Acnodes RMC 7152 user manual

Summary of the content on the page No. 1

RMC 7152
14 short depth server
Installation Guide
RMC 7152: 14” short depth server with two Intel Xeon
processors
1
© Copyright 2009 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3 All rights reserved. Product description and product specifications
Walnut, CA 91789 are subject to change without notice. For latest product information,
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com please visit Acnodes web site at www.acnodes.com.

Summary of the content on the page No. 2

RMC 7152 14 short depth server PC 5150 15-inch touch panel PC 2.4 Installing the System into a Rack This section provides information on installing the RMC 7152 into a rack. If the system has already been mounted into a rack, you can skip ahead to Sections 2-5 and 2-6. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. The following is a guideline for installing the unit into a rack with the rack rails provided with the system. You s

Summary of the content on the page No. 3

RMC 7152 14 short depth server Installing the Chassis Rails Position the fixed chassis rail sections you just removed along the side of the chassis making sure the five screw holes line up. Note that these two rails are left/right specific. Screw the rail securely to the side of the chassis (see Figure 2-2). Repeat this procedure for the other rail on the other side of the chassis. You will also need to attach the rail brackets when installing into a telco rack. Locking Tabs: As you have seen,

Summary of the content on the page No. 4

RMC 7152 14 short depth server PC 5150 15-inch touch panel PC Installing the Rack Rails Determine where you want to place the RMC 7152 in the rack ( see Rack and Server Precautions in Section 2-3) . Position the fixed rack rail/sliding rail guide assemblies at the desired location in the rack, keeping the sliding rail guide facing the inside of the rack. Screw the assembly securely to the rack using the brackets provided. Attach the other assembly to the other side of the rack, making sure th

Summary of the content on the page No. 5

RMC 7152 14 short depth server Installing the Server into a Telco Rack If you are installing the RMC 7152 into a Telco type rack, follow the direc- tions given on the previous pages for rack installa- tion. The only difference in the installation procedure will be the positioning of the rack brackets to the rack. They should be spaced apart just enough to accomodate the width of the telco rack. 5 © Copyright 2009 Acnodes, Inc. 661 Brea Canyon Rd., Suite 3 All rights reserved. Product descriptio