AEG BES355010M user manual

To turn off the AEG BES355010M oven, you can follow these steps:
1. Locate the control panel on the oven.
. Look for the power switch or button on the control panel.
3. Press and hold down the power switch or button for a few seconds until the oven turns off completely.
4. Alternatively, you can also try turning off the oven by pressing and holding down the "Cancel" or "Off" button on the control panel until the oven shuts down.
If none of these steps work, you can refer to the instruction manual or contact AEG customer support for further assistance.

To determine when your AEG oven is preheated, follow these steps:
1. Turn on your AEG oven and set the desired temperature for preheating.
2. As the oven heats up, an indicator light will typically illuminate to notify you that the oven is in the preheating mode. On the AEG BES355010M model, this indicator light is located on the oven control panel.
3. Keep an eye on the oven's temperature display, which shows the real-time temperature. As the oven continues to heat up, you'll notice the temperature gradually rising.
4. Once the oven reaches the desired preheating temperature, the indicator light will typically turn off to signal that the oven is preheated. Simultaneously, the temperature display will show the preheating temperature you selected or have a visual indicator that reflects that the oven is fully preheated.
5. Some AEG ovens may also emit an audible signal, such as a beep or chime, to further indicate that the preheating process is complete.
Remember to consult the specific instructions provided in your AEG oven's user manual, as the preheating process may vary slightly depending on the model.