Summary of the content on the page No. 1
Wireless USB Hub
Belkin Tech Support Belkin B.V.
US: 310-898-1100, ext. 2263 Boeing Avenue 333
800-223-5546, ext. 2263 1119 PH Schiphol-Rijk, The Netherlands
UK: 0845 607 77 87 +31 (0) 20 654 7300
Australia: 1800 235 546 +31 (0) 20 654 7349 fax
New Zealand: 0800 235 546
Singapore: 65 64857620 Belkin Ltd.
Europe: www.belkin.com/support 4 Pioneer Avenue
Tuggerah Business Park
Belkin International, Inc. Tuggerah, NSW 2259, Australia
501 West Walnut Street +61 (0) 2 4350 4600
Los Angeles, CA 90220,
Summary of the content on the page No. 2
Wireless USB Hub User Manual F5U303
Summary of the content on the page No. 3
Summary of the content on the page No. 4
Table of Contents 1. Introduction ....................................................................1 Features ........................................................................ 2 System Requirements ................................................... 2 Package Contents ......................................................... 2 Product Description ...................................................... 3 2. Installation ....................................................................
Summary of the content on the page No. 5
E
Summary of the content on the page No. 6
Introduction Congratulations and thank you for purchasing the Belkin 1 Wireless USB Hub. This revolutionary product lets you connect your USB devices to your computer—wirelessly. Now you can print, play music, scan, download photos, 2 and burn CDs, without the hassle of connecting cables. The Hub is easy to use and gives you the freedom to roam—and stay connected. 3 Please review this User Manual carefully so that you are sure to get the most from your Wireless USB Hub. 4 5 6 Wireless USB
Summary of the content on the page No. 7
Introduction Features 1 • Wir eless connectivity through USB technology for printers, cameras, hard drives, and other USB devices to 2 your computer • Reduced cable clutter 3 • Ports for linking up to 4 high-, full-, and low-speed devices with your computer • Belkin Lifetime Warranty 4 System Requirements 5 TM • Windows Vista 32-/64-bit operating system 6 Package Contents • Wireless USB Hub • Power Adapter • USB Cable (A to mini-B) • User Manual • Quick Start Guide 2
Summary of the content on the page No. 8
Introduction Product Description 1 Downstream USB Ports: 4 Per-Port Voltage: 5V Per-Port Current: 500mA 2 Power Mode: Self-powered 3 Power Supply: Input: 100–240 50/60Hz Output: 5V DC, 3A 4 Plug Size: 3.5mm Plug Polarity: Center-pin positive 5 LED Indicators on Hub: 6 Wireless Status LED Color: Blue Status: Constant on, when power supply is connected; blinks to indicate a wireless connection USB Port Status LED Color: Green Status: Off: No USB device plugged in (or device not
Summary of the content on the page No. 9
Installation Association Procedures 1 Two methods exist to assist you in setting up the wireless security and association with your Hub: PIN and Cable. 2 3 4 5 6 4
Summary of the content on the page No. 10
Installation PIN-Association Procedure 1 When you initially set up the Hub, you must “associate” it with the host computer. To do this, enter the PIN (product identification number) found on the bottom of the Hub into 2 the Wireless USB Manager. This “PIN association” procedure is one of two supported methods to establish a secure wireless connection. 3 1. Plug the power supply into the wall, and then plug the DC connector into the Hub. 4 2. Open the Wireless USB Manager to set up the H
Summary of the content on the page No. 11
Installation Cable-Association Procedure 1 When you initially set up the Hub, you must “associate” it with the host computer. To do this, connect the Hub to your computer using the provided USB cable. This “cable 2 association” procedure is the second optional method of establishing a secure wireless connection. 3 1. Plug the power supply into the wall, and then plug the DC connector into the Hub. 4 2. Attach the Hub to your computer using a standard USB cable (mini-B to USB-A connector
Summary of the content on the page No. 12
Installation Automatic Connect Feature 1 2 3 4 5 6 When the association procedure is completed, the Hub by default automatically connects to the host computer whenever it is within operating range. If desired, you can select another method for how the Hub will wirelessly connect to your computer. This setup may be changed later. 7
Summary of the content on the page No. 13
Installation Confi rming Proper Installation 1 To confirm that the Wireless USB Hub is properly installed, check the Windows Device Manager. In the Device Manager, you should see: “Belkin Wireless USB Hub” and “Dell 2 Wireless 400 Host Wire Adapter”. 3 4 5 6 8 8 8
Summary of the content on the page No. 14
Operation Proper Orientation of Antennas 1 2 3 4 By design, Ultra-Wideband technology (UWB) radios 5 transmit at very low power levels. To achieve peak performance, it is important to properly orient the antennas on the Hub and your laptop. 6 As a general rule, the antennas should be positioned in a vertical orientation relative to the horizontal plane. As the antenna is integrated behind the laptop screen, we recommend maintaining the screen vertical for optimal wireless communication. P
Summary of the content on the page No. 15
Operation Using the Wireless USB Manager 1 The user interface for the Wireless USB Manager consists of a window with three buttons. These buttons are: 2 • Settings • Device 3 • Help 4 5 6 These three buttons within the Wireless USB Manager will provide diagnostics, options, customization, and help with your Wireless USB Hub. Clicking on the “Settings” button will allow you to add a new connection and more through the “Options” button. 10
Summary of the content on the page No. 16
Operation Options 1 There are three tabs in the “Options” section of the Wireless USB Manager. General: This section will show the computer name 2 associated with your laptop as well as the MAC (media access control) address of the internal Wireless Host 3 Adapter. There is also a toggle button to enable and disable the internal Wireless USB Adapter. 4 5 6 11
Summary of the content on the page No. 17
Operation Diagnostics: This section of the utility will allow you to 1 diagnose problems related to the wireless connection. Check the desired boxes and click “Run” to perform the diagnostics test. The log will generate detailed information 2 on the status of the hardware. 3 4 5 6 12
Summary of the content on the page No. 18
Operation Advanced Options: This section offers a power 1 management option as well as the ability to change channels and throughput enhancements. If you are experiencing wireless connection problems, you may want to try changing 2 the wireless channel. For optimal performance, use channel 13. 3 4 5 6 13
Summary of the content on the page No. 19
Operation The icon on the main screen of the Wireless USB Manager 1 will show your connection status and will allow you to disconnect from the Hub or delete a wireless entry. You can also choose the connection mode with the Hub. These 2 options include Automatic, Prompt to Connect, or Manual. The icon for the Wireless USB Hub is not fixed and can be changed if desired. Right-click on the icon to display 3 these options. 4 5 6 14
Summary of the content on the page No. 20
Operation System Tray 1 When the Wireless USB Manager is running, the “Wireless USB Manager” icon displays in the Windows System Tray. Place your mouse over the icon to see whether the radio is 2 enabled or disabled. 3 4 5 Right-clicking this icon gives you the option to exit the application, hide/show the application window, disable/ enable the radio, or access Help and About information. 6 Double-clicking this icon will bring up the “Wireless USB Manager” application window. Alternatively
