Brother All in One Printer MFC-8220 user manual

User manual for the device Brother All in One Printer MFC-8220

Device: Brother All in One Printer MFC-8220
Size: 6,97 MB
Date of adding : 2014-04-02 12:35:41
Number of pages: 198
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Brother All in One Printer MFC-8220. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Brother All in One Printer MFC-8220.

For your convenience

If looking through the Brother All in One Printer MFC-8220 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manualBrother All in One Printer MFC-8220 on full screen, use the buttonFullscreen.
  • Downloading to your computer - You can also download the user manual Brother All in One Printer MFC-8220 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Brother All in One Printer MFC-8220 user manual
Advertisement
« Page 1 of 198 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Brother All in One Printer MFC-8220 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Brother All in One Printer MFC-8220. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

MFC-8220
SOFTWARE USER’S GUIDE

Summary of the content on the page No. 2

Table of contents 1 Using the MFC as a printer .................................................1-1 Using the Brother MFC printer driver................................1-1 How to print your original document .................................1-2 Manual Duplex Printing...............................................1-2 Face-down output tray................................................1-3 Printing on plain paper................................................1-4 The manual feed tray..............

Summary of the content on the page No. 3

Device Settings tab................................................... 2-21 Layout tab................................................................. 2-22 Paper / Quality tab....................................................2-23 Advanced Options ....................................................2-24 ® 3 How to scan using Windows ............................................3-1 Scanning an original document ....................................... 3-1 TWAIN compliant..........................

Summary of the content on the page No. 4

4 Using the Brother Control Center ......................................4-1 Brother MFL-Pro Control Center.................................4-1 AutoLoad the Brother Control Center .........................4-2 How to turn off AutoLoad............................................4-2 Brother Control Center features........................................4-3 Auto Configuration......................................................4-3 Scan key operations ................................................

Summary of the content on the page No. 5

® 5 Using the Windows -Based Brother SmartUI Control Center ...5-1 Brother SmartUI Control Center ....................................... 5-1 AutoLoad the Brother Control Center......................... 5-2 How to turn off AutoLoad............................................ 5-2 Brother Control Center features ....................................... 5-3 Auto Configuration......................................................5-4 Hardware Section: Changing the Scan to button configuration........

Summary of the content on the page No. 6

User interface .............................................................7-5 Simple style ............................................................7-5 Facsimile style........................................................7-5 Speed-Dial setup ..............................................................7-6 The Address Book ......................................................7-7 Setting up a Member in the Address Book .................7-8 Setting up a Group for Broadcasting .............

Summary of the content on the page No. 7

Using the Brother TWAIN scanner driver with your ® Macintosh .................................................................8-20 Accessing the scanner .............................................8-20 ® Scanning an image into your Macintosh ................. 8-21 Scanning a whole page ........................................ 8-21 Pre-Scanning an image............................................ 8-22 Settings in the Scanner window ...............................8-23 Image .....................

Summary of the content on the page No. 8

Using the MFC as a printer 1 Using the Brother MFC printer driver A Printer Driver is software that translates data from the format used by a computer into the format required by a particular printer, using a printer command language or page description language. The printer drivers are on the CD-ROM we have supplied. Install the drivers first by following the Quick Setup Guide. Also, the latest printer driver can be downloaded from the Brother Solutions Center at: http://solutions.brother.

Summary of the content on the page No. 9

How to print your original document When the MFC receives data from your computer, it begins printing by picking up paper from the paper tray. The paper tray can feed many types of paper and envelopes. 1 From your computer select the Print command. If your computer is also connected to any other printers, select MFC-8220 (USB) Printer or Brother MFC-8220 as your printer driver from the Print or Print Settings menu in your software application, and then click on OK to begin printing. 2 Your

Summary of the content on the page No. 10

Face-down output tray The MFC ejects paper with printed surfaces face down into the output tray in the front of the MFC. Unfold the support flap to support the printed pages. When printing transparencies, remove each one from the support flap after it exits the MFC. Support Flap with Extension 1 - 3 USING THE MFC AS A PRINTER

Summary of the content on the page No. 11

Printing on plain paper The manual feed tray The MFC automatically turns on the Manual Feed mode when you put paper in the manual feed tray. 1 Select the Paper Size, Media Type, Paper Source, and other settings in the printer driver. Media Type: Plain Paper Paper Source: Manual 2 Open the manual feed tray. Slide the paper guides to fit the paper size. 3 Using both hands put paper in the manual feed tray face up until the front edge of the paper touches the paper feed roller and the MFC grip

Summary of the content on the page No. 12

Printing on thicker paper and card stock When the back output tray is pulled down, the MFC has a straight paper path from the manual feed tray through to the back of the MFC. Use this paper feed and output method when you want to print on thicker paper or card stock. The manual feed tray 1 Select the Paper Size, Media Type, Paper Source, and other settings in the printer driver. Media Type: Thick paper or Thicker paper Paper Source: Manual 2 Open the back output tray. 3 Open the manual feed

Summary of the content on the page No. 13

5 Send the print data to the MFC. 6 After the printed page comes out of the MFC, put in the next sheet of paper as in Step 4. Repeat for each page that you want to print. 7 When you have finished the print job, close the back output tray. Caution Remove each sheet immediately after printing. Stacking the sheets may cause a paper jam or the paper to curl. USING THE MFC AS A PRINTER 1 - 6

Summary of the content on the page No. 14

Printing on envelopes To print on envelopes use manual feed tray ■ The MFC automatically turns on the Manual Feed mode when you put paper in the manual feed tray. ■ All sides should be properly folded without any wrinkles or creases. 1 Select the Paper Size, Media Type, Paper Source, and other settings in the printer driver. Media Type: Envelope, Env.Thin or Env.Thick 2 Open the back output tray. 1 - 7 USING THE MFC AS A PRINTER

Summary of the content on the page No. 15

3 Open the manual feed tray. Slide the paper guides to fit the envelope size. If envelopes are creased after they have been printed: At the back of the MFC, open the back output tray and push down the blue tabs at the left and right hand sides (as shown in the figure on the next page). When you have finished printing your envelopes, close the back output tray to reset the two blue tabs back to their original position. USING THE MFC AS A PRINTER 1 - 8

Summary of the content on the page No. 16

4 Using both hands put the envelope in the manual feed tray face up until the front edge of the envelope touches the paper feed roller and the MFC grips the envelope. ■ Make sure the envelope is straight as you insert it in the manual feed tray. If it is not, the envelope may not be fed properly, resulting in a skewed printout or a jam. ■ Do not put more than one envelope in the manual feed tray at any one time, or it may cause a jam. ■ Put the envelope in the manual feed tray, making sure

Summary of the content on the page No. 17

Simultaneous printing and faxing Your MFC can print from your computer while sending or receiving a fax, or while scanning an original document into the computer. Fax sending will not be stopped during PC printing. Printer operation keys Job Cancel You can clear data from the memory by pressing the Job Cancel key. Secure key Secured data is password protected. Only those people that know the password will be able to print the data. The MFC will not print secure data until the password is en

Summary of the content on the page No. 18

3 Press or to select the job. Job? Text1 Press Set. The LCD prompts you to enter your four-digit password. 4 Enter your password using the Text1 control panel. Password:XXXX Press Set. 5Press or to select Print. Press Set. The MFC prints the data. —OR— If you want to delete the secured data, press or to select Delete and press Set. ■ If you turn the MFC power switch off, the secured data saved in memory will be cleared. ■ After you print the secured data it will be cleared from memory

Summary of the content on the page No. 19

Setting the Emulation Selection Your MFC will receive print commands in a printer job language or Emulation. Different operating systems and applications will send the print commands in different languages. Your MFC can receive print commands in a variety of emulation’s. This MFC has an Automatic Emulation Selection setting. When the MFC receives information from the PC, it automatically chooses the emulation mode. This setting has been set at the factory to AUTO. You can change the defaul

Summary of the content on the page No. 20

Printing the Internal Font List You can print a list of the MFC’s internal (or resident) fonts to see how each font looks before you select it. 1 Press Menu, 4, 2, 1. Print Options 1.Internal Font 2 Press Start. The MFC prints the list. 3 Press Stop/Exit. Printing the Print Configuration List You can print a list of current printer settings. 1 Press Menu, 4, 2, 2. Print Options 2.Configuration 2 Press Start. The MFC prints the settings. 3 Press Stop/Exit. Restoring default settings You can ret


Similar user manuals
# User manual Category Download
1 Brother 8710DW All in One Printer 14
2 Brother All in One Printer BE-1206B-BC All in One Printer 37
3 Brother All in One Printer 340 All in One Printer 27
4 Brother ADVANCED MFC-7460DN All in One Printer 24
5 Brother ADVANCED MFC-7360 All in One Printer 29