NEC MultiSync LCD4610, LCD4610 user manual

User manual for the device NEC MultiSync LCD4610, LCD4610

Device: NEC MultiSync LCD4610, LCD4610
Category: Computer Monitor
Manufacturer: NEC
Size: 5.8 MB
Added : 5/31/2014
Number of pages: 38
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for NEC MultiSync LCD4610, LCD4610. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with NEC MultiSync LCD4610, LCD4610.

For your convenience

If looking through the NEC MultiSync LCD4610, LCD4610 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual NEC MultiSync LCD4610, LCD4610 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual NEC MultiSync LCD4610, LCD4610 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
NEC MultiSync LCD4610, LCD4610 User manual - Online PDF
Advertisement
« Page 1 of 38 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual NEC MultiSync LCD4610, LCD4610 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to NEC MultiSync LCD4610, LCD4610. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

MultiSync LCD4010
40" LCD Colour Monitor
MultiSync LCD4610
46" LCD Colour Monitor
User’s Manual

Summary of the content on the page No. 2

Index Declaration of conformity ............................................................................................................................. English-1 Important Information ................................................................................................................................... English-2 Warning, Caution ......................................................................................................................................... English-2 Dec

Summary of the content on the page No. 3

DECLARATION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: NEC Display Solutions of America, Inc. Address: 500 Park Boulevard, Suite 1100 Itasca, Illinois 60143 Tel. No.: (630) 467-3000 Type of Product: Computer Monitor Equipment Classif

Summary of the content on the page No. 4

Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE

Summary of the content on the page No. 5

Safety Precautions, Maintenance & Recommended Use FOR OPTIMUM PERFORMANCE, PLEASE NOTE Immediately unplug your monitor from the wall outlet and refer THE FOLLOWING WHEN SETTING UP AND USING servicing to qualified service personnel under the following THE MULTISYNC LCD4010 / MULTISYNC LCD4610 conditions: LCD COLOUR MONITOR: • When the power supply cord or plug is damaged. • DO NOT OPEN THE MONITOR. There are no user • If liquid has been spilled, or objects have fallen into the serviceable parts i

Summary of the content on the page No. 6

Contents Your new MultiSync LCD4010 / MultiSync LCD4610 monitor box* should contain the following: • LCD monitor • Band x 2 • Power Cord (3m) • Ferrite Core x 2 • Video Signal Cable — SC-B113 (4m) • Speaker Plug x 1set (Required for optional Loudspeakers) • User’s Manual • Stand for the Independence x 2 • Wireless Remote Control and AA Batteries • Thumbscrew for stand x 2 • Clamper x 3 • Main switch cover • Screw (M4 x 8) x 4 • CD-ROM Thumbscrew for stand x 2 Stand for the Independence x 2 Power

Summary of the content on the page No. 7

Parts Name and Functions Control Panel 9 EXIT INPUT MUTE 10 Button Location EXIT INPUT MUTE OFF ON 8 7 6 5 4 3 2 1 1 POWER button ( ) 7 DOWN ( ) button Switches the power on/off. See also page 18. Activates the OSM menu when the OSM menu is turned-off. Acts as button to move the highlighted area down to select the adjustment with OSM menu. 2 MUTE button Switches the audio mute ON/OFF. 8 EXIT button Activates the OSM menu when the OSM menu is turned-off. 3 INPUT button Acts as EXIT button to mov

Summary of the content on the page No. 8

Terminal Panel 1 AC IN connector 7 AUDIO IN 1, 2, 3 Connects with the supplied power cord. To input audio signal from external equipment such as a computer, VCR or DVD player. 2 RGB 1 IN (DVI-D) 8 AUDIO OUT To input digital RGB signals from a computer or HDTV device having a digital RGB output. To output the audio signal from the AUDIO IN 1, 2 and 3 jack. * This connector does not support analog input. 9 VIDEO INPUT/OUTPUT CONNECTOR VIDEO IN connector (BNC and RCA): To input a composite 3 RGB 2

Summary of the content on the page No. 9

Wireless Remote Control 6 MUTE button To switch the mute function on/off. 7 VOLUME UP button Increases the audio output level. 8 VOLUME DOWN button Decreases the audio output level. 9 PIP (Picture In Picture) button ON/OFF button: Toggle switches between PIP, POP, side-by-side (aspect) and side-by-side (full). See page 23. INPUT button: Selects the “picture in picture” input signal. CHANGE button: Replaces to the main picture and sub picture. 10 STILL button ON/OFF button: To switch the still pi

Summary of the content on the page No. 10

Operating Range for the Remote Control Point the top of the remote control toward the LCD monitor’s Handling the remote control remote sensor during button operation. Use the remote control within a distance of about 7 m/23 ft. * Do not subject to strong shock. from the front of the LCD monitor’s remote control sensor * Do not allow water or other liquid to splash the remote and at a horizontal and vertical angle of within 30° within a control. If the remote control gets wet, wipe it dry distanc

Summary of the content on the page No. 11

Setup Procedure 1. Determine the installation location 3. Connect external equipment (See pages 12-17) CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF. • To protect the connected equipment, turn off the main power before making connections. Installing your LCD display must be done by a qualified • Refer to your equipment user manual. technician. Contact your dealer for more information. 4. Connect the supplied power cord CAUTION: MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE B

Summary of the content on the page No. 12

10. Recommended Adjustment To reduce the risk of “image persistence”, please adjust the following items based on the application being used. “SCREEN SAVER” (See page 24), “SIDE BORDER COLOR” (See page 24), “DATE & TIME” (See page 28), “SCHEDULE” (See page 28). 11. When the monitor is installed in the portrait position • Remove the stands (feet). • Left edge should be the upper edge from front view. 12. Installing and removing stand Speaker terminal How to install stand 1. Please turn monitor off

Summary of the content on the page No. 13

How to Mount and Attach Options to the LCD Monitor You can attach mounting accessories to the LCD monitor in 3. Ventilation Requirements for enclosure one of the following two ways: mounting To allow heat to disperse, leave space between surrounding 1. In the upright position objects as shown in the diagram below. 4. To avoid falling down Fasten the LCD monitor to wall using a cord or chain, which is sufficient to support the weight of the LCD monitor (approx. LCD4010: 27,5kg / LCD4610: 35,7kg).

Summary of the content on the page No. 14

Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram Personal computer LCD monitor DVD player Personal computer VCR Equipment with LCD monitor (second monitor) digital interface Attaching the Ferrite Core Mounting Position of Ferrite Core Attach the Ferrite Core to PC Audio Cable. Use of the cable without mounting the ferrite core will result

Summary of the content on the page No. 15

Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer’s screen image. Some video cards may not display an image correctly. Scanning frequency Resolution Remarks Horizontal Vertical 640 x 480 31.5kHz 60Hz 800 x 600 37.9kHz 60Hz 1024 x 768 48.4kHz 60Hz 1280 x 768 48kHz 60Hz 1360 x 768 48kHz 60Hz Recommended resolution 1280 x 1024 64kHz 60Hz Compressed image 1600 x 1200 75kHz 60Hz Compressed image Connect the LCD Monitor to a Personal C

Summary of the content on the page No. 16

Connecting to a Macintosh Computer Connecting your Macintosh computer to your LCD monitor will enable you to display your computer’s screen image. Some video cards or drivers may not display images correctly. Connect the LCD Monitor to Macintosh • To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin). • To connect the RGB 3 IN connector (BNC) on the LCD monitor, use the signal cable availabl

Summary of the content on the page No. 17

Connecting with Digital Interface Equipment Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a Computer with a Digital Output • The RGB 1 IN connector also accepts a DVI-D cable. • Input TMDS signals conforming to DVI standards. • To maintain display quality, use a cable with a quality prescribed by DVI standards. • The AUDIO IN 1, 2 and 3 can be used for audio input. For connec

Summary of the content on the page No. 18

Connecting a DVD Player with component out Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refer to your DVD player user’s manual for more information. Connect the LCD Monitor to a DVD Player • To connect the DVD/HD IN connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will need a BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided). Some DVD players may have different c

Summary of the content on the page No. 19

Connecting to a Stereo Amplifier You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier owner’s manual for more information. Connect the LCD Monitor to a Stereo Amplifier • Turn on the LCD monitor and the amplifier only after all connections have been made. • Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LCD monitor and the audio input on the amplifier. • Do not reverse the audio left and right jacks. • The AUDIO IN is used for audio input. • The AU

Summary of the content on the page No. 20

Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on, or red when in off mode. The monitor can be powered on or off using the following three options: 1. Pressing the power button. Note: Before pressing the power button, be sure to turn on the Main Power Switch on the LCD monitor. Power Button 2. Using the remote control. Note: Before operating the remote control, be sure to turn on the Main Power Switch on the LCD monitor. 3. Pressing the Main


Alternative user manuals
# User manual Category Download
1 NEC 175VXM User manual Computer Monitor 20
2 NEC 42VP4 User manual Computer Monitor 6
3 NEC 50XC10 User manual Computer Monitor 5
4 NEC 1850X User manual Computer Monitor 6
5 NEC 2000 Series User manual Computer Monitor 6
6 NEC 42XM3 PX-42XM3A User manual Computer Monitor 4
7 NEC 73V User manual Computer Monitor 15
8 NEC A Series User manual Computer Monitor 0
9 NEC 750F User manual Computer Monitor 0
10 NEC 90M User manual Computer Monitor 1
11 NEC AccuSync 90 User manual Computer Monitor 2
12 NEC AccuSync AS120 User manual Computer Monitor 0
13 NEC AccuSync AS171 User manual Computer Monitor 0
14 NEC AccuSync AS50M User manual Computer Monitor 0
15 NEC 4200W User manual Computer Monitor 0
16 Sony BVM-L170 User manual Computer Monitor 7
17 Sony DDM-2802CNU User manual Computer Monitor 1
18 Sony BVM-D20F1U, BVM-D20F1E, BVM-D20F1A, BVM-D24E1WU, BVM-D24E1WE, BVM-D24E1WA, BVM-D32E1WU, BVM-D32E1WE, BVM-D32E1WA User manual Computer Monitor 15
19 Sony 500A3WE User manual Computer Monitor 8
20 Sony CPD-17SF2 User manual Computer Monitor 10