Sony SDX-250V user manual

User manual for the device Sony SDX-250V

Device: Sony SDX-250V
Category: Computer Drive
Manufacturer: Sony
Size: 0.34 MB
Added : 9/5/2014
Number of pages: 36
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Sony SDX-250V. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Sony SDX-250V.

For your convenience

If looking through the Sony SDX-250V user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Sony SDX-250V on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Sony SDX-250V to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Sony SDX-250V User manual - Online PDF
Advertisement
« Page 1 of 36 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Sony SDX-250V but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Sony SDX-250V. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

2-546-777-11(1)
AIT Drive
User’s Guide
AIT-1 Turbo TAPE DRIVE
SDX-450V
AIT-E Turbo TAPE DRIVE
SDX-250V
 2004 Sony Corporation

Summary of the content on the page No. 2

This document contains proprietary VORSICHT information which is protected by Für Kunden in Deutschland copyright. Diese Ausrüstung erfüllt die All rights reserved. No part of this Europäischen EMC-Bestimmungen für document may be photocopied, die Verwendung in folgender / reproduced or translated to another folgenden Umgebung(en): language without prior written consent • Wohngegenden of Sony. • Gewerbegebiete The information contained in this document is subject to change without •Leichtindustr

Summary of the content on the page No. 3

IMPORTANT SAFEGUARDS USE For your protection, please read these Power Sources – This unit should be safety instructions completely before operated only from the type of power operating the appliance, and keep this source indicated on the marking label. manual for future reference. If you are not sure of the type of electrical power, consult your dealer or Carefully observe all warnings, local power company. precautions and instructions on the appliance, or the one described in the For the unit w

Summary of the content on the page No. 4

INSTALLATION SERVICE Water and Moisture – Do not use Damage Requiring Service – Unplug power-line operated units near water - the unit from the wall outlet and refer for example, near a bathtub, servicing to qualified service washbowl, kitchen sink, or laundry personnel under the following tub, in a wet basement, or near a conditions: swimming pool, etc. • When the power cord or plug is Power-Cord Protection – Route the damaged or frayed. power cord so that it is not likely to be • If liquid ha

Summary of the content on the page No. 5

Contents Overview .................................................................................................................. 6 Introduction .............................................................................................................. 7 About AIT Drives ............................................................................................ 7 Precautions ....................................................................................................... 9 Installat

Summary of the content on the page No. 6

Overview The Sony SDX-450V and SDX-250V drives are high capacity data storage devices using Advanced Intelligent tape (AIT) technology. The SDX-450V and SDX-250V drives achieve high data reliability through Read-After- Write, an additional level of Error Correction Code, and other features. The Sony SDX-450V and SDX-250V drives store data on tape using standard formats called AIT (Advanced Intelligent Tape) and ALDC formats. 6

Summary of the content on the page No. 7

Introduction About AIT Drives The SDX-450V is an internal AIT drive unit that uses data cartridges conforming to the AIT-1 Turbo format. The SDX-250V is an internal AIT drive unit that uses data cartridges conforming to the AIT-E Turbo format. The SDX-450V supports AIT-E Turbo, AIT-1 Turbo and AIT-1 formats. The SDX-250V supports only AIT-E Turbo format. Features The AIT Drive Unit SDX-450V has the following features: • Supports reading and writing to data cartridges conforming to the AIT-E Turb

Summary of the content on the page No. 8

The AIT Drive Unit SDX-250V has the following features: • Supports reading and writing to data cartridges conforming to the AIT-E Turbo format. • The third-level error correction code guarantee high data reliability. • Data compression provides 52 gigabytes of storage on 98 m tape-length *1 AIT-E Turbo data cartridge. The native capacity is 20 gigabytes of storage on 98 m tape-length AIT-E Turbo data cartridge. • Stored data are automatically checked for compression. • Wide Ultra SCSI LVD/SE int

Summary of the content on the page No. 9

Precautions Installation Avoid placing the drive in a location subject to: – high humidity – high temperature – mechanical shock and vibration – direct sunlight * For details, see “Specifications” on page 29. Operation • Do not move the drive while it is operating. It may cause malfunction. • Avoid exposing the drive to sudden changes from a low to high temperatures. This may cause water condensation to collect inside the drive. If the ambient temperature should suddenly rise while the drive is

Summary of the content on the page No. 10

Useable Cartridges The SDX-450V can be used with data cartridges marked with the AIT-E Turbo, AIT-1 Turbo or AIT-1 logo. The SDX-250V can be used with data cartridges marked with the AIT-E Turbo logo. Note • Be sure to use only the cartridges designed specifically for AIT. • Do not use anything but AIT cartridges with this system, as doing so can damage the AIT drive. Although commercially available 8mm videotapes resemble AIT cartridges in appearance, they have entirely different specifications

Summary of the content on the page No. 11

Installation SCSI Connection/Setting the SCSI ID SCSI ID SCSI ID 0 1 2 SCSI 68pin Connector 3 Power Connector Jumpers 4 4 3 2 1 5 5 V GND GND 12 V 6 7 8 9 Parity Disable 10 11 Enable 12 Note : = CLOSED/Jumper 13 = OPEN/Jumper not installed 14 = Don’t care 15 Parity Disable Jumper Parity check function can be disabled by Jumper. Parity check is disabled while left end jumper is installed. Parity generate function is always enabled. 11 P.D. N.C. 3 2 1 0 Parity Disable No Connection SCSI ID 3 SCS

Summary of the content on the page No. 12

Option Switches (DIP Switch) DIP Switch DIP Switch Positions Default 1 Drive Mode (OFF) 2 Drive Mode (OFF) ON 3 Drive Mode (OFF) OFF 4 Drive Mode (OFF) 5 Terminator Power (ON) 6 Periodic Cleaning Req 12345678 (ON) 7 DC Control (1) (ON) 8 DC Control (2) (OFF) 12

Summary of the content on the page No. 13

* DR (Disaster Recovery ) Mode 1 Drive Mode (ON) 2 Drive Mode ON 3 Drive Mode OFF 4 Drive Mode 5 Terminator Power 6 Periodic Cleaning Req 12345678 7 DC Control (1) 8 DC Control (2) * In Disaster Recovery Mode, the drive enters the DR Standby Mode 15 seconds after you insert a write-protected tape into the drive, and all the drive LED blink. If you restart the drive while the LED are blinking, it starts as a CD-ROM device. For details about the Disaster Recovery Mode, refer to the instruction man

Summary of the content on the page No. 14

Cleaning Request Mode Periodic cleaning requests can be enabled by a DIP switch. 1 Drive Mode 2 Drive Mode ON 3 Drive Mode OFF 4 Drive Mode 5 Terminator Power 6 Periodic Cleaning Req (ON) 12345678 7 DC Control (1) 8 DC Control (2) When switch 6 is ON, cleaning requests are enabled. When enabled, the “CLEANING REQUEST” LED on the front panel lights after every 100 hours of operation. When this LED lights, clean the drive with a head cleaning cartridge. Note To maintain the drive in optimum condit

Summary of the content on the page No. 15

Mounting Holes For 3.5" Standard Height _ + _ + 7.6 0.5 mm [0.3" 0.02"] 6-M3 (depth 2.5mm [0.10"] max.) 6-M3 (depth 2.5mm [0.10"] max.) _ + 4.8 0.5mm _ _ 94.0 0.5mm [3.70" 0.02"] + + _ + [0.19" 0.02"] _ _ _ + + 41.2 0.5mm + 101.6 0.5mm [4.00" 0.02"] _ [1.62" 0.02"] + 15 _ 60.0 0.3mm + _ [2.36" 0.01"] + _ + 21.0 0.3mm _ _ _ [0.83" 0.01"] + 90.0 0.3mm [3.54" 0.01"] + + _ 9.8 0.6 mm + _ _ [0.39" 0.02"] + + _ 7.4 0.6mm [0.29" 0.02"] + _ _ 155.0 0.5mm [6.10

Summary of the content on the page No. 16

For 5.25" Half Height _ _ + + 7.6 0.5 mm [0.3" 0.02"] 6-M3 4-M3 _ + 9.9 0.5mm _ [0.39" 0.02"] + _ _ + + _ 94.0 0.5mm [3.70" 0.02"] + 21.8 0.5mm _ [0.86" 0.02"] + _ _ 139.6 0.5mm [5.50" 0.02"] + + _ 41.2 0.5mm + _ _ _ 146.0 0.5mm [5.75" 0.02"] + + [1.62" 0.02"] + _ + _ 149.0 0.5mm [5.87" 0.02"] + 16 7.0mm _ _ 79.2 0.3mm [3.12" 0.01"] + + [0.28"] _ 47.5 0.3mm + _ _ _ + + [1.87" 0.01"] + 79.2 0.3mm [3.12" 0.01"] _ _ _ + _ + + 7.4 0.6mm [0.29" 0.02"]

Summary of the content on the page No. 17

Reconfiguring from 5.25" Model to 3.5" Model You can reconfigure the 5.25" model to the 3.5" model yourself. 1 Remove the 2 screws for each side rail. 2 Take the side rail off. Side Rail (L) Side Rail (R) 17

Summary of the content on the page No. 18

Orientation 10 10 10 10 ° ° ° ° 10 10 ° ° 10 ° 10° 18

Summary of the content on the page No. 19

Attaching and Removing the Dust Cover Attaching the Dust Cover 1 Align the dust cover’s hinge clips (one on each side) with the pins of the drive bezel. * • The dust cover should be positioned so that the magnets on the cover’s back face the drive bezel. * This magnet does not affect the tape of the cartridge. • Holding the dust cover at an angle as shown in the figure below, set the hinge clips on top of the bezel pins, positioning them so that they bracket the pins. 19

Summary of the content on the page No. 20

2 Press down at an angle on each side in turn until you hear the hinge clips click into place. Caution Do not press the dust cover in horizontally from the front. Doing so could cause the dust cover to break. 3 Close the dust cover. This completes attachment of the dust cover. 20


Alternative user manuals
# User manual Category Download
1 Sony MSH-128S2 User manual Computer Drive 2
2 Sony 2GB Flash Drive USM2GLX User manual Computer Drive 0
3 Sony SAITE1300-F User manual Computer Drive 0
4 Sony CRX - 160E User manual Computer Drive 0
5 Sony 2GN User manual Computer Drive 0
6 Sony 7819900133 User manual Computer Drive 0
7 Sony USM512U2 User manual Computer Drive 0
8 Sony DRX-S70U-W User manual Computer Drive 22
9 Sony BDX-S500U User manual Computer Drive 29
10 Sony 500gb External Hard Disk Drive HDEG5/B User manual Computer Drive 1
11 Sony VAIO VPCSB User manual Computer Drive 39
12 Sony 500gb External Hard Disk Drive HDEG5B User manual Computer Drive 2
13 Sony 2-586-675-11 (1) User manual Computer Drive 0
14 Sony BW-RU101 User manual Computer Drive 5
15 Sony CRX10U User manual Computer Drive 0
16 Sony MSH-128S2 User manual Computer Drive 2
17 Sony 2GB Flash Drive USM2GLX User manual Computer Drive 0
18 Sony SAITE1300-F User manual Computer Drive 0
19 Sony CRX - 160E User manual Computer Drive 0
20 Sony 2GN User manual Computer Drive 0