Summary of the content on the page No. 1
VAX 7000 Model 810
V2.3—25 January 1999
Systems and Options Catalog
Product Description VAX 7000 Enterprise Servers are part of a family of OpenVMS based systems
designed for the rigorous demands of data center computing. They have a
modular platform which enables users to improve performance in a number of
different dimensions— symmetric multiprocessing, larger memory, more I/O
bandwidth, greater disk capacity, and OpenVMS Cluster systems. VAX 7000
servers support additional I/O controllers, s
Summary of the content on the page No. 2
VAX 7000 Model 810 Step 1—Systems The following items are required. Note: A second power regulator is required when configuring five and six processor systems. OpenVMS user licenses may be ordered as needed. 1 OpenVMS V5.5-2 , V6.1, V6.2, V7.1 or V7.2. System disk device InfoServer 1000 Local Area CD-ROM for initial booting Console terminal of system console. VAXcluster Software license for each system when CIXCD (CI) controller, KFMSA (DSSI) disk/tape multiple systems are used in a
Summary of the content on the page No. 3
VAX 7000 Model 810 S tep 2—Memory S elect additional memory if required; maximum 3.5 GB per system. New systems can be expanded in any combination of arrays listed below. Systems running OpenVMS V5.5-2 are restricted to 512 MB maximum memory. MS7AA-DA 512 M B memory array MS7AA-FA 2 G B memory array Step 3—Storage Select storage devices as required. See Storage Devices for ordering information. Step 3a—Storage Controller(s)/CI Controller Ba se systems require selection of storage controller
Summary of the content on the page No. 4
VAX 7000 Model 810 Step 3c—External Storage The following list describes available storage devices, capacities, and components included with initial offerings; supported options can be added as required. See Storage Devices for ordering information. Storage Arrays Capacity Storage Array Disk Drive Components S W5xx, SW8xx 6–227 G B SC SI disk drives Disk Drives Capacity R Z26N SCSI 1.05 GB RZ28 SCSI 2.1 GB RZ29B SCSI 4.3 GB Tape Drives T Z89N 35/70 GB 5.25-inch SCSI tape drive TZ889 280 G B S
Summary of the content on the page No. 5
VAX 7000 Model 810 Ste p 4—System Cabinet and I/O Expansion Cabinet (continued) I/O Expansion Cabinet H7263-AA/AB 48 V power regulator, 60/50 Hz; maximum three per cabinet (one included). Second regulator may be required to supply adequate power depending on configuration. See power configuration table that follows. Third regulator assures redundancy and higher availability in the event of power regulator failure. Note: The power configuration table provides manual method of determining the ne
Summary of the content on the page No. 6
VAX 7000 Model 810 S tep 6—OpenVMS Cluster Options For OpenVMS Cluster configurations, select appropriate OpenVMS Cluster options. CI controller, BNCIA cables, and VAXcluster Software license required. HSJ50-AF/AH/AJ S torageWorks array controller, supports up to 36 SCSI-2 devices. Includes 32/64/128 MB Read Cache and controller based disk striping. HSD10-BF StorageWorks array controller; supports up to seven SCSI-2 devices. HSD30-CD/CF S torageWorks array controller; supports up to 18 SCSI
Summary of the content on the page No. 7
VAX 7000 Model 810 S tep 9—Software (continued) OpenVMS VAX Distributed Interactive User Licenses Ope nVMS VAX Distributed Interactive User Licenses are for customers running OpenVMS VAX V6.0 to V 6.1, see above note. Op enVMS VAX Distributed Interactive User licenses provide the right to interactively use the operating system by the specified number of Interactive Users on a designated OpenVMS VAX system. OpenVMS VAX Distributed Interactive User licenses can be moved from one OpenVMS VAX system
Summary of the content on the page No. 8
VAX 7000 Model 810 S tep 10—Environmental Power Products Power Configuration Table EPU Values Total EPU Values Total System EPU Expansion EPU Cabinet (Quantity Cabinet (Quantity Options Options Quantity times EPU) Options Quantity times EPU) Base System includes power regulator, I/O port 30 1 30 – module, CPU module, memory module, XMI I/O channel, DEMNA I/O expansion cabinet (H9F00-BA/BB/BC)–010 includes power regulator Additional CPU modules 7 – MS7AA-BA 128 MB of memory 10 – MS7AA-CA 256 MB o
Summary of the content on the page No. 9
VAX 7000 Model 810 Specifications Physical Characteristics Operating Shipping Height 170.0 cm (67.0 in.) 195.0 cm (76.7 in.) Width 80.0 cm (31.5 in.) 109.5 cm (43.1 in.) Depth 87.5 cm (34.4 in.) 121.0 cm (47.5 in.) Weight, full configuration Without batteries 408 kg (900 lb) 448 kg (1000 lb) With batteries 545 kg (1200 lb) 585 kg (1300 lb) Clearances Operating Service Front 1.0 m (40 in.) 1.5 m (59 in.) Rear 1.0 m (40 in.) 1.0 m (40 in.) Environmental Operating Nonoperating Temperature 15° to 28
