Summary of the content on the page No. 1
SYSTEM BOARD D1321
SYSTEM BOARD D1321
TECHNICAL MANUAL
TECHNICAL MANUAL
Summary of the content on the page No. 2
Sie haben ... ... technische Fragen oder Probleme? Wenden Sie sich bitte an: • Ihren zuständigen Vertriebspartner • Ihre Verkaufsstelle Weitere Informationen finden Sie im Handbuch "Sicherheit, Garantie und Ergonomie". Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet: http://www.fujitsu-siemens.com Are there ... ... any technical problems or other questions you need clarified? Please contact: • your sales partner • your sales outlet You will find further in
Summary of the content on the page No. 3
Summary of the content on the page No. 4
Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.: A26361-D1321-Z120-1-7419 Printed in the Federal Republic of Germany AG
Summary of the content on the page No. 5
Deutsch English Systembaugruppe D1321 System Board D1321 Technisches Handbuch Technical Manual Ausgabe August 2001 August 2001 edition
Summary of the content on the page No. 6
Intel, Pentium und Celeron sind eingetragene der Intel Corporation, USA. Microsoft, MS, MS-DOS und Windows sind eingetragene Warenzeichen der Microsoft Corporation. PS/2 und OS/2 Warp sind eingetragene Warenzeichen von International Business Machines, Inc. Alle weiteren genannten Warenzeichen sind Warenzeichen oder eingetragene Warenzeichen der jeweiligen Inhaber und werden als geschützt anerkannt. Copyright Fujitsu Siemens Computers GmbH 2001 Alle Rechte vorbehalten, insbesondere (auch auszug
Summary of the content on the page No. 7
Contents Introduction........................................................................................................................................1 Notational conventions ..............................................................................................................1 Important notes .................................................................................................................................1 Information about boards...................................
Summary of the content on the page No. 8
Summary of the content on the page No. 9
Introduction Depending on the configuration chosen, some of the hardware components described may not be available on your system board. i You will find further information in the "BIOS Setup" description. Further information about drivers is provided in the readme files on the hard disk, on the supplied drivers diskettes, on the "Drivers & Utilities" or on the "ServerStart" CD. Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular atte
Summary of the content on the page No. 10
Important notes The shipped version of this board complies with the requirements of the EEC directive 89/336/EEC "Electromagnetic compatibility". Compliance was tested in a typical PC configuration. When installing the board, refer to the specific installation information in the Operating Manual or Technical Manual for the receiving device. Connecting cables for peripherals must be adequately shielded to avoid interference. Components can become very hot during operation. Ensure you do not touch
Summary of the content on the page No. 11
Features Features The components and connectors marked are not necessarily present on the system board. • System board in µATX format • mPGA478 Intel processor Pentium 4 with 400 MHz Front Side. Pentium 4 processors support MMX technology and Intel Streaming SIMD Extensions. The size and frequency of first-level cache and second-level cache are dependent upon the processor used. • Intel chipset 845 • Intel 82559ET LAN controller (10/100 Mbit/s) with RJ45 interface WOL with Magic Packet is suppo
Summary of the content on the page No. 12
Features • 1 AGP slot The AGP slot supports 1x, 2x and 4x AGP mode. Only AGP boards with 1.5 V are supported. • IDE hard disk controller connected to PCI bus for up to four IDE drives (e.g. IDE hard disk drives, ATAPI CD-ROM drives) The IDE hard disk controller are ATA33/66/100, ultra DMA capable and support PIO modes 0- 4. • Floppy disk drive controller (possible formats: 720 KB, 1.44 MB, 2.88 MB) • The system board supports booting from a 120 MB IDE floppy disk drive. • Real-time clock/calenda
Summary of the content on the page No. 13
Features Internal ports and connectors 12 3 4 5 6 7 8 DIMM 3 DIMM 2 DIMM 1 9 14 10 13 12 11 1 = Power supply ATX 9 = USB ports C / D * 2 = Floppy Disk Drive 10 = Wake On LAN 3 = IDE drives 3 and 4 (secondary) 11 = CD audio input 4 = Connector for control panel and 12 = AUX audio input loudspeaker 13 = Power supply +12 V 5 = IDE drives 1 and 2 (primary) 14 = Fan 1 (e.g. for the processor) 6 = Voltage indicator LED 7 = Fan 2 8 = Cover monitoring The components and connectors marked a
Summary of the content on the page No. 14
Features Hard disk connection An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for the ultra ATA/66or ultra ATA/100 mode. Ê Connect the end of the cable marked with blue to the system board. LAN connector This system board has an optional Intel 82550ET LAN controller which supports transfer speeds of 10 Mbit/s and 100 Mbit/s. The LAN controller is equipped with a 3 KB transmission and receiving buffer (FIFO) and supports WOL function through Magic Pac
Summary of the content on the page No. 15
Settings with switches and jumpers Settings with switches and jumpers Switch 1 = must always be set to off Switch 2 = System BIOS recovery ON Switch 3 = must always be set to off 12 3 4 Switch 4 = must always be set to off The clock frequency of the processor is set automatically. i Recovering System BIOS - switch 2 Switch 2 enables recovery of the old system BIOS after an attempt to update has failed. To restore the old system BIOS you need a Flash BIOS Diskette (please call our customer servic
Summary of the content on the page No. 16
Add-on modules Add-on modules Exit Suspend mode, switch off the device and remove the power plug from the mains supply, before carrying out any of the procedures described in this chapter! ! Even when you have switched off the device, parts (e.g. memory modules, AGP and PCI extension boards) are still supplied with power. The voltage indicator LED will glow if this is the case. All PCI slots support 3.3 V main and auxiliary voltages. AGP boards support 1,5 V main and auxiliary voltages. 5 4 DIMM
Summary of the content on the page No. 17
Add-on modules Installing and removing processors 2 2 3 3 4 4 5 5 1 1 A A Ê Pull the lever in the direction of the arrow (1) and lift it as far as it will go (2). Ê Remove the old processor from the socket (3). Ê Insert the new processor in the socket so that the angled corner of the processor matches the coding on the socket (A) with regard to the position (4). The angled corner of the processor may be covered by the heat sink. In this case let yourself be guided by the marking in the rows of p
Summary of the content on the page No. 18
Add-on modules Upgrading main memory These slots are suitable for DIMM format 32, 64, 128, 256, 512, 1024 MB SDRAM memory modules. Memory modules with different memory capacities can be combined. You may only use unbuffered 3.3 V memory modules. Buffered memory modules are not supported. ! SDRAM memory modules must meet the PC133 specification. Installing a memory module 2 2 Ê Push the holders on each side of the memory compartment outwards. Ê Insert the memory module into the location (1). Ê At
Summary of the content on the page No. 19
Add-on modules Installing network board with WOL Ê Install the network board as described in the operating manual for your unit. Ê Push the WOL cable onto the WOL plug connector of the system board. To use the WOL functionality of a network board the power supply must provide a 5 V auxiliary voltage of at least 1 A. If the system board was not already i incorporated in a device when you bought it you must check whether your power supply can provide the auxiliary voltage. You may find further inf
Summary of the content on the page No. 20
Add-on modules Replacing the lithium battery Incorrect replacement of the lithium battery may lead to a risk of explosion. ! The lithium battery must be replaced with an identical battery or a battery type recommended by the manufacturer (CR2032). Do not throw lithium batteries into the household waste. They must be disposed of in accordance with local regulations concerning special waste. Ensure that you insert the battery the right way round. The plus pole must be on the top! The following gra
