Summary of the content on the page No. 1
INSTRUCTION BOOK
Summary of the content on the page No. 2
Congratulations from AEG Dear Customer, Congratulations with your new Hob. It is important that you become familiar with the functions and features of the Hob. You should therefore read these operating instructions as they will help you get the most out of your new Hob. Pay extra attention to sections marked . These are warning texts to help you avoid accidents. Keep the operating instructions. They will come in handy if there is something you are not sure about, and should accompany
Summary of the content on the page No. 3
Summary of the content on the page No. 4
The hob unit is intended for ordinary the cleaning agents used. household cooking purposes. Any other use can result in damage to the Please read the warranty. unit as well as personal injury. Service During use Service and repair may only be During deep-fat frying, sauteèing, performed by the distributor, or by a melting of butter, etc., one must always service organization approved by the remain near the unit, due to the danger distributor. Only repair parts delivered o
Summary of the content on the page No. 5
That the safety rules in the instructions frying receptacle. The filter dome have not been complied with. must face upwards when in position. That repair has been made by others than an authorised service technician. Wash the grill grid, place it on the grill The unoriginal spare parts have been and turn on the grill (step 12). Leave it used. on for 3 minutes. That the damage is caused by transport at a later date, for instance during Installation removal or resale. The electrical install
Summary of the content on the page No. 6
Please keep children out of reach!! Remember that the grid, the lava block, the heating elements and the frying oil remain searing hot for a long period after you have turned off the appliance. Never pour water into hot frying-oil. If the frying oil catches fire, turn off the extractor hood. Suffocate the fire by covering it with the lid, a pan, baking tray or similar object. Never try to put out the fire with water. Steel cover The cover supplied may only be used on this model.
Summary of the content on the page No. 7
MIN Steel cover Frying basket Max oil level Heating elements for grill Min oil level Control lamp Heating element for fryer Control knob
Summary of the content on the page No. 8
Operation of the grill Control knob for grill. The grilling temperature is adjustable. ! " Kontrolleuchte für die Kombi-Grill "0" The grill is switched off 190˚ "1" is on low setting 170˚ "9" is on high setting Control lamp The control lamp is activated as long as the grill switches is turned on Grilling Instead of lava blocks, water may be used. Operation of the fryer Control knob for fryer. The temper
Summary of the content on the page No. 9
Frying Make sure the heating element is positioned at the bottom. Oil is poured into the frying container. The “Min” mark must be observed. This corresponds to an oil content of 1,5 liters. Maximum amount of oil in the container is 3,5 litres. The grill elements stay turned down and the fryer may be switched on at the desired temperature setting. The lid may be on the fryer to shorten the preheatingtime. NB!! Grill and fryer cannot be used at the same time.
Summary of the content on the page No. 10
Overheating protection Overheating protection during any overheating of the oil at the fryer will switch the inserted overheating protection off the friteuse. Customer service for the remedy of the disturbance contacts. Steel lid for the fryer When using the combi-grill as a fryer you can place the steel lid on top of the frying container, it will shorten the preheating time.
Summary of the content on the page No. 11
The heating elements and the oil will stay hot long time after the combi-grill has been shut off. Do never pour water into the hot oil as the water explosively will start boiling Splashquard The splashquard can be removed to make it easier to clean the surface. What to do: 1. Hold the splashquard as shown in the diagram 2. Lift the splashquard straight up 3. Clean the top surface as
Summary of the content on the page No. 12
have become very soiled. You can Stainless steel surfaces clean the stones in two ways. Perform daily cleaning with a slightly damp cloth. For more severe soiling, 1. Boil the stones in water added use a liquid scouring cream. Always washings up liquid. clean the steel in the direction of the 2. Place the stones in the frying basket steel finish. To ensure that the steel and wash it all in the dishwasher. retains its shine, it is recommended that you use a polishing agent
Summary of the content on the page No. 13
1. Remove the safety shield from the drain cock. # 2. Place a bowl under the drain cock. Make sure the bowl is large enough to hold the oil in the container. 3. Open the drain cock and let the oil run into the bowl. 4. Close the drain cock. The frying container The drain cock must closed. 1. Remove the metal filter and wash it in warm soap water. $ 2. Pour warm water with washing-up liquid in the container. You can leav
Summary of the content on the page No. 14
Element voltage 240 V Electrical connections 240 V, 1 phase, neutral + earth Total power consumption 2300 W This unit is labelled to indicate conformity with the low voltage directive ( 73/23/EEC ) and the EMC directive ( 89/336/EEC ).
Summary of the content on the page No. 15
The hob unit can be mounted in any
type of kitchen with a table surface whose thickness is between 28 mm and
40 mm.
Fixing Unscrew the fixing brackets just enough so they may be turmed. Fasten the brackets to the worktop with a screw driver. Cut-out measurements One rectangular hole is sawn out for the hob combination chosen. The depth of the cut-out for any unit is
Summary of the content on the page No. 16
If the hob is mounted in a 270 X 490 mm cutout, or if for other reasons there is no room for the side attachments, these should be removed before the hob is set into the table. Set the hob into the table and then raise it enough to expose the screws in the sides. Remove the screws. Mount the attachment fittings so that they interlock with the frame (See illustration). Reinsert the screws in the sides through the oblong hole
Summary of the content on the page No. 17
The units externally measured length 145 mm: Cooker hood 290 mm: Two-burner ceramic-top electric hob Two-burner gas hob Grill Fryer Combi grill 580 mm: Four-zone ceramic-top electric hob Four-burner gas hob 725 mm: Four-zone ceramic-top electric hob
Summary of the content on the page No. 18
The electrical installation must only be made by a certified electrician. The electrical installation must be made according to prevailing regulations for heavy current installations and comply with local public regulations. No attempt must be made to tamper with the electrical parts of the unit. The hob is supplied with a 1,5 metre power cable without plug and is to be connected to an external relay with a contact separation off at least 3mm in each pole. The g
Summary of the content on the page No. 19
Check to see whether a fuse has by an alternative service organisation, blown. approved by the distributor. Only spare parts delivered by the distributor may Check to see whether the relay is be used. Spare parts and service are the switched off. domain of our service network. If the problem is not with the fuse or relay, do not attempt to correct it yourself. Instead, contact our service network - all repairs must be performed by our service personne
Summary of the content on the page No. 20
approximately 5 minutes on step 12, Use of the grill. the meat will get heat from the water The numbers 1-12 are temperature and become juicy. When fat drips settings. From 1-11 the heating is down into the water it will cool off so increased an regulated automatically. quickly that it cannot be ignited. Keep On 12, full power is achieved and the an eye on the water and refill as heating elements are glowing. This necessary. step is suitable for heating up the grill
