Summary of the content on the page No. 17
4.. Input.Select. In this function, you can select your desired input source. (VH226H) 5.. System.Setup. Allow you to adjust the system. • Volume : the adjusting range is from 0 to 100. is a hotkey to activate this function. • Aspect.Control : adjusts the aspect ratio to full or 4:3. • OSD.Setup : * Adjusts the horizontal postition (H-Position)/the vertical position (V-Position) of the OSD from 0 to 100. * Adjusts the OSD timeout from 10 to 120. * Enables
Summary of the content on the page No. 18
3.2 Specifications summary (VH226H) Panel.Type TFT LCD Panel.size 21.5" (16:9) wide screen Max...Resolution 1920 x 1080 Pixel.pitch 0.248 mm 2 Brightness.(Typ.) 250 cd/m 2 Brightness.(Max.) 300 cd/m Contrast.Ratio.(Typ.) 1000:1 Contrast.Ratio.(Max.) 12000:1 (with ASCR on) Viewing.angle(H/V).CR>10 170˚/160˚ Display.colors 16.7 M Response.time 2 ms SPLENDID™.Video. Yes Enhancement SPLENDID™.selection 5 video preset modes (by hotkey) Auto.adjustment Yes (by hotkey) Color.temperat
Summary of the content on the page No. 19
Specifications summary (VH226S) Panel.Type TFT LCD Panel.size 21.5" (16:9) wide screen Max...Resolution 1920 x 1080 Pixel.pitch 0.248 mm 2 Brightness.(Typ.) 250 cd/m 2 Brightness.(Max.) 300 cd/m Contrast.Ratio.(Typ.) 1000:1 Contrast.Ratio.(Max.) 12000:1 (with ASCR on) Viewing.angle(H/V).CR>10 170˚/160˚ Display.colors 16.7 M Response.time 2 ms SPLENDID™.Video. Yes Enhancement SPLENDID™.selection 5 video preset modes (by hotkey) Auto.adjustment Yes (by hotkey) Color.temperature.
Summary of the content on the page No. 20
3.3 Troubleshooting (FAQ) Problem Possible.Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. The power LED lights amber and there is • Check if the monitor and the computer are no screen image in the ON mode. • Make sure the signal cable is properly connected the monitor and the computer. • Inspect the si
Summary of the content on the page No. 1
VH226 Series
LCD Monitor
User Guide
Summary of the content on the page No. 2
Contents Notices.......................................................................................................... iii Safety.information....................................................................................... iv Care.&.Cleaning............................................................................................ v Chapter.1:.....Product.introduction 1.1. Welcome!....................................................................................... 1-1 1.2. Package.
Summary of the content on the page No. 3
Notices Federal.Communications.Commission.Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interferen ce that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules
Summary of the content on the page No. 4
Safety information • Before setting up the monitor, carefully read all the documentation tha t came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or m oisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or yo
Summary of the content on the page No. 5
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect th e cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the mon itor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean th e monitor surface with a lint-free, non-abrasive cloth. Stubborn s
Summary of the content on the page No. 6
Where to find more information Refer to the following sources for additional information and for product and software updates. 1.. ASUS.websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2.. Optional.documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standa rd package. vi
Summary of the content on the page No. 7
1.1 Welcome! ® Thank you for purchasing the ASUS VH226 Series LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing exper ience. W i t h t h e s e f e a t u r e s , y o u c a n e n j o y t h e c o n v e n i e n c e a n d d e l i g h t f u l v i s u a l experience that the VH226 Series brings you! 1.2 Package contents Check your
Summary of the content on the page No. 8
1.3 Monitor introduction 1.3.1. Front.view 1 1 2 2 3 3 4 4 5 6 7 7 Base (VH226H) (VH226S) 1. or Button: • U se th i s h o tk e y to sw i tch fr o m fiv e vi d e o p re se t mo d e s (Ga me Mo d e , Night View Mode, Scenery Mode, Standard Mode, Theater Mode) with SPLENDID™ Video Enhancement Technology. • Exit the OSD menu or go back to the previous menu as the OSD menu is active. • Automatically adjust the image to its optimized po
Summary of the content on the page No. 9
7. Power button/power indicator • Press this button to turn the monitor on/off • The color definition of the power indicator is as the below table. Status Description Blue ON Amber Standby mode OFF OFF 1.3.2. Back.view Stereo. Stereo. speaker speaker Screw.holes.for. VESA.Wall.Mount HDMI VGA Rear.connectors (VH226H) (VH226S) 1 2 3 4 5 6 1 3 6 Rear.connectors 1.. AC-IN.port . This port connects the power connector from the bundled power cord. 2. Earphone.
Summary of the content on the page No. 10
1-4 Chapter 1: Product introduction
Summary of the content on the page No. 11
2.1 Assembling the monitor base To assemble the monitor base: 1. Have the front of the monitor face down on a table. 2. Connect the base with the arm according to the below drawing. A click shows that the base has been connected successfully. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. 2.2 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the
Summary of the content on the page No. 12
2.3 Detaching the arm/base (for VESA wall mount) The detachable arm/base of this LCD monitor is specially designed for VESA wall mount. To detach the arm/base: 1. Have the front of the monitor face down on a table. 2. Remove the rubbers in the four screw holes (Figure 1). 3. Use a screwdriver to remove the two screws on the arm (Figure 1), then slide out the arm/base to detach it from the monitor (Figure 2). 1 Rubbers.i
Summary of the content on the page No. 13
2.4 Connecting the cables 1. Connect the cables as the following instructions: (VH226H) (VH226S) Audio-in VGA Earphone jack Audio-in HDMI VGA • To.connect.the.audio.cable : connect one end of the audio cable to the monitor’s Audio-in port, the other end to the computer's audio-out port. • To.connect.the.power.cord : connect one end of the power cord securely to the monitor’s AC input port, the other end to a power outlet. • To.connect.the.VGA/DVI/HDMI.cable : a.
Summary of the content on the page No. 14
2-4 Chapter 2: Setup
Summary of the content on the page No. 15
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure 1. Press the MENU button to activate the OSD menu. 2. Press and to navigate through the functions. Highlight and activate the desired function by pressing the MENU button. If the functio n selected has a sub-menu, press and again to navigate through the sub-menu functions. Highlight and activate the desired sub-menu func tion by pressing the MENU button. 3. Press and to change the
Summary of the content on the page No. 16
2.. Image. You can adjust brightness, contrast, sharpness, saturation, position (VGA only), and focus (VGA only) from this menu. • Brightness : the adjusting range is from 0 to 100. is a hotkey to activate this function. • Contrast : the adjusting range is from 0 to 100. • ASCR : turns on/off the ASCR (ASUS Smart Control Ratio) function. • Sharpness : the adjusting range is from 0 to 100. • Saturation : the adjusting range is from 0 to 100. • Position : ad
