Summary of the content on the page No. 1
OWNER’S MANUAL
Projection Monitor
Owner's Record
The model number and serial number are on the back
of your monitor. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this monitor.
Model: 65HC15
Serial No.:
65HC15
23566732
#01E_01_65HC15 1 5/20/05, 4:22 PM
Black
(E) 65HC15
Index Appendix Operating your Setting up Using the Connecting Introduction
Monitor your Monitor remote control your Monitor
Summary of the content on the page No. 2
Dear Customer, Thank you for purchasing this Toshiba monitor. This manual Child Safety will help you use the many exciting features of your new monitor. Before operating the monitor, please read this It Makes A Difference manual completely, and keep it nearby for future reference. Where Your TV/monitor NOTE: THIS MONITOR Stands DOES NOT CONTAIN A TUNER. Congratulations on your purchase! As you enjoy your new TV/monitor, keep these safety tips in mind: A set-top box (i.e., an analog or digital re
Summary of the content on the page No. 3
Important Safety Instructions Installation, Care, and Service 1) Read these instructions. Installation 2) Keep these instructions. Follow these recommendations and precautions and heed all 3) Heed all warnings. warnings when installing your monitor: 4) Follow all instructions. 16) Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules of the Federal 5) Do not use this apparatus near Communications Com
Summary of the content on the page No. 4
30) [This item applies to projection monitors only.] If the air temperature rises suddenly (for example, when the 24) Always operate this equipment from monitor is first delivered), condensation may form on the a 120 VAC, 60 Hz power source only. lenses. This can make the picture appear distorted or the color appear faded. If this happens, turn off the monitor for 6 to 7 hours to allow the condensation to evaporate. 31)For added protection of your monitor from lightning and 25) Always make sure
Summary of the content on the page No. 5
FCC compliance information to the equipment, the user is encouraged to try to correct Federal Communications Commission (FCC) the interference by one or more of the following measures: This equipment complies with Part 15 of the FCC rules. • Reorient or relocate the receiving antenna. NOTE: This equipment has been tested and found to comply with the limits for a Class B device, pursuant to • Increase the separation between the equipment and the Part 15 of the FCC rules. These limits are designed
Summary of the content on the page No. 6
Important Safety Information ............................. 2-5 Using the LOCKS menu ............................................... 33 Entering the PIN code ............................................ 33 Introduction................................................................ 7 If you cannot remember your PIN code .................. 33 Welcome to Toshiba ......................................................... 7 Using the V-CHIP menu ............................................... 33 Explo
Summary of the content on the page No. 7
E N T PIC SIZE ENTER E R Introduction NOTE: THIS MONITOR DOES NOT CONTAIN A TUNER. Welcome to Toshiba A set-top box (i.e., cable box or analog/digital receiver) is required to Thank you for purchasing this Toshiba Monitor, one of the innovative receive: (1) analog and/or digital projection monitors on the market. The goal of this manual is to broadcast signals from an antenna; guide you through setting up and operating your Toshiba monitor as and (2) analog and/or digital cable. quickly as possi
Summary of the content on the page No. 8
Summary of the content on the page No. 9
Connecting a VCR Note: This connection allows you to watch video tapes. If you have a mono VCR, connect L/Mono to You will need: VCR Audio OUT using only one audio cable. • one set of standard A/V cables If you have a VCR with S-video, use an S-video cable (in the S-video terminals) From Cable Box or Antenna instead of the standard video cable. Do not connect a standard video cable and Stereo VCR an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance IN will be una
Summary of the content on the page No. 10
Connecting a cable converter box and VCR Note: This connection allows you to watch basic and premium cable channels and watch video tapes. If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. To watch basic and premium cable channels, put the monitor in VIDEO 1 mode and set the VCR to channel 3 or 4 (whichever If you have a VCR with S-video, use an S- channel is vacant in your area), and use the converter box to change video cable (in the S-video terminals) instead
Summary of the content on the page No. 11
Summary of the content on the page No. 12
Summary of the content on the page No. 13
Summary of the content on the page No. 14
Connecting two VCRs Note: This connection allows you to record (dub/edit) from one VCR to If you have VCR (VCR1) with S-video, use another VCR while watching a videotape. S-video cables instead of standard video –To record one program while watching another, tune VCR1 to the cables for better picture performance. Do not channel to record, tune VCR2 to the channel to watch, and select connect both a standard video cable and an VIDEO 2 on the monitor. S-video cable to Video-1 (or Video-2) at the Y
Summary of the content on the page No. 15
Summary of the content on the page No. 16
E N PIC SIZE ENTER T E R F POWER INPUT RECALL IN O 1 2 3 4 5 6 7 8 9 +10 100 0 ENT MENU DVDMENU T CV BL/SAT CH VOL VCR DVD MUTE SLEEP TV/VCR PAUSE STOP PLAY FREEZE SOURCE SPLIT REW FF SKIP / SEARCH SWAP REC LIGHT Controlling infrared remote-controlled devices through the monitor (IR pass-through) You can use the monitor’s IR OUT terminal (infrared pass-through) To control the device(s): to remotely operate (through the monitor) many infrared remote- Point the monitor remote control controlled de
Summary of the content on the page No. 17
Connecting an audio system This connection allows you to use an audio amplifier and external Note: speakers and adjust the audio level using the monitor’s remote To hear sound when using an external audio control. amplifier, the volume of both the monitor and the amplifier must be set above 0 (zero). To control the audio, turn on the monitor and the stereo amplifier, For example, if the volume of the monitor is and turn off the built-in speakers (see “Turning off the built-in set to 0, you will
Summary of the content on the page No. 18
Using the remote control Note: Preparing the remote control for use Your monitor’s remote control may not Your monitor remote control can operate your monitor and most operate certain features on your VCR or other cable converter boxes, satellite receivers, VCRs, DVD players, and electronic device. HTIBs (home theater in a box), even if they are different brands. Refer to the owner’s manuals for your other devices to determine their available features. If you have a Toshiba device: If your monit
Summary of the content on the page No. 19
E N T PIC SIZE ENTER E R Learning about the remote control The buttons used for operating the monitor only are described here. POWER turns the monitor on and off POWER RECALL INPUT RECALL displays monitor status information on-screen (page 47) INFO SLEEP sets the monitor to turn off at a specific time (page 42) 12 3 INPUT selects the video input source (page 40) 45 6 MUTE reduces or turns off the sound (page 43) 89 7 Device Switch switches among TV, CBL/SAT, VCR, and DVD modes +10 (pages 20-23)
Summary of the content on the page No. 20
