Bissell SPOTLIFTER-POWERBRUSH-1716 user manual

User manual for the device Bissell SPOTLIFTER-POWERBRUSH-1716

Device: Bissell SPOTLIFTER-POWERBRUSH-1716
Category: Uncategorized
Manufacturer: Bissell
Size: 1.82 MB
Added : 7/25/2023
Number of pages: 12
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Bissell SPOTLIFTER-POWERBRUSH-1716. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Bissell SPOTLIFTER-POWERBRUSH-1716.

For your convenience

If looking through the Bissell SPOTLIFTER-POWERBRUSH-1716 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Bissell SPOTLIFTER-POWERBRUSH-1716 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Bissell SPOTLIFTER-POWERBRUSH-1716 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Bissell SPOTLIFTER-POWERBRUSH-1716 Manual - Online PDF
Advertisement
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Bissell SPOTLIFTER-POWERBRUSH-1716 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Bissell SPOTLIFTER-POWERBRUSH-1716. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Bissell SPOTLIFTER-POWERBRUSH-1716 - Support and Troubleshooting

How long does it take to charge a Bissell SpotLifter 2x?

The Bissell SpotLifter 2x typically takes around 4 to 5 hours to fully charge. It is recommended to charge the device for the specified amount of time before using it to ensure optimal performance.

How do you use a Bissell SpotLifter PowerBrush 1716?

Here's how to use the Bissell SpotLifter PowerBrush 1716:
1. Preparation: Before using the SpotLifter PowerBrush, make sure the machine is fully charged. This can take up to 12 hours for a full charge. You can check the status of the charge by looking at the charging light indicator on the handle.
2. Filling the Water Tank: Remove the clean water/solution tank by lifting it up and out of the unit. Unscrew the cap and fill the tank with hot tap water up to the fill line. Then add BISSELL cleaning formula to the formula fill line. Put the cap back on and securely place the tank onto the unit.
3. Use: Press the power switch to turn on the SpotLifter PowerBrush. Hold the SpotLifter over the spot you want to clean and press the spray trigger to apply the cleaning solution.
4. Brushing: Use the cleaning brush to scrub the area gently, allowing the brush to agitate and loosen the dirt.
5. Suction: Release the spray trigger, and move the SpotLifter back and forth over the area to suck up the loosened dirt and the cleaning solution. Repeat the process until the stain is gone.
6. Emptying soiled water: After usage, it is necessary to empty the collection tank. Twist and lift the collection tank handle to remove it from the machine. Empty it and rinse it thoroughly with clean water. Dry and place it back into the machine.
Important: Always ensure the tanks are properly installed before using the machine, and remember that with a cordless device like the SpotLifter PowerBrush, longer run time can be achieved by spraying less solution during use. It is recommended that you always discretely test a small area for colorfastness.

How do you fill Bissell spot lifter?

To fill the Bissell SpotLifter PowerBrush 1716 with solution, follow these steps:
1. Remove the dirty water tank by lifting it straight up and away from the unit.
. Twist the dirty water tank cap counterclockwise to remove it.
3. Fill the clean water tank with hot tap water. Be careful not to overfill it, as it has a fill line indicator on the side.
4. Add Bissell cleaning solution to the clean water tank. Follow the instructions on the bottle for the recommended amount.
5. Replace the clean water tank cap by twisting it clockwise until it is securely closed.
6. Insert the dirty water tank back into the unit, making sure it is properly aligned and pushed all the way in until it clicks into place.
Your Bissell SpotLifter PowerBrush 1716 is now filled and ready to use. Just power it on and you can start cleaning your carpets or other surfaces.

How do you use an old Bissell spot lifter?

To use an old Bissell Spotlifter Powerbrush 1716, you can follow these steps:
1. Fill the clean water tank with hot tap water. Do not use boiling water or chemicals in the tank.
. Add Bissell Spot and Stain formula into the tank following the instructions on the bottle. This step is optional, but using a cleaning solution can provide better results.
3. Attach the power cord to an electrical outlet and ensure it is plugged in securely.
4. Turn the power switch to the "On" position.
5. Hold the Spotlifter Powerbrush above the area you want to clean and squeeze the trigger to apply the cleaning solution onto the spot or stain.
6. Using the brush attachment, scrub the area in a back-and-forth or circular motion. Apply gentle pressure, avoiding excessive force to prevent damage.
7. Release the trigger and allow the cleaning solution to sit on the stain for a minute or two.
8. Push and hold the vacuum release button located on the top front of the Spotlifter to activate suction.
9. Slowly move the Spotlifter back and forth over the wet area to remove the cleaning solution and dirt. The dirty water will be sucked into the dirty water tank.
10. Continue the process until you have removed as much of the cleaning solution and dirt as possible. For heavily soiled areas, you may need to repeat the process.
11. Once finished, empty the dirty water tank and rinse it out thoroughly.
12. Clean the brush attachment and remove any hair or debris that may have accumulated.
13. Allow all parts to dry before storing the Spotlifter Powerbrush for future use.
It's important to note that these instructions are intended for the Bissell Spotlifter Powerbrush 1716 model. If you have a different model or an old version, the steps may vary slightly. Refer to the user manual specific to your model for detailed instructions.
Alternative user manuals
# User manual Category Download
1 Bissell ReadyClean Pet 3 53W15 Carpet Cleaner Instruction manual Uncategorized 0
2 Bissell Little Green 1653-4 User manual Uncategorized 0
3 Bissell STAIN EXPERT 6 CARPET CLEANER Instruction manual Uncategorized 0
4 Bissell BGU1937T Operating instructions Uncategorized 0
5 Bissell SPOTLIFTER-POWERBRUSH-1716 Guide Uncategorized 0
6 Bissell SPOTLIFTER-POWERBRUSH-1716 Guide Uncategorized 0
7 Bissell STAINPRO-6 User guide Uncategorized 0
8 Bissell TURBOCLEAN-POWERBRUSH-PET Guide Uncategorized 0
9 Bissell TURBOCLEAN-POWERBRUSH-PET Guide Uncategorized 0
10 Bissell STAINPRO-6 Guide Uncategorized 0
11 Bissell TURBOCLEAN-POWERBRUSH-PET Guide Uncategorized 0
12 Bissell SPOTCLEAN-PET-PRO Guide Uncategorized 0
13 Bissell SPOTCLEAN-PRO Guide Uncategorized 0
14 Bissell STAINPRO-6 User manual Uncategorized 0
15 Bissell SPOTCLEAN-PET-PRO Manual Uncategorized 0
16 BUSH 16GB MP3 Player Instruction manual Uncategorized 0
17 Sony HDR-AS15 Owner's manual Uncategorized 0
18 Electrolux EKK54506OW User manual Uncategorized 0
19 Panasonic SLJ910 Operating instructions Uncategorized 0
20 Sony NWZ WS613 Owner's manual Uncategorized 0