Summary of the content on the page No. 2
Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with ap- propriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of non- f
Summary of the content on the page No. 3
M3028BT-EPB User’s Manual Preface Preface The M3028BT-EPB is an emulation probe for M16C/Tiny Series MCUs. The M3028BT-EPB is used by connecting to the PC7501 emulator main unit. This user's manual mainly describes specifications of the M3028BT-EPB emulation probe and how to setup it. For details on the following products, which are used with the M3028BT-EPB, refer to each product's user's manual. All the components of this product are shown in "1.1 Package Components" (page 13). If th
Summary of the content on the page No. 4
M3028BT-EPB User’s Manual Important Important Before using this product, be sure to read this user’s manual carefully. Keep this user’s manual, and refer to this when you have questions about this product. Emulator: The emulator in this document refers to the following products that are manufactured by Renesas Technology Corp.: (1) PC7501 main unit (2) Emulation probe (3) Package converter board for connecting the user system The emulator herein does not include the customer’s use
Summary of the content on the page No. 5
M3028BT-EPB User’s Manual Important Usage restrictions: This emulator has been developed as a means of supporting system development by users. Therefore, do not use it as a device used for equipment-embedded applications. Also, do not use it for developing the systems or equipment used for the following purposes either: (1) Transportation and vehicular (2) Medical (equipment where human life is concerned) (3) Aerospace (4) Nuclear power control (5) Undersea repeater If you are consid
Summary of the content on the page No. 6
M3028BT-EPB User’s Manual Precautions for Safety Precautions for Safety Definitions of Signal Words In both the user’s manual and on the product itself, several icons are used to insure proper handling of this product and also to prevent injuries to you or other persons, or damage to your properties. This chapter describes the precautions which should be taken in order to use this product safely and properly. Be sure to read this chapter before using this product. This symbol repr
Summary of the content on the page No. 7
M3028BT-EPB User’s Manual Precautions for Safety WARNING Warnings for AC Power Supply: If the attached AC power cable does not fit the receptacle, do not alter the AC power cable and do not plug it forcibly. Failure to comply may cause electric shock and/or fire. Use an AC power cable which complies with the safety standard of the country. Do not touch the plug of the AC power cable when your hands are wet. This may cause electric shock. This product is connected signal gro
Summary of the content on the page No. 8
M3028BT-EPB User’s Manual Precautions for Safety CAUTION Cautions to Be Taken for Turning On the Power: Turn ON the power of the emulator and user system as simultaneously as possible. Turn OFF the power of the emulator and user system as simultaneously as possible. Do not leave either the emulator or user system powered on, because of leakage current the internal circuits may be damaged. When turning ON the power again after shutting OFF the power, wait about 10 seconds. C
Summary of the content on the page No. 9
M3028BT-EPB User’s Manual Contents Contents Page Preface..........................................................................................................................................................................3 Important.......................................................................................................................................................................4 Precautions for Safety ..............................................................
Summary of the content on the page No. 10
M3028BT-EPB User’s Manual Contents Page 4. Hardware Specifications.........................................................................................................................................65 4.1 Target MCU Specifications............................................................................................................................65 4.2 Differences between the Actual MCU and Emulator.............................................................................
Summary of the content on the page No. 11
M3028BT-EPB User’s Manual User Registration User Registration When you have purchased the emulator presented in this user's manual, please be sure to register it. As the H/W Tool Customer Registration Sheet is included with this manual, fill it in and FAX it to your local distributor or email the same contents to the following address. If you register it by email, you can use a text format for user registration created when installing the software in the following folder. Your registere
Summary of the content on the page No. 12
M3028BT-EPB User’s Manual Terminology Terminology Some specific words used in this user's manual are defined as follows: Emulator system This means an emulator system built around the PC7501 emulator. The PC7501 emulator system is configured with an emulator main unit, emulation probe, host machine and integrated development environment High-performance Embedded Workshop. Emulator main unit (Hereafter PC7501) This means an emulator main unit for M16C Family MCUs. Emulation probe
Summary of the content on the page No. 13
M3028BT-EPB User’s Manual 1. Outline 1. Outline This chapter describes the package components, the system configuration and the preparation for using this product for the first time. 1.1 Package Components The M3028BT-EPB package consists of the following items. When unpacking it, check to see if your M3028BT-EPB contains all of these items. Table 1.1 Package components Item Quantity M3028BT-EPB emulation probe 1 OSC-3 (20MHz) oscillator circuit board 1 OSC-2 oscillator circui
Summary of the content on the page No. 14
M3028BT-EPB User’s Manual 1. Outline 1.2 Other Tool Products Required for Development To bring forward programs development on the M16C/Tiny Series MCUs, the products listed below are necessary in addition to those contained package above. Get them separately. Table 1.2 Other tool products required for development Product Product name Notes Emulator main unit PC7501 - Emulator debugger M16C R8C PC7501 Emulator Debugger V1.01 Release 00 or later M3T-PD30F V2.20 Release1 or later 42
Summary of the content on the page No. 15
M3028BT-EPB User’s Manual 1. Outline 1.3 System Configuration 1.3.1 System Configuration Figure 1.1 shows a configuration of the M3028BT-EPB system. Host machine interface (1) Emulation probe (LPT parallel, USB or LAN) M3028BT-EPB (4) Host machine (3) Emulator main unit (2) Package converter board (5) User system PC7501 M30290T-80FPD etc. Figure 1.1 System configuration (1) Emulation probe M3028BT-EPB (this product) This emulation probe consists of the interface board PCA
Summary of the content on the page No. 16
M3028BT-EPB User’s Manual 1. Outline 1.3.2 Names and Functions of the PC7501 Upper Panel LEDs Figure 1.2 shows the names of the LEDs on the upper panel of the emulator. Figure 1.2 Names of the LEDs on the upper panel of the PC7501 (1) System Status LEDs The system status LEDs indicate the emulator PC7501's power supply, firmware operating status, etc. Table 1.3 lists the definition of each system status LED. Table 1.3 Definitions of the system status LEDs Name Status Mean
Summary of the content on the page No. 17
M3028BT-EPB User’s Manual 1. Outline (2) Target Status LEDs The target status LEDs indicate the target MCU's operating status and target board's power supply. Table 1.4 lists the definition of each target status LED. Table 1.4 Definitions of the target status LEDs Name Status Meaning POWER ON Power is supplied to the user system. OFF Power is not supplied to the user system. CLOCK ON Target MCU clock is oscillating. OFF Target MCU clock is not oscillating. RESET ON Target MCU is be
Summary of the content on the page No. 18
M3028BT-EPB User’s Manual 1. Outline 1.4 Specifications Tables 1.5 lists the specifications of the M3028BT-EPB. Table 1.5 M3028BT-EPB specifications (1/2) Emulator PC7501 Applicable MCU M16C/Tiny Series MCUs Evaluation MCU M30290FCWP ROM: 128KB + 4KB, RAM: 12KB Usable MCU mode Single-chip mode Max. ROM/RAM capacity (1) Internal flash ROM: 128KB + 4KB 0F000h--0FFFFh, E0000h--FFFFFh, for the maximum operating frequency, refer to *1. (2) Internal RAM: 12KB 00400h--033FFh, for the
Summary of the content on the page No. 19
M3028BT-EPB User’s Manual 1. Outline 1.5 Operating Environment Be sure to use this emulator with the operating environmental of the emulator and host machine listed in Tables 1.6 and 1.7. Table 1.6 Operating environmental conditions Item Description Operating temperature 5 to 35°C (no dew) Storage temperature -10 to 60°C (no dew) Table 1.7 Operating environment of the host machine Item Description Host machine IBM PC/AT compatibles OS Windows 98SE * Windows Me Windows XP W
Summary of the content on the page No. 20
M3028BT-EPB User’s Manual 2. Setup 2. Setup This chapter describes the preparation for using this product, the procedure for starting up the emulator and how to change settings. 2.1 Flowchart of Starting Up the Emulator The procedure for starting up the emulator is shown in Figure 2.1. For details, refer to each section hereafter. And, when the emulator does not start up normally, refer to “5. Troubleshooting” (page 78). Check the package components. Refer to “1.1 Package
Summary of the content on the page No. 1
REJ10J1459-0200(T)
M3028BT-EPB
User's Manual
Emulation Probe for M16C/Tiny Series
Rev.2.00
Sep. 16, 2006
