Summary of the content on the page No. 1
SNU6500
EN
User manual 1
Summary of the content on the page No. 2
Helpline ☎ Nederland België/Belgique/Belgien 0900 0400 063 (. 0.20) 070 253 010 (. 0.17) Norge Luxemburg/Luxembourg 2270 8250 26 84 30 00 Österreich Danmark 01 546 575 603 (low rate) 3525 8761 Portugal Deutschland 2 1359 1440 0180 5 007 532 (. 0.12) Schweiz/Suisse/Svizzera España 02 2310 2116 902 888 785 (. 0.15) Suomi France 09 2290 1908 08 9165 0006 (. 0.23) Sverige 08 632 0016 0 0800 3122 1223 UK (United Kingdom) Ireland 0906 1010 017 (£ 0.15) 01 601 1161 Italia 199 404 042 (
Summary of the content on the page No. 3
Contents EN 4Important safety information 4Safety Precautions 4 Environmental information 4Disclaimer 5What’s in the box 6Introduction 6What are wireless network connections? 6Factors determining your network range and network speed 6 Securing your wireless network 7Your Wireless USB Adapter 11g True Turbo 108 Mbps 8Install 8Install the drivers 10 Connect 11 Advanced 11 Securing your wireless network 12 Setup of an Ad Hoc computer network 13 Accessing your wireless network setting. 13 What do th
Summary of the content on the page No. 4
Important safety information EN •Please install and connect the product in the order as described in the “Quick Start Guide” booklet only. This assures best installation results with the least technical hassles. •Please read this manual and the “Quick Start Guide” booklet carefully before using the Wireless USB Adapter 11g True Turbo 108 Mbps; and keep these documents for future reference. •The most recent downloads and information on this product will be available through our web site www.phili
Summary of the content on the page No. 5
What’s in the box EN Wireless USB Adapter 11g True Turbo USB 2.0 cable 108 Mbps Quick Start Guide Installation CD What else you’ll need or Computer Wireless Base station Other wireless devices USB port Windows 2000/XP 5
Summary of the content on the page No. 6
Introduction EN SNU6500 Thank you for purchasing the Philips Wireless USB Adapter 11g True Turbo 108 Mbps. This Wireless USB Adapter 11g True Turbo 108 Mbps is a WiFi (IEEE 802.11g) compatible USB device. It fully supports high data rates up to 108 Mbps with automatic fallback to lower speeds for secure operation at lower data rates in even the most difficult of wireless environments. In this manual we will expand on how to install, configure, and use your Wireless USB Adapter 11g True Turbo 108
Summary of the content on the page No. 7
Your Wireless USB Adapter 11g True Turbo 108 Mbps EN 1USB Connector to PC For connecting the Wireless USB Adapter 11g True Turbo 108 Mbps to the USB port of your PC. The difference between USB 2.0 and USB 1.1: - USB 2.0 wireless speed is max. 108 Mbps - USB 1.1 wireless speed is max. 11 Mbps 2Integrated antenna Built-in antenna for establishing wireless connections. 3Indicator LED Displays the network status. LED LED Meaning colour • Off when not connected or with PC switched off. PWR/ACT Blue •
Summary of the content on the page No. 8
Install EN Install the drivers Place the Installation CD in the CD-drive Select Agree If this screen does not appear, start the CD manually 1 Open My Computer 2 Open CD-drive 3 Open Setup.exe Click on the Wireless USB Adapter 11g True Turbo 108 Mbps photo Click on Install software Choose your situation: Either: Infrastructure (a) Or: Ad-Hoc (b) Click Click 8
Summary of the content on the page No. 9
EN Wait until you see this window Connect your Wireless USB Adapter 11g True Turbo 108 Mbps to the computer 1Take the USB cable 2Plug the square connector of the USB cable into the Wireless USB Adapter 11g True Turbo 108 Mbps 3Plug the Wireless USB Adapter 11g True Turbo 108 Mbps into one of the USB ports on your computer The difference between USB 2.0 and USB 1.1: - USB 2.0 wireless speed is max. 108 Mbps - USB 1.1 wireless speed is max. 11 Mbps Click on finish > Your Wireless USB Adapter 11g
Summary of the content on the page No. 10
Connect EN Connect to your network Start Philips Wireless Network Manager program Double click on the tray icon If the Philips Wireless Network Manager does not start, double-click this icon View the available wireless networks 1 Select Site Survey 2 Click on Scan 3Double click on your wireless Network Name When asked: Input Security settings 1 Select your Authentication Type 2 Select your Key Type if applicable 3 Select Use Passphrase if applicable 4 Enter your encryption Key See the user manu
Summary of the content on the page No. 11
Advanced EN Securing your wireless network Start Philips Wireless Network Manager program Double click on the tray icon If the Philips Wireless Network Manager does not start, double-click this icon. Go to security settings 1 Select Configuration tab 2 Select Security tab 3Click on Security off, to switch it on Input Security settings 1 Select your Authentication Type 2 Select your Key Type if applicable 3 Select Use Passphrase if applicable 4 Enter your encryption Key See the user manual of yo
Summary of the content on the page No. 12
EN Setup of an Ad Hoc computer network Start Philips Wireless Network Manager program Double click on the tray icon If the Philips Wireless Network Manager does not start, double-click this icon. Create an Ad-Hoc wireless network 1 Click on Configuration 2 Click on Common 3 Enter the wireless Network Name (SSID) 4 Select Ad-Hoc as operating mode 5 Select the Network Type Go to the Security settings 1 Select Security tab 2Click on Security off, to switch it on Setup the encryption 1 Select your
Summary of the content on the page No. 13
EN Accessing your wireless network setting. Start Philips Wireless Network Manager program Double click on the tray icon If the Philips Wireless Network Manager does not start, double-click this icon. What do the settings mean The Philips Wireless Network Manager program has five main tabs with information and settings. Note: The Wireless On/Off button appears on the bottom of every tab to give you control over enabling and disabling the wireless link. • Configuration The Configuration tab lets
Summary of the content on the page No. 14
EN • Configuration – sub-tab Security First, click the Security ON/OFF button to enable or disable wireless security. Authentication Type – Choose WEP or WPA-PSK depending on the type of wireless security in the rest of your wireless network. Wired Equivalent Privacy (WEP) and WiFi Protected Access (WPA) are implemented in the adapter to prevent unauthorized access to your wireless network. Key Type – For more secure data transmissions, set encryption to the highest number of bits. E.g. a 128-bi
Summary of the content on the page No. 15
EN • Site Survey Selecting the Site Survey tab displays a list of available wireless network access points. Next, click Scan to update the list. It shows you the following information: • Network type shows the network setup • The name of the wireless connection (Network Name, or SSID) • Network mode shows which WIFI standard is used • An icon reflecting if encryption is enabled • Signal strength • Channel that is used by the network • MAC address of the device Double-click one of the network nam
Summary of the content on the page No. 16
Network terminology EN Read this chapter if you want to know how to interpret the terminology used in this manual. A network provides a means of communication between two or more computers (and other devices) that are connected to each other through wired or wireless means. At each computer, you will need a network adapter or Network Interface Card WIRED (NIC) to be able to connect the computer to the network cable. Examples are: Ethernet cable Ethernet notebook adapter Already built-in ETHERNET
Summary of the content on the page No. 17
EN In a network, the computers need to be able to connect to each other physically. Therefore, another important network property is how the computers connect to each other, either directly or through a central device. ONE-ON-ONE WIRED NETWORK also known as: Direct connection (max. 2 PCs) NOTE: Use a crossover Ethernet cable to connect two computers directly to each other. WIRED NETWORK WITH MORE THAN 2 PCs Use a hub or switch to connect more than 2 PCs to each other. NOTE: Use straight-through
Summary of the content on the page No. 18
Glossary of terms EN DHCP – Dynamic Host Configuration Protocol. This protocol automatically configures the TCP/IP settings of every computer on your home network. DNS Server Address – DNS stands for Domain Name System, which allows Internet host computers to have a domain name and one or more IP addresses. A DNS server keeps a database of host computers and their respective domain names and IP addresses, so that when a domain name is requested, the user is sent to the proper IP address. The DN
Summary of the content on the page No. 19
Technical specifications EN Radio IEEE 802.11g Radio Technology Direct Sequence Spread Spectrum (DSSS) Orthological Frequency Division Multiplexing (OFDM) Antenna Type Built-in antenna Data Rate 1 / 2 / 5.5 / 6 / 9 / 11 / 12 / 18 / 24 / 36 / 48 / 54 / 72 / 96 / 108 Mbps Host interface USB specification version 2.0 (max. 108 Mbps) & 1.1 (max. 11 Mbps) Power consumption send / receive Approx. 500 mA / 420 mA Dimensions (h x w x d) 22 x 79 x 93 mm Weight Approx. 55 g (adapter only) Operating Temp
Summary of the content on the page No. 20
EN Problem Possible cause Solution NETWORK CONNECTION PROBLEMS If the Link LED on PC or other network Make sure the computer and other the Wireless USB devices switched off. network devices are receiving power. Adapter 11g True Turbo 108 Mbps does not light, or if you cannot access any network resources from the computer. No access to a Service unavailable. Check that you have enabled and Windows or Net- configured the service correctly. Ware service on the If you cannot connect to a part
