Summary of the content on the page No. 1
LT2223zwC Flat Panel Monitor
User's Guide
Summary of the content on the page No. 2
Product numbers First Edition(December 2012) © Copyright Lenovo 2012. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure. LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant a General Services Administratio
Summary of the content on the page No. 3
Contents Safety information........................................................................................iii Chapter 1. Getting started...........................................................................1-1 Shipping contents...................................................................................................................................1-1 Product overview.................................................................................................
Summary of the content on the page No. 4
Safety information General Safety guidelines For tips to help you use your computer safety, go to: http://www.lenovo.com/safety Before installing this product, read the Safety Information. íí í © Copyright Lenovo 2012. iii
Summary of the content on the page No. 5
Chapter 1.Getting started ® This User’s Guide contains detailed information on the ThinkVision Flat Panel Monitor. For a quick over view, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: · Information flyer · Reference and Driver CD · ThinkVision Flat Panel Monitor · Power Cord · Analog Signal Cable · USB Cable Note: To attach a VESA mount, please see “Detaching the monitor stand” o
Summary of the content on the page No. 6
30° Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. 0° Swivel With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle. o o -45 4 5 1-2 Flat Panel Monitor User’s Guide 5°
Summary of the content on the page No. 7
Height Adjustment Hold the monitor pull up on both sides, adjust the reasonable height of the monitor. 11 0 mm Monitor Pivot 90° - Adjust height to the top position before rotation the monitor. - Rotate clockwise until the monitor stops at 90°. User controls Your monitor has controls on the front which are used to adjust the display. For information on how to use these controls, please see “Adjusting your monitor image” on
Summary of the content on the page No. 8
Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower left corner). Please follow the instructions that came with the cable lock to attach it. Web-Camera Your monitor has embedded FHD Web-Camera Module, you can use it on living meeting and other net communication. Speaker Your monitor has embedded a pair of speaks with 3W, and it can support DP audio output and USB audio output. The USB cable need plug in wh
Summary of the content on the page No. 9
you can push side volume control key to adjust sound of speaker. Setting up your monitor This section provides information to help you set up your monitor. Connecting and turning on your monitor N ote:Be sure to read the Safety Information located in the information flyer before carrying out this procedure. 1.Power off your computer and all attached devices, and unplug the computer
Summary of the content on the page No. 10
Connect one end of the DP cable to the DP connector on the back of the computer, and the other end to the DP connector on the monitor. Connect one end of the USB hub cable to the USB connector on the back of the computer, and the other end to the upstream USB connector on the monitor. 1-6 Flat Panel Monitor Users Guide S S
Summary of the content on the page No. 11
Connect one end of the HDMI cable to the HDMI connector on the back of the computer, and the other end to the HDMI connector on the monitor. Plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord 2 according to IEC 60227 (des
Summary of the content on the page No. 12
Rotate the hea d of the monitor into portrait vie w. Open the Main Clip and place the cables through the Main Clip. 1-8 F l a t Pan el Mo nitor Us ers Guide
Summary of the content on the page No. 13
Power on the monitor and the computer. To install the monitor driver, insert the Reference and Driver CD, click Install driver, and follow the on-screen instructions. Registering your option Thank you for purchasing this Lenovo® product. Please take a few moments to register your product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing products and services that are important to you, as well as in developing be
Summary of the content on the page No. 14
Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer
Summary of the content on the page No. 15
· Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and to accommodate your preferred head and neck posture. · General location: Position your monitor to avoid glare or reflections on the screen from overhead lighting or nearby windows. The following are some other tips for comfortable viewing of your monitor: · Use adequate lighting for the type of work you are performing. · Use the monitor brightness, contrast, and image adjustment control
Summary of the content on the page No. 16
Accessibility information Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability. Some of these technologies are already provided in your operating system; others can be purchased through vendors or accessed at: http://www-03.ibm.com/research/accessi
Summary of the content on the page No. 17
To use the controls: 1. Press to open the main OSD menu. 2. Use or to move among the icons. Select an icon and press to access that function. If there is a sub-menu, you can move between options using or , then press to select that function. Use or to make adjustments. Press to save. 3. Press to move backwards through the sub-menus and exit from the OSD. 4. Press and hold for 10 seconds to lock the OSD. This will prevent acc
Summary of the content on the page No. 18
Table 2-2. OSD functions Controls and Controls and OSD Icon Submenu Description Adjustments Adjustments on Main (Digital) (Analog) Menu Adjusts overall brightness. Brightness Same as Brightness- Analog /Contrast Contrast Adjusts difference between light and dark areas. This function can improve your video input contrast ration Dynamic automatically. Contrast Ratio Moves the image left or right. Horizontal Position Controls Image Moves the image up or down. Locked not Posi
Summary of the content on the page No. 19
Table 2-2. OSD functions (continued) Controls and Controls and Submenu Description OSD Icon on Adjustments Adjustments Main Menu (Analog) (Digital) Shows resolution, refresh rate, and product details. Note: Same as This screen does not allow any changes to the settings. Information Analog Options This section lists the languages supported by your monitor. Note: The language chosen only affects the language of the Menu Language OSD. It has no effect on any software runnin
Summary of the content on the page No. 20
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-fre
