Summary of the content on the page No. 1
SB
MultiSync FE770/FE771
User’s Manual
Summary of the content on the page No. 2
Declaration of the Manufacturer We hereby certify that the colour monitor SB MultiSync FE770/FE771 is in compliance with Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC: EN 55022 – EN 61000-3-2 – EN 61000-3-3 – EN 55024 and marked with NEC-Mitsubishi Electric Visual Systems Corporation 686-1, Nishioi Oi-Machi Ashigarakami-gun Kanagawa 258-8533, Japan ENERGYSTAR Product As an ENERGYSTAR Partner, NEC-Mitsubishi Electronics Display of America, Inc. has determined that this prod
Summary of the content on the page No. 3
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. EFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICE- ABLE PARTS I
Summary of the content on the page No. 4
Contents Your new NEC MultiSync FE monitor box* should contain the following: MultiSync FE Monitor with tilt/swivel base Power Cord Captive Signal Cable User’s Manual CD ROM with Setup Software, complete User’s Manual and other helpful files. To see the User’s Manual, Acrobat Reader 4.0 must be installed on your PC. Captive Signal Cable Power Cord User’s Manual Sales Office List CD-ROM * Remember to save your original box and packing material to transport or ship the monitor. 4 User
Summary of the content on the page No. 5
Quick Start To attach the FE monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system. For more information, refer to the display card manual. 3. For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the Mac: Connect the MultiSync FE Macintosh cable adapter (not included) to the monitor connector on
Summary of the content on the page No. 6
Quick Start – continued Power Outlet Power Cord Figure C.1 Power Button Figure D.1 6 User’s Manual
Summary of the content on the page No. 7
Controls OSM (On-Screen Manager) control buttons on the front of the monitor function as follows: Mu ain Menu Sub-Men EXITEs xits the OSM menu. Exits to the OSM control mainmenu. CONTROL Moves the highlighted Moves the highlighted area area left/rightto select left/rightto selectone ofthe / one ofthe sub-menus. controls. CONTROLH+ as no function. Moves the bar inthe – or –/+ directionto decrease or increase the adjustment. SELECT (FE770)E. nters sub-menu. Has no function SELECT/ WithoutOSD,sw
Summary of the content on the page No. 8
Controls – continued Color Control System Colour presets selects the desired colour setting. The bar is replaced by the colour setting choice. Each colour setting is adjusted at the factory to the stated Kelvin. If a setting is adjusted, the name of the setting will change from Kelvin to Custom except sRGB mode. Red, Green, Blue: Color Control System decreases or increases the monitor's red, green or blue colour guns depending upon which is selected. The change in colour will appear on screen an
Summary of the content on the page No. 9
Controls – continued OSM Lock Out: This control completely locks out access to all OSM controls functions except Brightness and Contrast. When attempting to activate OSM controls while in the lock out mode, a screen will appear indicating that OSM controls are locked out. To activate the OSM Lock Out function, press SELECT and hold + down simultaneously. To deactivate the OSM Lock Out, press SELECT and hold + down simulta- neously. IPM System Off Mode: Enable: The IPM System works normally and a
Summary of the content on the page No. 10
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC FE COLOUR MONITOR: DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. Do not spill any liquids into the cabinet or use your monitor near water. Do not insert objects of any kind into the cabinet
Summary of the content on the page No. 11
Recommended Use – continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. Position your monitor no closer than 40 cm and no further away than 60 cm from your eyes. The optimal distance is 50 cm. Rest your eyes periodically by fo
Summary of the content on the page No. 12
Specifications Monitor MultiSync FE770 Notes Specifications Monitor P: icture Tube Dh iagonal 43 cm/17 inc 90°deflection,0.21 - 0.25 mm variable (horizontal) dotpitch,0.24 - 0.28 mm variable (diagonal) dotpitch,medium Vh iewable Image Size: 406 mm/16 inc shortpersistence phosphor,multi- layered,anti-static screencoating, semi-tintscreen,Invar ShadowMask and OptiClear screen. I: nputSignal Video ANALOG0.7 Vp-p/75 Ohms Sync: Separate sync.TTLLevel Horizontalsync.Positive/Negative Verticalsync.Posi
Summary of the content on the page No. 13
Specifications – continued Monitor MultiSync FE771SB Notes Specifications Monitor P: icture Tube Dh iagonal4, 3 cm/17 inc 90°deflection,0.25 mm grille pitch medium shortpersistence phosphor, Vh iewable Image Size: 406 mm/16 inc aperture grille CRT,multi-layered,anti- static screencoating,dark-tintscreen and OptiClear screen. I: nputSignal Video ANALOG0.7 Vp-p/75 Ohms Sync: Separate sync.TTLLevel Horizontalsync.Positive/Negative Verticalsync.Positive/Negative Composite sync.(Positive/Negative) (T
Summary of the content on the page No. 14
Features ClearFlat Shadow Mask CRT (FE770): Delivers an outstanding viewing experience with a virtually flat image, eliminating distortion and reducing glare so that what you see on-screen is as realistic and lifelike as what you see on your printed output. The patented ClearFlat CRT also offers a high contrast screen with a fine 0.21 - 0.25 mm horizontal dot pitch, delivering crisp, clean text and graphics. SB SuperBright Diamondtron CRT (FE771 ): This patented flat aperture grille CRT delivers
Summary of the content on the page No. 15
Features – continued Reduced Magnetic Field Technology: Reduces magnetic and alternating electric field emissions and static electricity, addressing ergonomic concerns regarding potential risks from extended computer monitor use. Multiple Frequency Technology: Automatically adjusts monitor to the display card’s scanning frequency, thus displaying the resolution required. FullScan Capability: Allows you to use the entire screen area in most resolutions, significantly expanding image size. SB Mult
Summary of the content on the page No. 16
Troubleshooting No picture Display card should be completely seated in its slot. Power Button and computer power switch should be in the ON position. Signal cable should be completely connected to display card/computer. Check connector for bent or pushed-in pins. Image is scrolling or unstable Signal cable should be completely attached to the computer. Check pin assignments and signal timings of the monitor and your display card with respect to recommended timings and pin assignments
Summary of the content on the page No. 17
TCO’99 MultiSync FE Series Congratulations! You have just purchased a TCO’99 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptati
Summary of the content on the page No. 18
TCO’99 – continued TCO’99 demand requires that plastic components weighing more than 25 grams must not contain flame retar- dants with organically bound chlorine and bromine. Flame retardants are allowed in the printed circuit boards since no substitutes are available. Lead** Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system and in higher doses, causes lead poisoning. TCO’99 requirement permits the inclusion of lead since no replacement
