Black Box ACU505A-R2 user manual

User manual for the device Black Box ACU505A-R2

Device: Black Box ACU505A-R2
Category: Computer Accessories
Manufacturer: Black Box
Size: 1.45 MB
Added : 11/11/2013
Number of pages: 32
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Black Box ACU505A-R2. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Black Box ACU505A-R2.

For your convenience

If looking through the Black Box ACU505A-R2 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Black Box ACU505A-R2 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Black Box ACU505A-R2 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Black Box ACU505A-R2 User manual - Online PDF
Advertisement
« Page 1 of 32 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Black Box ACU505A-R2 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Black Box ACU505A-R2. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

® ®
ACU5050A-R2 ACU5250A-R2
NETWORKSERVICES

ServSwitch Wizard VGA/USB
Extend one or two* VGA video links plus four USB
devices and speakers up to nearly 1000 feet from
your computer.
Uses one or two* length of Category 5, 5e, 6, 7 or 7a twisted-pair cable.
* Dual-variant models
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Customer
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Support
Mailing addr

Summary of the content on the page No. 2

ServSwitch Wizard VGA/USB Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks, and ServSwitch is a trademark, of BB Technologies, Inc. Mac is a registered trademark of Apple Computer, Inc. Linux is registered trademark of Linus Torvalds. Windows is a registered trademark of Microsoft Corporation. NetWare is a registered trademark of Novell, Inc. Sun is a trademark of Sun Microsystems, Inc. Unix is a registered trademark of UNIX System Laboratories, Inc.

Summary of the content on the page No. 3

FCC and IC RFI Statements Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15

Summary of the content on the page No. 4

ServSwitch Wizard VGA/USB Instrucciones de Seguridad (Normas Oficiales Mexicanas Electrical Safety Statement) 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. L as instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4. T odas las instrucciones de operación y uso deben ser seguidas. 5.

Summary of the content on the page No. 5

Table of Contents Contents 1. Specifications ............................................................................................................................... ............................................... 6 2. Overview .................................................................................................................................................................................... 7 3. Installation ..................................................................

Summary of the content on the page No. 6

ServSwitch Wizard VGA/USB 1. Specifications ServSwitch Wizard VGA/USB single-variant Casings (w x h x d): 118.4mm (4.66”) x 26mm (1.02”) x 74.8mm (2.94”) Construction: 1U compact case, robust metal design Weight: 0.33kg (0.72lbs) Mount kits: Rack mount Power to adapter: 100-240VAC 50/60Hz, 0.5A, Power to remote unit: 5VDC 12.5W Operating temp: 32 to 104°F (0 to 40°C) Approvals: CE, FCC ServSwitch Wizard VGA/USB dual-variant Casings (w x h x d): Local module: 122mm (4.7’’) x 48mm (2’’)

Summary of the content on the page No. 7

Chapter 2: Overview 2. Overview Thank you for choosing the ServSwitch Wizard VGA-USB extenders which provide a very effective way to put distance between your computer and its peripherals. The compact casings and ease of use of the modules belie the ingenuity of their operation. Using our proprietary transmission techniques we are able to reliably transfer more signals than ever before along a single length of Category 5, 5e, 6, 7 or 7a twist- ed pair cabling. What this means for you is that

Summary of the content on the page No. 8

ServSwitch Wizard VGA/USB 3. Installation 3.1 Mounting the modules – desk or rack The modules can be situated on a desk or alternatively, for larger installations, mounted within an optional rack mount chassis. 3.1.1 Desk mount Apply the supplied self-adhesive rubber feet to the underside of the module as shown in Figure 3-1: Figure 3-1. Applying the supplied self-adhesive rubber feet to the underside of the module Page 8 724-746-5500 | blackbox.com

Summary of the content on the page No. 9

4 1 2 3 I I POWER N LOCAL OUT LNK IN TOREMOTE ON ™ ServSwitch Wizard VGA/USB B L A C K B O X K V M E X T E N D E R ON Chapter 3: Installation 3.1.2 Rack mount Note: The module switches are not accessible once it is inserted into the rack, therefore, check all settings before insertion. 1 Place the rack securing plate (available as a separate kit) onto the front of the module and secure it with the two countersunk screws. 2 Orient the module on its side so that its labeled face is the correct w

Summary of the content on the page No. 10

B A ServSwitch Wizard VGA/USB 3.2 Connections Installation of the modules is straightforward and requires minimal configuration in most cases. • C on nec t ion s a t t he loca l mod u le • C on nec t ion s a t t he r e mo t e mod u le IMPORTANT: The ServSwitch Wizard VGA-USB can be used with other hubs in the system, but please note that the local unit should not be connected to the downstream port of a bus-powered hub due to power constraints. Additionally, dual-variant local units

Summary of the content on the page No. 11

POWER OUT OUT LINK TOREMOTE ON ™ ServSwitch Wizard VGA/USB B L A C K B O X K V M E X T E N D E R POWER OUT LINK TOREMOTE ON ™ h Wizard VGA/USB K V M E X T E N D E R B A Chapter 3: Installation 3 Optionally connect a local video display to the video out feed-through connector on the local module as shown in Figure 3-5: Figure 3-5. Optionally attaching a video display to the local module [Dual-variant only] Optionally connect a second local video display to the upper socket on the local module.

Summary of the content on the page No. 12

B A ServSwitch Wizard VGA/USB 3.2.1.2 USB connections IMPORTANT: The Wizard VGA/USB can be used with other USB hubs in the system, but please note that due to power con- straints, the local unit should not be connected to the downstream port of a bus-powered USB hub. Additionally, Wizard VGA/ USB dual-variant local units must always be powered using their supplied power adapter. Please see section 3.2.1.5 Local module power for details. 1 Use the supplied USB cable to link the USB socket of t

Summary of the content on the page No. 13

B A B A Chapter 3: Installation 3.2.1.3 Audio connections 1 Optionally connect an audio link from the computer’s speaker port to the audio input port on the local module as shown in Figure 3-8. Figure 3-8. Attaching an audio input to the single- and dual-variant local modules 2 Optionally connect local speakers to the audio output port on the local module as shown in Figure 3-9. Figure 3-9. Attaching speakers to the single- and dual-variant local modules 724-746-5500 | blackbox.com Page 13

Summary of the content on the page No. 14

POWER OUT OUT LINK TOREMOTE ON ™ ServSwitch Wizard VGA/USB B L A C K B O X K V M E X T E N D E R POWER OUT LINK TOREMOTE ON ™ h Wizard VGA/USB K V M E X T E N D E R B A ServSwitch Wizard VGA/USB 3.2.1.4 Link connections 1 Connect the link cable (up to 984 feet/300 meters in length) to the local module socket labeled TO REMOTE as shown in Figure 3-10: Figure 3-10. Attaching the CATx link cable [Dual-variant only] Attach a second category 5e, 6 or 7a link cable (up to 984 feet/300 meters in len

Summary of the content on the page No. 15

POWER OUT OUT LINK TOREMOTE ON ™ ServSwitch Wizard VGA/USB B L A C K B O X K V M E X T E N D E R POWER OUT LINK TOREMOTE ON ™ h Wizard VGA/USB K V M E X T E N D E R B A Chapter 3: Installation 3.2.1.5 Local module power The single- and dual-variant local modules differ in the way that they are powered: • The s i n g le -v a r i a n t loca l mod u le i s des i g ned t o de r iv e i ts po w e r f r om t he host c om p u t e r vi a t he U S B c on nec t ion . If t h i s i s

Summary of the content on the page No. 16

B A ServSwitch Wizard VGA/USB 3.2.2 Connections at the remote module 3.2.2.1 Video connections 1 Where possible ensure that power is disconnected from the computer system to be connected. 2 Attach the lead from the video display to the video out socket on the remote module as shown in Figure 3-14: Figure 3-14. Attaching the VGA video display cable [Dual-variant only] Optionally attach the lead from a second video display to the upper video out socket on the dual-vari- ant remote module. To s

Summary of the content on the page No. 17

POWER OUT LINK TOLOCAL ON ™ ServSwitch Wizard VGA/USB B L A C K B O X K V M E X T E N D E R POWER OUT LINK TOLOCAL ON Wizard VGA/USB V M E X T E N D E R B A Chapter 3: Installation 3.2.2.2 USB connections 1 Attach the leads of up to four USB devices (two of which are usually a keyboard and mouse) to the sockets located adjacent to the video output connector as shown in Figure 3-16: Figure 3-16. Attaching the keyboard, mouse and other USB cables [Dual-variant only] IMPORTANT: When connecting fou

Summary of the content on the page No. 18

POWER OUT LINK TOLOCAL ON ™ ServSwitch Wizard VGA/USB B L A C K B O X K V M E X T E N D E R POWER OUT LINK TOLOCAL ON Wizard VGA/USB V M E X T E N D E R ServSwitch Wizard VGA/USB 3.2.2.4 Link connections 1 Attach the connector of the category 5, 5e, 6, 7 or 7a link cable (up to 984 feet/300 meters in length) to the ‘TO LOCAL’ socket on the remote module as shown in Figure 3-18: Figure 3-18. Attaching the CATx link cable [Dual-variant only] Connect a second category 5, 5e, 6, 7 or 7a link cable

Summary of the content on the page No. 19

POWER OUT LINK TOLOCAL ON ™ ServSwitch Wizard VGA/USB B L A C K B O X K V M E X T E N D E R POWER OUT LINK TOLOCAL ON Wizard VGA/USB V M E X T E N D E R Chapter 3: Installation 3.2.2.5 Remote module power 1 Attach the output connector of the power adapter to the ‘POWER’ socket of the remote module as shown in Figure 3-20: Figure 3-20. Attaching the power adapter 2 Attach the IEC power cord to the power adapter body and insert the mains plug of the cord to a nearby power outlet as shown in Figur

Summary of the content on the page No. 20

ServSwitch Wizard VGA/USB 3.2.3 Dual user configuration You can combine two ServSwitch Wizard VGA-USB extender sets to create a dual user configuration. Such an installation would allow a single computer to be controlled from two different positions, with each position receiving the same audio visual output and having equal and concurrent control over the computer. Arbitration between the two positions is handled by the computer’s USB system and so this arrangement is better suited to situati


Alternative user manuals
# User manual Category Download
1 Black Box ACU5052A User manual Computer Accessories 10
2 Black Box Gigabit speed plus extra power for high-wattage devices User manual Computer Accessories 0
3 Black Box ACU3001A User manual Computer Accessories 2
4 Black Box KVT4IP16CATUV User manual Computer Accessories 0
5 Black Box ACU5051A User manual Computer Accessories 2
6 Black Box ACL0404A User manual Computer Accessories 1
7 Black Box IC64OA User manual Computer Accessories 0
8 Black Box KV1405A User manual Computer Accessories 0
9 Black Box 26681 User manual Computer Accessories 0
10 Black Box JPM614A-R7 User manual Computer Accessories 0
11 Black Box KV0004A-LED User manual Computer Accessories 4
12 Black Box gigatrue cat6 component level patch panels User manual Computer Accessories 0
13 Black Box ACU5250A-R2 User manual Computer Accessories 16
14 Black Box KV0004A-XTRA-LED User manual Computer Accessories 1
15 Black Box KV1406A User manual Computer Accessories 0
16 Sony VGC-RB50(G) User manual Computer Accessories 1
17 Sony Movie Studio HD Platinum Suite 11 MSPSMS11000 User manual Computer Accessories 177
18 Sony Hi-MD Walkman MCMD-R1 User manual Computer Accessories 7
19 Sony Sound Forge V.10.0 Pro SF-10000 User manual Computer Accessories 435
20 Sony Rechargable Battery Pack VGP-BPSC31 User manual Computer Accessories 23