Summary of the content on the page No. 1
CDU 5211 Series CDU 5211 Series
CD-ROM Drive
User’s Manual
Revision 1
Copyright 2001 - Sony Australia
NOTE: This manual is subject to change without notice.
Printed in Australia
Summary of the content on the page No. 2
Owner’s Record The model and serial numbers are located on the topside of the drive. Record these numbers in the space provided below. Refer to them whenever you call upon your sales representative regarding this product. Model No._________________ Serial No. _______________ WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. CAUTION The use of optical instruments
Summary of the content on the page No. 3
INFORMATION ACKNOWLEDGMENTS & TRADEMARKS You are cautioned that any changes or modifications not expressly approved in this All contents are subject to change at any time without notice. No responsibility is manual could void your warranty covering this equipment. assumed for its use; nor for infringements of patents or other rights of third parties and no patent or license is implied hereby. Note: This equipment has been tested and found to comply with the limits for a Class All trademarks
Summary of the content on the page No. 4
CONTENTS Warnings and Precautions 7 Introduction 8 Features........................................................................
Summary of the content on the page No. 5
WARNINGS & PRECAUTIONS WARNING - Possible voiding of Warranty Please be aware that cracked, deeply scratched or other poor quality discs used in this drive may cause damage to the drive and / or the data on the disc. Such discs may break at high speed rotation. If full care is not exercised in relation to this matter you may void the warranty of this product. PRECAUTIONS · Do not attempt to open the drive and service it. Removing the cover may cause exposure to harmful laser beams and elec
Summary of the content on the page No. 6
INTRODUCTION INTRODUCTION Features Software Requirements The CDU 5211 is an internal CD-Rom (Compact Disc - Read Only Memory) drive unit designed for use with personal computers. It comes Reading Data with the following features: For your computer to recognise your new CD-Rom drive and to be able to access data from it, the correct device drivers must be installed. General Most modern operating systems such as Microsoft® Windows 95™, • Speed: 52X max / 40X default. Windows 98™,
Summary of the content on the page No. 7
USING THE DRIVE USING THE DRIVE Front Panel “Maximum Speed Choice” function The CDU-5211 has a Maximum Speed Choice function where the user can select between maximum speeds of 40X or 52X. The drive always defaults to 40X. To activate 52X operation press and hold the Stop/Eject button for 5 seconds. The drive will then read the current disc at 52X speed. When the disc is ejected the drive will default back to 40X operation. 1 2 3 4 5 6 7 It is recommended that 52X operation only be activated un
Summary of the content on the page No. 8
INSTALLING THE DRIVE INSTALLING THE DRIVE System Requirements Connections and Settings There are three pairs of jumpers, MA (Master), SL (Slave) and CS (Cable Select) on To ensure stable performance, the following system specifications are recommended. the rear panel of your CD-ROM drive. Figure 1 shows the location of each jumper. OS DOS 6.xx or higher, Windows 3.1x, 95/98/ME/2000/ NT 4.0, OS/2 Warp 3.0 or higher. Rear of Drive Interface Vacant IDE interface connector Cable Select Digita
Summary of the content on the page No. 9
INSTALLING THE DRIVE TROUBLE-SHOOTING Connecting the IDE cable If you experience any trouble during installation or normal use of your CD-ROM drive, please refer to the following information. Most PC systems can connect up to 4 devices on the IDE ports. Your PC should consist You will find further information on our support web site: of a “Primary IDE Bus” and a “Secondary IDE Bus” each of which can have two http://www.sony.com.au/support/itp devices connected to it - a “Master device” and a
Summary of the content on the page No. 10
SPECIFICATIONS SPECIFICATIONS Environmental Conditions General Operating Temp 5°C to 45°C Host Interface ATA-PI compliant. Humidity 10% to 80% RH Acceptable Formats CD-DA, CD-Rom mode 1, CD-Rom/XA Altitude 0 ~ 3,500 m mode 2 form 1 & form 2, CD-I Ready, Non Operating Temp -35°C to 60°C Video CD (MPEG-1), Karaoke CD, Humidity 10% to 90% RH Photo CD, Enhanced CD, CD extra, Altitude 0 ~ 12,500 m I-Trax CD, CD-Text and UDF. Acceptable Medi
