Summary of the content on the page No. 1
Model
UserGuide
TM
UserGuide
©2006, Shure Incorporated
27A8781 (Rev. 1)
Summary of the content on the page No. 2
CONTENT User Guide ® ConferenceONE™i Discussion System with IntelliMix 1 Introduction 2 1.1 Features 2 1.2 Components 2 2 Description 3 2.1 Power Supply Unit C1-PS 60i 3/4 2.2 Delegate Console C1-Di 5 2.3 Chairman Console C1-Ci 6/7 3 Setting Up 7 3.1 General Notes 7 3.2 Possible Configurations 8 4 System Settings 9 4.1 Power Supply Unit 9 4.2 Chairman Console 10 4.2.1 Status Page 10 4.2.2 Using the Menu 10/11 4.3 Test Mode 12 4.4 Language Selection 12 5 AEC / Telco Audio Interface 13 5.1 Interfa
Summary of the content on the page No. 3
1 1 Introduction The Shure’s ConferenceONE™i Discussion System is extremely easy to install and use. It was developed for use at conferences, meetings, platform discussions and other comparable applications. Due to its integrated loudspeakers, the ConferenceONE™i Discussion System also functions as a completely self-contained public address system which can be expanded by connecting external devices such as mixers, wireless microphones, music sources, recorders or if required, external PA syste
Summary of the content on the page No. 4
2 2 Description 2.1 Power Supply Unit C1-PS 60i The power supply unit C1-PS 60i supplies the consoles with power and serves as an interface to external devices. Front view 6 1 2 3 4 5 7 5 1 Daisy chain socket Power LED Minicon socket connecting the consoles via Illuminates when the unit is switched on with the power switch. bus cables. 2 6 Audio input Protect LED The ON/OFF button activates the audio During normal operation, this illuminates input on the rear of the unit. The UP/DOWN when you
Summary of the content on the page No. 5
2 Rear view 1 2 3 4 5 6 7 8 1 5 Power socket Remote socket Socket with integrated fuse. SUB-D 9 socket for external control systems such as Crestron + AMX. 2 6 Input level + Phantom power switch AEC / TELCO AUDIO INTERFACE Switches the audio input sensitivity Balanced Audio Interface to connect an between microphone and line level and external phone hybrid or video conference adds phantom power for condenser system through 6-pin block connector microphones. terminal. The slider switches adjust a
Summary of the content on the page No. 6
2 2.2 Delegate Console C1-Di 4 1 2 3 5 6 7 Top view Rear view 1 5 Microphone arm Headphone volume control Adjusts the headphone volume. Fold-out arm with telescopic microphone. 2 6 Daisy chain sockets Lightring Minicon socket for connection and Illuminates when the microphone of the through-connection of the console bus. console is active. Blinks in manual mode if The sockets are interchangeable; either the PTT button is pressed and the one may be used as an input or an maximum number of mi
Summary of the content on the page No. 7
2 2.3 Chairman Console C1-Ci 9 4 7 1 8 2 3 5 6 Top view 6 1 Microphone arm CANCEL button Pressing this button switches off all active Fold-out arm with telescopic microphone. microphones in the system except the microphone of the chairman console. 2 7 Lightring SELECT button Illuminates when the microphone of the Press to select functions on the menu. console is active. 3 PTT button 8 UP/DOWN buttons Activates the microphone in manual mode. Used for navigation in the menu, for setting param
Summary of the content on the page No. 8
3 2 1 3 Rear view 1 3 Headphone volume control Headphone socket Adjusts the headphone volume. 1/8” stereo headphone socket. The console speaker switches off when you connect headphones. CAUTION: Use only stereo plugs! 2 Daisy chain sockets Minicon socket for connection and through-connection of the console bus. The sockets are interchangeable; either one may be used as an input or an output. 3 Setting Up 3.1 General Notes A functional system consists of a power supply unit, a chairman cons
Summary of the content on the page No. 9
3 3.2 Possible Configurations For small systems, up to 15 consoles can be connected directly to the Minicon socket on the front of the power supply unit. The bus cable is connected from each console to the next. C1-PS 60i Power supply unit C1-B 2/5/10 Bus cable C1-Ci C1-Di Chairman Delegate console console Larger systems with more than 15 consoles or in systems where the first console is more than 10 meters away from the power supply unit must be set up with the enclosed Powerline cable (C1-P
Summary of the content on the page No. 10
4 4 System Settings All adjustments to the settings of the conference system are made on the chairman console. The controls located on the power supply unit adjust signal input and output for external devices. 4.1 Power Supply Unit The slide switch beside the input socket on the rear of the power supply unit sets the sensitivity of the audio input between microphone level and line level. The third position of the switch provides 13 V Phantom power to a connected condenser microphone. Press
Summary of the content on the page No. 11
4 4.2 Chairman Console The system is configured from the chairman's console with the aid of the LCD and the three buttons below it: SELECT, and. 4.2.1 Status Page In normal operating mode, the display shows the status page with the current settings. The display always returns automatically to this status page if there is no user activity for ten seconds. Volume Chime ON/OFF Volume 12 Manual Limit 4 Mode Maximum active microphones 4.2.2 Using the Menu Volume 12 In Automatic mode, mic
Summary of the content on the page No. 12
4 Use the Mode menu item to select either the Manual Mode or Automatic (Auto) operating mode. Manual Auto In manual mode, you can use the Limit menu item to Manual Mode specify the maximum number of microphones that can be activated simultaneously in addition to the chairman Limit 4 console. If the Limit is set to 1, the timer is displayed. Press orbuttons to change the value and then press SELECT to return to the status page. Note: The Limit menu item is available only in Manua
Summary of the content on the page No. 13
4 4.3 Test Mode Activate test mode by pressing and holding both of the ConferenceOne andbuttons for approximately three seconds. The installed software version appears in the display and SHURE Ver .1.0i the lighted rings on all delegate consoles illuminate in order to permit simple detection of any cable breakage or defective consoles. Press the SELECT button to return to normal operating mode. 4.4 Language Selection Access the Language selection menu by pressing and Select Language h
Summary of the content on the page No. 14
5 5 AEC / Telco Audio Interface This interface provides a dedicated termination to connect the discussion system directly to most external telephone hybrids or videoconference codecs, enabling users of the system to communicate with remote parties. When used in conjunction with a telephone hybrid, the ConferenceONE™ discussion system can communicate with distant parties over standard telephone lines. When used in conjunction with a videoconference codec, the ConferenceONE™ provides the audio p
Summary of the content on the page No. 15
6 6 System Operation The ConferenceONE™i Discussion System can be operated in either of the two operating modes described below. 6.1 Manual Mode In manual mode, each console microphone is activated by simply pressing the PTT button and deactivated by pressing this button again. However, the number of simultaneously active microphones is limited to a value between one and eight according to the limit set in the menu of the chairman console. If the maximum number of active microphones is set to
Summary of the content on the page No. 16
6 6.3 Operating Instructions To set the volume of the system: 1. Press orbutton to change the volume 2. Press SELECT to return to the Status Page To select Operating mode: 1. Press SELECT to access the Setup menu 2. Press orbutton until the Mode menu is underlined in the display 3. Press SELECT to access the Mode menu 4. Press orbutton until the Mode menu is underlined 5. Press SELECT to activate and return to the Status Page To limit the number of active microphones: 1. Press SELECT to
Summary of the content on the page No. 17
7 7 Troubleshooting Remedy Problem Green Power LED is off • Is the power cable plugged in? • Is the power switch set to ON (I)? • Check the main fuse in the power socket. • Check that the maximum permissible number of Red Protect LED illuminates consoles has not been exceeded (60). • Disconnect all consoles and cables. If the LED still illuminates, send the power supply unit to an authorized workshop for repair. • Activate the test mode. • Connect the consoles and cables one at a time to the
Summary of the content on the page No. 18
8 8 Technical Data Power supply unit C1-PS 60i Mains voltage C1-PS 60i A: 120 V AC, 50/60 Hz C1-PS 60i J: 100 V AC, 50/60 Hz C1-PS 60i E, C1-PS 60i UK : 220 - 240 V AC, 50/60 Hz Power rating: 330 VA Primary Fuses C1-PS 60i A: T4A C1-PS 60i J: T5A C1-PS 60i E, C1-PS 60i UK : T2A Secondary Fuses: 2 x T8A Bus supply voltage: +/- 24 V DC nom. AEC / Telco Microphone Line Aux Audio inputs Audio Interface (balanced) (balanced) (unbalanced) (balanced) Impendance 8 kOhm 8 kOhm 50 kOhm 50 kOhm Input Clipp
Summary of the content on the page No. 19
8 Consoles Power rating Delegate console C1-Di: 1,7 W Chairman console C1-Ci: 5,3 W Microphone ® Microphone type: Electret-condenser (Microflex ) Directional characteristic: Supercardioid Headphone output Output impedance: 4 Ohm Socket: 1/8” stereo jack socket Performance Microphone to audio output Frequency range: 100 Hz – 15 kHz Distortion factor: ≤ 0,3 % Audio input to audio output Frequency range: 50 Hz – 18 kHz Distortion factor: ≤ 0,3 % Mechanical data Dimensions (H x W x D) Power supply u
Summary of the content on the page No. 20
8
