Summary of the content on the page No. 1
User’s Manual
CNPS7700 Series
Intel Socket 1155/1156/775 CPUs
Core i7
Core i5
Core i3
Core 2 Quad
Core 2 Duo
Pentium Dual Core
Pentium D
Pentium 4
Celeron D
AMD Socket 754/939/940 CPUs
Athlon 64
Athlon 64 X2
Athlon 64 FX
Opteron
Dual-Core Opteron
Sempron
To ensure safe and easy installation,
please read the following precautions.
www.ZALMAN.com
V 2.1
Summary of the content on the page No. 2
1. Precautions 1) Use and keep product away from reach of children and pets. 2) Do not ingest the Thermal Grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or irritation persists, seek medical attention. 3) To prevent possible injuries, gloves must be worn while handling this product. 4) Excessive force exerted on the fan may cause damage to the fan and/ or system. 5) Avoid inserting objects or hands into the fan while it is in
Summary of the content on the page No. 3
3. Components 1) Common Components Cooler Thermal Grease User’s Manual Fan Mate 2 Fan Mate 2 Cable Double-Sided Tape 2) Intel Components Socket 1155 / 1156 / 775 S-Type Grips Clip Support Fixing Bolts Clip Support Nuts Washers 3) AMD Components Socket 754 / 939 / 940 L-Type Grips AMD Backplate Backplate Fixing Bolts Washer Plate 2 .COM
Summary of the content on the page No. 4
4. Installation Requirements 1) Space Requirements The cooler’s installation requires unobstructed space with dimensions of 136(width), 136( height), 70( depth), and the CPU as a central reference point. Please check if components such as ODDs and PSU protrude into the required space. 136 70 136 2) Compatible CPUs Intel Socket 1 155 / 1156 / 775 CPUs Core i7 / i5 / i3 Core 2 Quad Core 2 Duo all clock speeds all clock speeds all clock speeds Pentium 4 Celeron D Prescott Cedar Mill up to 540 u
Summary of the content on the page No. 5
5. Installation 1) Intel Socket 1155 / 1156 / 775 Installation Install the Clip Support to the motherboard according to the socket-type. Bolt(silver) Clip Support Socket 1155 / 1156 Socket 775 Washer Nut Caution Lever Slot Please make note of the Lever Slot’s direction when installing the Clip Support. Clear off any particles or residue from the CPU’s surface then spread a thorough layer of Thermal Grease on the CPU and the base of the cooler. 4 .COM M/B
Summary of the content on the page No. 6
Install the S-Type Grips to both sides of the Clip and fasten Bolts through the holes of the Grips onto the Clip Support. 2) AMD Sockets 754 / 939 / 940 Installation Install the AMD Backplate to the motherboard using Washers and Backplate Fixing Bolts. Backplate Fixing Bolt Washer AMD Backplate Clear off any particles or residue from the CPU’s surface then spread a thorough layer of Thermal Grease on the CPU and the base of the cooler. 5 .COM M/B
Summary of the content on the page No. 7
Install the L-Type Grip to both sides of the Clip and fasten Bolts through the holes of the Grips onto the Clip Support. 6. Fan Mate 2 Installation and Usage 1) Fan Mate 2 Installation Connect Fan Mate 2 between the Fan Mate 2 can be installed to the Fan Cable and the motherboard side of the case using Double-Sided as shown in the diagram below. Tape. Double-Sided Tape Fan Connector (Cooler) 2) Fan Mate 2 Operation Fan Speed Control Knob Adjust the Fan Speed Control Knob for RPM cont
Summary of the content on the page No. 8
GS1000 / GS1000SE • E-ATX / Standard ATX / microATX Compatible * Supports Intel Dual Xeon server motherboards • UP to 6 Hot Swap HDD Bays * GS1000(3 Standard / 3 Optional) * GS1000 SE(Optional) • Tool-Free HDD Installation • Airflow Optimized Design • Vibration Absorbing HDD Dampers and Feet • The World’s First Roller Rails for Smooth & Easy PSU Installation • Cable Compartment Behind the Motherboard for Cable Management • Dedicated Fan Compartment for Fanless PSU Users • Up to a
