Summary of the content on the page No. 1
QUICK REFERENCE GUIDE
MD21GS-3MP
Summary of the content on the page No. 2
Index Warning .................................................................................................................... 1 Contents ................................................................................................................. 3 Quick Start ............................................................................................................. 4 Controls .............................................................................................................
Summary of the content on the page No. 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PL
Summary of the content on the page No. 4
Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 601.1. FCC Information 1. Use the attached specified cables with the MD21GS-3MP grayscale display so as not to interfere with radio and television reception. (A) Please use the supplied power cord or equivalent
Summary of the content on the page No. 5
Contents Your new NEC Display monitor box* should contain the following: • MD21GS-3MP Display with tilt/swivel/pivot/height adjustable stand *2 • Power Cords (N.A. Hospital Grade, Europe Continental and Chinese ) • Quick Reference & Setup Guide • Installation and Maintenance Guide • CD-ROM (GammaComp MD) • Video Signal Cable (DVI-D to DVI-D cable) Power Cord Video Signal Cable INSTALLATION & MAINTENANCE GUIDE QUICK REFERENCE & SETUP GUIDE MD21GS-3MP MD21GS-3MP CD-ROM Installation and Quick Refer
Summary of the content on the page No. 6
Quick Start Optional Display Card Installation 1. Following your PC manufacturer’s guidelines, open your computer to access a PCI slot. 2. Place the display card into an available PCI slot and secure all screws. 3. Replace the computer cover. NOTE: For installing driver information, display modes in multimonitor mode, the setting the dip switch, please reference the display card manufacturer’s documentation. Connecting the LCD to Your PC Once the display card is successfully installed, following
Summary of the content on the page No. 7
Quick Start –continued Figure A.1 Figure B.1 Port 2 for Dual Monitor Figure D.1 Figure C.1 5 MD21GS3MPquickstart.p65 5 7/22/04, 9:52 AM
Summary of the content on the page No. 8
User Controls 1. LED Indicates power on and signal condition. The LED can be turned on, off, or dimmed. Please refer to the Advanced OSM section/LED Brightness for further information. Green – signal is present and power is on Orange – no signal 2. RESET Resets the highlighted control menu to the factory setting. 3. SELECT Enters the OSM controls and OSM sub menu. 4/5. ADJUST -/+ Moves the bar left/right to increase or decrease the adjustment. 6/7. CONTROL Moves the highlighted area left/rig
Summary of the content on the page No. 9
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE NEC DISPLAY: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your display near water. • Do not insert objects of any kind into the cabinet slots, as they
Summary of the content on the page No. 10
Recommended Use –continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE DISPLAY: • For optimum results during self and copy calibrations, allow 30 minutes for warm-up. • Adjust the display height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your display no closer than 16 inches and no further away tha
Summary of the content on the page No. 11
Specifications Display Specifications MD21GS-3MP Monitor Notes LCD Module Diagonal: 54 cm/21.3 inches Active matrix; thin film transistor (TFT) liquid Viewable Image Size: 54 cm/21.3 inches crystal display (LCD); 0.2115 mm dot pitch; 2 Native Resolution (Pixel Count): 1536 x 2048(Portrait) 400 cd/m calibrated white luminance; 2048 x 1536 (Landscape) 700:1 contrast ratio, typical. Input Signal Video: Digital Input: DVI VideoDot Clock 162MHz Max Grayscale Tones 10 Bit: 1024 (10bit) shades of g
Summary of the content on the page No. 12
References North America and Canada NEC-Mitsubishi Monitor Customer Service & Support Customer Service and Technical Support: (800) 632-4662 Fax: (800) 695-3044 Parts and Accessories/Macintosh Cable Adapter: (888) NEC-MITS [888-632-6487] Warranty Information: www.necmitsubishi.com/warranty Online Technical Support www.necmitsubishi.com/support Sales and Product Information Sales Information Line: (888) NEC-MITS [888-632-6487] Canadian Customers: (866) 771-0266, Ext#: 4037 Government Sales: (800)
