Summary of the content on the page No. 1
D1960 Wide LCD Monitor
User’s Guide
Summary of the content on the page No. 2
TABLE OF CONTENTS ABOUT THIS GUIDE------------------------------------------------------------------------1 NATIONAL CONVENTIONS---------------------------------------------------------------1 FCC NOTICE --------------------------------------------------------------------------------- 2 PRECAUTIONS ------------------------------------------------------------------------------- 3 SETUP THE STAND AND BASE ------------------------------------------------------- 4 ADJUSTING VIEWING ANGLE -----------
Summary of the content on the page No. 3
About This Guide This guide describes the monitor’s features, setup, and operation. lnformation in this document is subject to change without notice. The sections are as follows: • Safety Instructions: lists safety information. • Setup: describes the initial setup process. • Using the Monitor: gives an overview of how to use the monitor. • Technical Support : provides tips and solutions for common problems. • Product Information: lists the technical specifications of the monitor.
Summary of the content on the page No. 4
FCC Notice FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction
Summary of the content on the page No. 5
Precautions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards Read and follow these precautions when connecting and using your computer monitor: PRECAUTIONS • Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. • Do not place the monitor on an unstable cart, stand, or table. If the
Summary of the content on the page No. 6
Setup the stand and base Please setup or remove the base following below steps. Adjusting Viewing Angle • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You are able to adjust the monitor’s angle from -5°to 20 °. NOTE: Do not touch the LCD screen when you change the angle. It may cause damage o
Summary of the content on the page No. 7
Attaching the Cables Cable Connections On Back of Monitor and Computer 1. Power Cord 2. Audio Cable 3. DVI Cable 4. Analog Cable Turn off your computer before performing the procedure below. 1. Connect the power cable to the AC port on the back of the monitor. 2. Conn
Summary of the content on the page No. 8
Wall Mounting Preparing to Install An Optional Wall Mounting Arm This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure. Follow these steps: 1. Remove the base. 2. Follow the manufacturer’s instructions to assemble the wall mounting arm. 3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the monitor. 4. Insert the 4 screws into the holes and tighten. 5.
Summary of the content on the page No. 9
Setting the Optimal Resolution The recommended resolution for this monitor is 1366 by 768. To setup the monitor to this resolution, follow the steps below. 1. Click START. 2. Click SETTINGS. 3. Click CONTROL PANEL. 4. Double click DISPLAY. 5. Click SETTINGS. 6. Set the resolution SLIDE-BAR to 1366 by 768. External Controls Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor (See Figure ). By changing these sett
Summary of the content on the page No. 10
OSD Settings • Press the MENU-button to activate the OSD window. • Press+ or - to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it. If the function selected has a sub-menu, press or again to navigate through the sub-menu functions. Once the desired function is highlighted, press MENU-button to activate it. • Press+ or - to change the settings of the selected function. To exit and save, select the exit fu
Summary of the content on the page No. 11
DCB Adjustment What is DCB? Dynamic Color Boost (DCB) is an advanced color adjustment technology. Through analyzing RGB signals, DCB creates more vivid and natural images to suit various color environment needs. DCB has two types of color enhancers: “Color Boost” and “Picture Boost” . DCC: Dynamic color control ICM: Intelligent color management
Summary of the content on the page No. 12
) How to use Color Boost? Five color-enhancement settings: To accommodate various display needs, Color Boost also offers 5 different color enhancement modes: Full Enhance, Natural Skin, Green Field, Sky Blue, and Auto-Detect. Please go to the fourth icon labeled “Color Boost” in the OSD menu and select one of the five settings you desire to be turned on. Full Enhance: When “Full Enhance” is turned on, the color saturation of the entire screen is fully enriched, thus all colors becom
Summary of the content on the page No. 13
Nature Skin: When “Natural Skin” is turned on, the red and yellow colors are enriched automatically, thus presents human skin with more natural and truer colors. “Natural Skin” setting is ideal for viewing human portrait and detailed skin texture. Green Field: When “Green Field” is turned on, the green color is enriched so that football field and mountain landscape would look more natural and fresh. “Green Field” setting is ideal for watching mountain scenery and outdoor sports.
Summary of the content on the page No. 14
Sky Blue: When”Sky Blue” is turned on, the color blue is being fine-tuned so that the sky or ocean landscape will look more vivid and in-depth. “Sky Blue” setting is ideal for viewing sky and ocean images. Auto Detect: When “Auto Detect” is turned on, every pigment will be detected and self-adjusted to render a lively picture. Demo: Screen divided into two for demonstration purposes.
Summary of the content on the page No. 15
) How to use Picture Boost? Users can change the color settings of a self-selected zone on the screen. The size and position of the selected zone can also be adjusted. “Picture Boost” is located in the fifth icon labeled “Picture Boost” in the OSD menu. Turn on “Bright Frame” to select a zone on the screen to be enhanced. Please note when adjust or turn on any one of the DCB features, the rest of color settings including DCR will be disabled or return to default. Disclaimer: DCB aftereff
Summary of the content on the page No. 16
Image Adjustment Luminance Adjust Range Description Brightness 0-100 Backlight Adjustment Contrast 0-100 Constrast from Digital-register Standard Standard Mode Text Text Mode Internet Internet Mode Eco Game Game Mode Movie Movie Mode Esports Sports Mode Gamma1 Adjust Gamma1 Gamma Gamma2 Adjust Gamma2 Gamma3 Adjust Gamma3 Image Setup Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise Focus 0-100 Adjust Picture Phase to reduce Horizontal-Line noise H-Position 0-100 Adjust the ho
Summary of the content on the page No. 17
Notes: 1)If the product has only one signal input, the item of “Input Select” is disable to adjust. LED Indicators Status LED Color Full Power Mode Green or Blue Active-off Mode Orange or red 5
Summary of the content on the page No. 18
Problems and Solutions Problem and Questions Possible Solutions • Make sure the power button is ON and the Power Cord Power LED is Not ON is properly connect to a grounded power outlet and to the monitor • In order for the Plug & Play feature of the monitor to work, you need a Plug & Play compatible computer & video card. Check with your computer manufacturer. Also check the monitor’s video cable and make sure No Plug & Play none of the pins are bent • Make sure the Monitor’s D
Summary of the content on the page No. 19
Specifications Model Number D1960wA Driving system TFT Color LCD Viewable Image Size 470mm diagonal Pixel Pitch 0.3mm (H) x 0.3mm (V) LCD Panel R, G, B Analog Interface & Digital Vídeo Interface Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 85.5 MHz Horizontal scan range 30 kHz - 80 kHz Horizontal scan Size (Maximum) 409.8mm Vertical scan range 55 Hz - 75 Hz Vertical scan Size (Maximum) 230.4mm Optimal present resolution 1366 x 768 (60 Hz) Highest preset resolution 136
Summary of the content on the page No. 20
EPA ENERGY STAR ® ENERGY STAR® is a U.S registered mark. As an ENERGY STAR® Partner, our company has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Preset Display Modes HORIZONTAL VERTICAL STAND RESOLUTION FREQUENCY (kHZ) FREQUENCY (HZ) VGA 640 x 480 @60Hz 31.469 59.94 VGA 640 x 480 @67Hz 35 66.667 VGA 640 x 480 @72Hz 37.861 72.809 VGA 640 x 480 @75Hz 37.5 75 Dos-mode 720 x 400 @70Hz 31.469 70.087 Dos-mode 640 x 400 @70Hz 31.469 70.087 SVGA 800
