Summary of the content on the page No. 1
Dell™ U3011 Flat Panel Monitor User's Guide
About Your Monitor
Setting Up the Monitor
Operating the Monitor
Troubleshooting
Appendix
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Information
Summary of the content on the page No. 2
Back to Contents Page About Your Monitor Dell™ U3011 Flat Panel Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Universal Serial Bus (USB) Interface Plug and Play Capability Card Reader Specifications LCD Monitor Quality and Pixel Policy Maintenance Guidelines Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing. NOTE:
Summary of the content on the page No. 3
l Color calibration datasheet l Product and Safety Information Guide Product Features The U3011 flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 756.23 mm (30 inches) viewable area display (measured diagonally). ■ 2560 x 1600 resolution, plus full-screen support for lower resolutions. ■ Wide viewing angle (178°/178°) and superb grayscale tracking minimizes color deviations at biased angles of viewing
Summary of the content on the page No. 4
3 Shortcut Key 3 - Input Source (Default) 4 Menu 5 Exit 6 Power (with power light indicator) NOTE: 1~5 are capacitive touch sensor keys, which are activated by placing your finger on the blue LED. Back View Back view Back view with monitor stand Label Description Use VESA mounting holes (100 mm x 100 Wall mount monitor using VESA-compatible wall mount 1 mm - behind attached VESA Plate) kit (100 mm x 100 mm). 2 Security lock slot To help secure your monitor. 3 Barcode serial number label To c
Summary of the content on the page No. 5
Bottom View Bottom view Bottom view with monitor stand Label Description Use 1 AC power cord connector Connect the power cable. 2 DC power connector for Dell Soundbar Connect the power cord for the soundbar (optional). Connect the HDMI 2.0 channel or DisplayPort 2.0 channel or 5.1 channel audio output devices. Connect the front left/right channel output to the green connector. Use this connector for 2.0/2.1 channel audio connection. 3 Audio connectors Connect the rear left/right c
Summary of the content on the page No. 6
Color depth 1.07 billion colors Color Gamut 117%* NTSC typical / 100% sRGB, 99% Adobe RGB *U3011 color gamut (typical) is based on CIE1976 (117%) and CIE1931 (102%) test standards. Resolution Specifications Analog signal input Horizontal scan range 30 kHz to 99 kHz Vertical scan range 56 Hz to 86 Hz Optimal preset resolution 2048 x 1280 at 60 Hz Highest preset resolution 2048 x 1280 at 60 Hz Digital signal Input (DVI dual link and DisplayPort and HDMI) Horizontal scan range 30 kHz to 112
Summary of the content on the page No. 7
sync(H+V) 0.3 volt, 75 ohm input impedance Separate horizontal and vertical synchronizations, Synchronization input signals polarity-free TTL level, SOG (Composite SYNC on green) 100 to 240 VAC / 50 Hz/60 Hz +/- 3 Hz / 2.5 A AC input voltage/frequency/current (Max.) o 120 V: 42 A (Max.) at 0 C Inrush current o 220 V: 80 A (Max.) at 0 C Physical Characteristics 15-pin D-subminiature, blue connector; DVI-D, Connector type white connector; HDMI/DisplayPort, black connector; Component DVI
Summary of the content on the page No. 8
Operating 3,657.6 m (12,000 ft) max Non-operating 12,192 m (40,000 ft) max 853.6 BTU/hour (maximum) Thermal dissipation 375.59 BTU/hour (typical) Power Management Modes If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as Power Save Mode*. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The f
Summary of the content on the page No. 9
12 DDC-SDA 13 H-sync 14 V-sync 15 DDC-SCL DVI Connector NOTE: Pin 1 is at the top left. Pin Number 24-pin Side of the Connected Signal Cable 1 T.M.D.S. Data 2- 2 T.M.D.S. Data 2+ 3 T.M.D.S. Data 2/4 Shield 4 T.M.D.S. Data 4- 5 NT.M.D.S. Data 4+ 6 DDC Clock 7 DDC Data 8 No Connect 9 T.M.D.S. Data 1- 10 T.M.D.S. Data 1+ 11 T.M.D.S. Data 1/3 Shield 12 T.M.D.S. Data 3- 13 T.M.D.S. Data 3+ 14 +5V Power 15 Self Test 16 Hot Plug Detect 17 T.M.D.S. Data 0- 18 T.M.D.S. Data 0+ 19 T.M.D.S. Data 0/5 S
Summary of the content on the page No. 10
5 GND 6 ML1(n) 7 ML2(p) 8 GND 9 ML2(n) 10 ML3(p) 11 GND 12 ML3(n) 13 GND 14 GND 15 AUX(p) 16 GND 17 AUX(n) 18 HPD 19 DP_PWR Return 20 +3.3V DP_PWR 19-pin HDMI Connector Pin Number 19-pin Side of the Connected Signal Cable (Cable not included) 1 TMDS DATA 2+ 2 TMDS DATA 2 SHIELD 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1 SHIELD 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0 SHIELD 9 TMDS DATA 0- 10 TMDS CLOCK 11 TMDS CLOCK SHIELD 12 TMDS CLOCK- 13 Floating 14 Floating 15 DDC CLOCK (S
Summary of the content on the page No. 11
Pin Number 3-pin Side of the Connected Signal Cable (Cable not included) 1 Y (Luminance signal) 2 Pb (Color differential signal) 3 Pr (Color differential signal) Universal Serial Bus (USB) Interface NOTE: This monitor supports High-Speed Certified USB 2.0 interface. Transfer speed Data Rate Power Consumption High speed 480 Mbps 2.5 W (Max., each port) Full speed 12 Mbps 2.5 W (Max., each port) Low speed 1.5 Mbps 2.5 W (Max., each port) USB Upstream Connector Pin Number 4-pin Side of
Summary of the content on the page No. 12
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see Operating the Monitor. Card Reader Specifications Overview l The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card. l The
Summary of the content on the page No. 13
WARNING: Read and follow the safety instructions before cleaning the monitor. WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor: l To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinn
Summary of the content on the page No. 14
Back to Contents Page Appendix Dell™ U3011 Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Product Information Guide. FCC Notices (U.S. Only)
Summary of the content on the page No. 15
Back to Contents Page Setting Up Your Monitor Dell™ U3011 Flat Panel Monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 2048 x 1280 (VGA input source) / 2560 x 1600 (DVI/DisplayPort input sources) / 1920 x 1200 (HDMI input source) again. NOTE: If yo
Summary of the content on the page No. 16
Back to Contents Page Setting Up Your Monitor Dell™ U3011 Flat Panel Monitor If you have a non Dell™ desktop, portable computer, or graphics card In Windows XP: 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3. Select Advanced. 4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 5. Refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR h
Summary of the content on the page No. 17
Back to Contents Page Operating the Monitor Dell™ U3011 Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On-Screen Display (OSD) Menu Setting the Maximum Resolution Using the Dell Soundbar (Optional) Using the Tilt, Swivel, and Vertical Extension Using the Front Panel Controls Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD sho
Summary of the content on the page No. 18
5 Exit the On-Screen Display menu. Exit 6 Use the Power button to turn the monitor on and off. The blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode. Power (with power light indicator) Using the On-Screen Display (OSD) Menu Accessing the Menu System NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also save
Summary of the content on the page No. 19
Brightness/Contrast Use this menu to activate Brightness/Contrast adjustment. Brightness Brightness adjusts the luminance of the backlight. Touch the button to increase brightness and touch the button to decrease brightness (min 0 ~ max 100). Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary. Touch the button to increase contrast and touch the button to decrease contrast (min 0 ~ max 100). The Contrast function adjusts the d
Summary of the content on the page No. 20
HDMI Select HDMI input when you are using the HDMI connector. Touch the button to select the HDMI input source. Component Select Component input when you are using the Component connector. Touch the button to select the Component input source. Color Settings Use the Color Settings to adjust the color setting mode and color temperature. Color Settings submenu for Standard, Warm, Cool, Adobe RGB, sRGB, xv Mode and Custom Color modes: Color Settings submenu for Multimedia, Game and Mo
