Brother MFC-L6900DW user manual

To print a configuration page on your Brother MFC-L6900DW printer, you can follow these steps:
1. Ensure that your Brother printer is turned on and connected to your computer or network.
2. On the printer's control panel, locate and press the "Menu" button.
3. Use the navigation keys (arrow keys) to scroll through the options and select "Network."
4. Once in the "Network" menu, use the arrow keys to navigate to the "Print LAN Details" option. Press the "OK" button to select it.
5. Now, scroll to the "Print" option and press "OK."
6. The configuration page will start to print. Ensure that you have paper loaded in the printer's tray.
The configuration page will contain information about your printer's network settings, IP address, and other important details.

The default password for Brother MFC-L6900DW is usually 'initpass'. However, please note that the password might have been changed by the administrator, so if 'initpass' does not work, you may need to contact the administrator or reset the password to gain access.

To get your Brother MFC-L6900DW scanner to work, follow these steps:
1. Ensure the Brother printer/scanner is properly connected to your computer through a USB cable or wired/wireless network connection.
2. Install the necessary Brother printer/scanner software on your computer. You may have received a CD with the printer, or you can visit the Brother support website to download the latest drivers and software specific to your printer model.
3. Once the software is installed, restart your computer to finalize the installation process.
4. Place the document you want to scan onto the scanner glass or into the automatic document feeder (ADF), depending on your preference.
5. On your computer, open the scanning software that was installed with the Brother printer/scanner. Often, this software is called Brother ControlCenter or Brother Solutions Center.
6. From the software, choose the scanning option that matches your requirements, such as scanning to a file, email, or directly to a specific application.
7. Select the scanner device (Brother MFC-L6900DW) if prompted.
8. Adjust any necessary scan settings, such as resolution, color mode, or file format, according to your preference.
9. Preview the scanned image to ensure it meets your expectations and make any necessary adjustments.
10. Start the scan process and wait for it to complete.
11. Once the scan is finished, you can save the scanned image to your desired location, email it, or use it as needed.
Note: Make sure the printer/scanner is turned on and connected properly before attempting to scan. If you encounter any issues, consult the Brother support website or user manual for further troubleshooting instructions specific to your printer model.

To scan from your Brother MFC-L2710DW printer to email, you can follow the steps below:
1. Ensure that your Brother printer is connected to your computer and is turned on.
. Make sure your computer is connected to the same network as the printer.
3. Open the ControlCenter4 program on your computer. If you do not have it installed, you can download it from the Brother Support website.
4. In the ControlCenter4 program, click on the "Configuration" tab.
5. Under the "Scan" section, select the "File" option to scan to email as a file format.
6. Configure the scan settings such as file type (PDF, JPEG, etc.), resolution, and color mode according to your preference.
7. On the left-hand side, click on the "Scan" option.
8. Select the "Email" option from the drop-down menu.
9. Fill in the recipient's email address in the "To" field.
10. Configure any additional scan settings if required, such as changing the file name or setting up a scan profile.
11. Click on the "OK" or "Scan" button to start the scanning process.
After the scan is complete, the scanned document will be attached to a new email message in your default email client. You can simply add a subject, message, and send the email to the recipient.
Please note that the steps mentioned above are for Windows users. The process may differ slightly for Mac users, but you can still use the ControlCenter4 software provided by Brother to accomplish the same task.