Marshall electronic V-LCD15SB-AFHD-DT user manual

Summary of the content on the page No. 1

Specifications (continued)
Marshall Electronics
V-LCD15SB-AFHD-DT
SD/HD SunBrite LCD Monitor
Maintenance
■
Screen Cleaning
Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro-
fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels.
Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the
surface. Antistatic and fingerprint

Summary of the content on the page No. 2

Contents Specifications ■ ■ PANEL TALLY Product Overview.....................................................................................................................................................3 Screen Size 15.0” Diagonal 3 LEDs (Green, Red, Yellow). Activation requires contact Display Area (h x v) 304.128 x 228.096 mm closure of pin to ground on the HD-15 connector: Features .............................................................................................................

Summary of the content on the page No. 3

On-Screen Menu (continued) Product Overview SYSTEM CONFIGURATION SUBMENU The V-LCD15SB-AFHD-DT is a 15” SD/HD video LCD with Marshall Electronics’ proprietary SunBrite LCD panel, designed specifically for outdoor applications or high levels of ambient light. The V-LCD15SB-AFHD-DT features our completely digital TFT-MegaPixel ™ active matrix LCD system. Weighing only 8.1 lbs and only 1.77” deep, this monitor is an ideal lightweight replacement for CRTs used in all broadcast and professional video

Summary of the content on the page No. 4

On-Screen Menu (continued) Installation and Initial Setup VIDEO CONFIGURATION SUBMENU (continued) ■ Unpacking ■ Aspect Ratio Settings Carefully unpack the V-LCD15SB-AFHD-DT monitor and verify that the following items are included: Use to switch between 4:3 and 16:9 aspect ratios. • V-LCD15SB-AFHD-DT Monitor with Attached Desktop Stand • V-PS12-5V-1 Power Supply with Conxall 2-Pin Twist-Lock Connector As the V-LCD15SB-AFHD-DT monitor has a native resolution of 1024 x 768 RGB pixels, incoming imag

Summary of the content on the page No. 5

On-Screen Menu (continued) Front Panel Features VIDEO CONFIGURATION SUBMENU (continued) 1 Power Button ■ Monochrome Mode Turn the monitor on by pressing the power button. In the OFF state, the LED will shine brightly. The Use this setting to enable monochrome mode. Only the luminance of the image will be displayed as a grayscale LED will dim when the monitor is turned on. picture. 1 2 Input Select Buttons Use the input select buttons to select the input to be ■ Blue-Only Mode displayed: Use this

Summary of the content on the page No. 6

On-Screen Menu (continued) Rear Panel Features VIDEO CONFIGURATION SUBMENU 1 4 3 Video Configuration Submenu ■ Color Temperature Presets Use this setting to choose one of three color temperature presets: 2 • D55 (5500K) • D65 (6500K) • D93 (9300K) • USER (Adjustable Color Bias and Gain) Rear Panel ■ Adjusting Color Bias Power Input Tally Interface 1 3 Connect the 12VDC input to the Conxall 2-pin twist-lock Each tally light is activated via the HD-15 connector by power input connector. Power can

Summary of the content on the page No. 7

On-Screen Menu (continued) Compatible Input Formats MARKER SETUP SUBMENU (continued) Format Composite S-Video YPbPr SDI VGA DVI-D ■ 4:3 Markers NTSC ● ● Use this setting to superimpose one of 5 markers on the screen when in 4:3 mode. This setting is disabled when the PAL ● ● aspect ratio is set to 16:9, or when Pixel-to-Pixel ™, Underscan, or H/V Delay is enabled. ● ● 480i / 59.94 • OFF (No Marker) 576i / 50 ● ● • 95% Safe Area • 93% Safe Area 485p / 59.94 ● ● ● • 90% Safe Area • 88% Safe Area 5

Summary of the content on the page No. 8

On-Screen Menu (continued) On-Screen Menu MARKER SETUP SUBMENU STRUCTURE OVERVIEW OFF, 13:9, 14:9, 4:3, 2.35:1, MARKER 16:9 1.85:1, 95%, 93%, 90%, 88%, 80% MARKER SETUP OFF, 95%, 93%, 90%, 88%, MARKER 4:3 80% MARKER BACKGROUND OFF, HALF, BLACK CENTER MARKER OFF, ON COLOR TEMP D55, D65, D93, USER Marker Setup Submenu RED (0-100) ADJ COLOR BIAS GREEN (0-100) ■ 16:9 Markers BLUE (0-100) RED (0-100) Use this setting to superimpose one of 10 markers on the screen when in 16:9 mode. This setting is di