Summary of the content on the page No. 1
SyncMaster 960BG
Install drivers Install programs
Summary of the content on the page No. 2
Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode.
Summary of the content on the page No. 3
Do not use a damaged or loose plug. This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plug and wire nor pla
Summary of the content on the page No. 4
Do not drop the monitor when moving it. This may cause damage to the product or human body. Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf. Dropping the product may cause damage to the product or personal injury. Do not place the product on an unstable or small surface area. Place the product on an even, stable surface, as the product may fall and cause harm to someone walking by, specifically chi
Summary of the content on the page No. 5
Do not place the monitor face down. The TFT-LCD surface may be damaged. Installing a wall bracket must be done by a qualified professional. Installation by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10 cm/4 inch ) for ventilation purposes. Poor ventilation may cause an increase in the internal temperature of the product, result
Summary of the content on the page No. 6
Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. Contact the Service Center or Customer Center for interior cleaning once a year. Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause malfunction or fire. Others Do not remove cover (or b
Summary of the content on the page No. 7
Do not try to move the monitor by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or fire due to damage to the cable. Do not move the monitor right or left by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or fire due to damage to the cable. Do not cover the vents on the monitor cabinet. Bad ventilation may cause a breakdown or fire. Do not place water containers, chemical products or sma
Summary of the content on the page No. 8
Adjust the resolution and frequency to the levels appropriate for the model. Inappropriate resolution may cause undesirable picture quality. 19 inch (48 cm) - 1280 X 1024 Be careful that adapter should not be in contact with water and therefore not be wet. This may cause malfunction, an electric shock or fire. Do not use adapter by the waterside or outside particularly when it rains or snows. Be careful that adapter should not be wet while cleaning floor with water.
Summary of the content on the page No. 9
Do not install the product on an unstable, uneven surface or a location prone to vibrations. Dropping the product may cause damage to the product or personal injury. Using the product in a location prone to vibrations may shorten the lifetime of the product or may catch fire. When moving the monitor, turn off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connected to other devices, are disconnected before moving the monitor. Failur
Summary of the content on the page No. 10
List of Features RTA Monitor RTA(Response Time Accelerator) A function that accelerates the response speed of the panel so as to provide a sharper and more natural video display. Magic Contrast: Supports a contrast of up to 700:1 for deeper color tones. Magic Speed: Offers a clear image with no afterimages by supporting a fast response rate of 4ms. Magic Stand: Allows users to adjust the height of the monitor for user convenience. When changing the monitor angle to yo
Summary of the content on the page No. 11
Manual User's Guide, Warranty Card Monitor Driver, Quick Setup Guide (Not available in all Natural Color software, locations) MagicTune™ software, MagicRotation software Cable 'DVI-A to D-Sub' Cable Power Cord DC-Adapter Sold separately DVI Cable Front Power indicator / The blue light is on in its normal working condition and blinks when setting
Summary of the content on the page No. 12
the adjustments of the monitor. Power button [ ] Use this button for power the monitor on and off, change the input source, or perform Auto Adjustment. Power On/Off : When you press the power button, the monitor is on/off. >>Click here to see an animation clip Input Source : When you press the power button, the input source may be changed to Analog or Digital, blinking once with blue lihgt. >>Click here to see an animation clip Auto adjustment : When you press the power button,
Summary of the content on the page No. 13
DVI-I Connect the 'DVI-A to D-Sub' Cable to the DVI port on the back of your monitor. See Connecting the Monitor for further information regarding cable connections.
Summary of the content on the page No. 14
Connecting the Monitor 1. Connect the DC 14V adapter for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-Sub (analog) connector on the video card. Connect the 'DVI-A to D-Sub' Cable to the DVI-I port on the back of your monitor. 2-2. Connected to a Macintosh. Connect the monitor to the Macintosh computer using the 'DVI-A to D-Sub' connection cable. 2-3. In the case of an old model Macintosh, you
Summary of the content on the page No. 15
Using the Stand Pivot Stand Even when the monitor is completely folded, the monitor screen is still approximately 2 cm (0.8 inch) off the floor. Do not press the monitor screen further against the floor. This monitor cannot be installed with a supporting device (arm-support, wall bracket or other) other than the one provided. (When pivoting the monitor, rotation angle is displayed on screen of the monitor.) 0° 90° When pivoting the monitor, the corner of the monitor may reach
Summary of the content on the page No. 16
backward more than 45 degrees and then pivot it. Failure to do so may damage the monitor. Installing the Monitor Driver (Automatic) When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. I
Summary of the content on the page No. 17
4. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certified MS logo,and this installation doesn't damage your system.The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/. 5. Monitor driver installation is completed. Installing the Monitor Driver (Manual) Windows XP | Windows 2000 |Windows Me |Windows NT | Linux When prompted by the operating s
Summary of the content on the page No. 18
3. Click "Display" icon and choose the "Settings" tab then click "Advanced..". 4. Click the " " button on the " " tab and select " " tab. Properties Monitor Driver 5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button. 6. Select "Don't search ,I will.." then click "Next" and then click "Have disk".
Summary of the content on the page No. 19
7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certified MS logo,and this installation doesn't damage your system.The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the "Close" button then click "O
Summary of the content on the page No. 20
10. Monitor driver installation is completed. ® ® Microsoft Windows 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose "OK" button on the "Insert disk" window. 2. Click the "Browse" button on the "File Needed" window. 3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button. How to install 1. Click "Start" , "Setting" , "Control Panel". 2. Double click the "Display" Icon. 3. C
