Avenview C-VGA-DVI user manual

Summary of the content on the page No. 1

VGA to DVI Converter
User’s Guide

Models
C-VGA-DVI














© 2008 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to
specifications and product descriptions at any time without notice. No license, whether express,

Summary of the content on the page No. 2

Table of Contents Section 1: Getting Started ...................................................................................................................... 3 1.1 Important Safeguards ............................................................................................................ 3 1.2 Safety Instructions ................................................................................................................. 4 1.3 Regulatory Notices Federal Communications Commi

Summary of the content on the page No. 3

Section 1: Getting Started 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover  Any product, on which the serial number has been defaced, modified or removed.  Damage, deterioration or malfunction resulting from: Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized  product modification, or failure to follow instructions

Summary of the content on the page No. 4

1.2 Safety Instructions Do not dismantle the housing or modify the module.   Dismantling the housing or modifying the module may result in electrical shock or burn.  Refer all servicing to qualified service personnel. Do not attempt to service this product yourself as opening or removing housing may expose you to  dangerous voltage or other hazards  Keep the module away from liquids.  Spillage into the housing may result in fire, electrical shock, or equipment damage. If an obj

Summary of the content on the page No. 5

1.6 Before Installation  Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.  Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.  Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. 1.7 Installation Follow these steps to connect Avenview C-VGA-DVI converter: 1. Connect VGA signal fro

Summary of the content on the page No. 6

1.8 General Troubleshooting Problem Possible Solution  Check if the PC Power is on  Check if connection to the computer and monitor or TV is No Image correct.  Turn the PC Power off and on again.  Check if C-VGA-DVI power adapter is connected  This product supports up to UXGA resolution. Screen Defects Appear  Check the maximum resolution range of the graphics card. 1.9 Caution 1. Do not put heavy object on top of the C-VGA-DVI. It may cause product malfunction. 2. Put

Summary of the content on the page No. 7

Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequent