computer Accessories 0
9 Black Box 26681 User manual Computer Accessories 0
10 Black Box JPM614A-R7 User manual Computer Accessories 0
11 Black Box KV0004A-LED User manual Computer Accessories 4
12 Black Box gigatrue cat6 component level patch panels User manual Computer Accessories 0
13 Black Box ACU5250A-R2 User manual Computer Accessories 16
14 Black Box KV0004A-XTRA-LED User manual Computer Accessories 1
15 Black Box KV1406A User manual Computer Accessories 0
16 Sony VGC-RB50(G) User manual Computer Accessories 1
17 Sony Movie Studio HD Platinum Suite 11 MSPSMS11000 User manual Computer Accessories 177
18 Sony Hi-MD Walkman MCMD-R1 User manual Computer Accessories 7
19 Sony Sound Forge V.10.0 Pro SF-10000 User manual Computer Accessories 435
20 Sony Rechargable Battery Pack VGP-BPSC31 User manual Computer Accessories 23