Transcend Information CompactFlash TS512MCF100I-P user manual

User manual for the device Transcend Information CompactFlash TS512MCF100I-P

Device: Transcend Information CompactFlash TS512MCF100I-P
Category: Computer Hardware
Manufacturer: Transcend Information
Size: 3.49 MB
Added : 11/16/2014
Number of pages: 80
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Transcend Information CompactFlash TS512MCF100I-P. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Transcend Information CompactFlash TS512MCF100I-P.

For your convenience

If looking through the Transcend Information CompactFlash TS512MCF100I-P user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Transcend Information CompactFlash TS512MCF100I-P on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Transcend Information CompactFlash TS512MCF100I-P to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Transcend Information CompactFlash TS512MCF100I-P User manual - Online PDF
Advertisement
« Page 1 of 80 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Transcend Information CompactFlash TS512MCF100I-P but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Transcend Information CompactFlash TS512MCF100I-P. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1


Transcend Industrial CF Card
Transcend Industrial CF Card
Transcend Industrial CF Card
( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) )
(TS128M ~ 16GCF100I)



Description Features

The Transcend CF100I is a High Speed industrial CompactFlash Specification Version 4.1 Complaint
Compact Flash Card with high quality Flash Memory • RoHS compliant products
• Single Power Supply: 3.3V ± 5% or 5V ± 10%
assembled on a printed circuit board.
o o

Summary of the content on the page No. 2

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I) Order information Part Number Interface Transfer Mode Ultra DMA mode 0~4 True IDE mode Multi-Word DMA Mode 0~4 Fixed Disk (Standard) TS128M~16GCF100I PIO Mode 0 ~ 6 PC Card mode (PCMCIA) 80ns, 100ns, 120ns, 250ns Fixed Disk (Standard) True IDE mode PIO Mode 0 ~ 4 Fixed Disk (Standard)

Summary of the content on the page No. 3

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I) Transcend Transcend Information Inc. 3 V1.1

Summary of the content on the page No. 4

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I) Block Diagram Transcend Information Inc. 4 V1.1

Summary of the content on the page No. 5

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I) Pin Assignments and Pin Type Transcend Information Inc. 5 V1.1

Summary of the content on the page No. 6

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I) Note: 1) These signals are required only for 16 bit accesses and not required when installed in 8 bit systems. Devices should allow for 3-state signals not to consume current. 2) The signal should be grounded by the host. 3) The signal should be tied to VCC by

Summary of the content on the page No. 7

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I) Signal Description Signal Name Dir. Pin Description A10 – A00 I 8,10,11,12, These address lines along with the -REG signal are used to select the following: (PC Card Memory Mode) 14,15,16,17, The I/O port address registers within the CompactFlash Storage Card , the 18,19,20 memory mapped

Summary of the content on the page No. 8

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I) Signal Name Dir. Pin Description These input signals are used both to select the card and to indicate to the card -CE1, -CE2 I 7,32 whether a byte or a word operation is being performed. -CE2 always accesses (PC Card Memory Mode) the odd byte of the word.-CE1 accesses the even byte or the O

Summary of the content on the page No. 9

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I) Signal Name Dir. Pin Description -INPACK O 43 This signal is not used in this mode. (PC Card Memory Mode) The Input Acknowledge signal is asserted by the CompactFlash Storage Card -INPACK (PC Card I/O Mode) when the card is selected and responding to an I/O read cycle at the address

Summary of the content on the page No. 10

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I) Signal Name Dir. Pin Description -IOWR This signal is not used in this mode. I 35 (PC Card Memory Mode) -IOWR The I/O Write strobe pulse is used to clock I/O data on the Card Data bus into (PC Card I/O Mode) the CompactFlash Storage Card controller registers when the CompactFlash Stor

Summary of the content on the page No. 11

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I) Signal Name Dir. Pin Description -REG This signal is used during Memory Cycles to distinguish between Common I 44 (PC Card Memory Mode) Memory and Register (Attribute) Memory accesses. High for Common Memory, Attribute Memory Select Low for Attribute Memory. -REG The signal shall also

Summary of the content on the page No. 12

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I) Signal Name Dir. Pin Description -VS1 O 33 Voltage Sense Signals. -VS1 is grounded on the Card and sensed by the Host -VS2 40 so that the CompactFlash Storage Card CIS can be read at 3.3 volts and -VS2 is (PC Card Memory Mode) reserved by PCMCIA for a secondary voltage and is not connected

Summary of the content on the page No. 13

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I) WP Memory Mode – The CompactFlash Storage Card does not have a write protect O 24 (PC Card Memory Mode) switch. This signal is held low after the completion of the reset initialization Write Protect sequence. -IOIS16 I/O Operation – When the CompactFlash Storage Card is configured for

Summary of the content on the page No. 14

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I) Supply Voltage V 4.5 5.5 V CC High level output voltage V V -0.8 V OH CC Low level output voltage V 0.8 V OL 4.0 V Non-schmitt trigger High level input voltage V IH 1 2.92 V Schmitt trigger 0.8 V Non-schmitt trigger Low level input voltage V IL 1 1.70 V Schmitt trigger 2 Pull u

Summary of the content on the page No. 15

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I)  Output Drive Type  Output Drive Characteristics  Transcend Information Inc. 15 V1.1

Summary of the content on the page No. 16

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I)  Signal Interface Transcend Information Inc. 16 V1.1

Summary of the content on the page No. 17

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I) Notes: 1) Control Signals: each card shall present a load to the socket no larger than 50 pF 10 at a DC current of 700 μ A low state and 150 μ A high state, including pull-resistor. The socket shall be able to drive at least the following load 10 while meeting all AC timing requirements: (th

Summary of the content on the page No. 18

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I)  Ultra DMA Electrical Requirements  Host and Card signal capacitance limits for Ultra DMA operation The host interface signal capacitance at the host connector shall be a maximum of 25 pF for each signal as measured at 1 MHz. The card interface signal capacitance at the card connector sha

Summary of the content on the page No. 19

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I) Table: Ultra DMA Termination with Pull-up or Pull down Example  Printed Circuit Board (PCB) Trace Requirements for Ultra DMA On any PCB for a host or device supporting Ultra DMA:  The longest D[15:00] trace shall be no more than 0.5" longer than either

Summary of the content on the page No. 20

Transcend Industrial CF Card Transcend Industrial CF Card Transcend Industrial CF Card ( (T TS S1 12 28 8M M ~ ~ 1 16 6G GC CF F1 10 00 0II) ) (TS128M ~ 16GCF100I)  Attribute Memory Read Timing Specification Transcend Information Inc. 20 V1.1


Alternative user manuals
# User manual Category Download
1 Transcend Information CompactFlash TS1G-32GCF133 User manual Computer Hardware 0
2 Transcend Information CompactFlash CF100I User manual Computer Hardware 1
3 Transcend Information CompactFlash TS8GCF133 User manual Computer Hardware 1
4 Transcend Information CompactFlash CF 300X User manual Computer Hardware 2
5 Transcend Information CompactFlash TS1GCF133 User manual Computer Hardware 1
6 Transcend Information CompactFlash CF 133X User manual Computer Hardware 1
7 Transcend Information CompactFlash TS32GCF133 User manual Computer Hardware 0
8 Transcend Information CompactFlash TS2GCF133 User manual Computer Hardware 0
9 Transcend Information CompactFlash TS16GCF100I-P User manual Computer Hardware 0
10 Transcend Information CompactFlash TS128MCF100I-P User manual Computer Hardware 1
11 Transcend Information CompactFlash TS2GCF100I-P User manual Computer Hardware 0
12 Transcend Information CompactFlash TS4GCF100I-P User manual Computer Hardware 1
13 Transcend Information CompactFlash TS256MCF100I-P User manual Computer Hardware 2
14 Transcend Information CompactFlash TS1GCF100I-P User manual Computer Hardware 0
15 Transcend Information CompactFlash TS2G-16GCF300 User manual Computer Hardware 0
16 Sony MSAKIT-PC4A User manual Computer Hardware 2
17 Sony MRW62E-S1 2694866142 User manual Computer Hardware 5
18 Philips MATCH LINE 9596 User manual Computer Hardware 17
19 Sony 64GB SDHC Class 10 Memory Card Readers SF32UY User manual Computer Hardware 1
20 Philips PSC702 User manual Computer Hardware 1