Conair GS59 user manual

Your Conair GS59 steamer might be spitting water due to a few possible reasons:
1. Overfilled water tank: The water tank might be full beyond its maximum limit. This can cause the steamer to spit water.
2. Inappropriate water temperature: If the steamer is not heated enough before the use, it may spit water. You should wait for the indicator light to go off before using the steamer.
3. Clogged steamer: If the steamer has not been cleaned for quite some time, there could be mineral deposits leading to a clog. This can cause the steamer to spit water out.
4. Excessive shaking: If you are vigorously shaking the steamer during use, it might cause water to spit out.
To fix this problem, avoid overfilling the tank or shaking the appliance too much during use. Also, ensure that the steamer is fully heated before you start using it. Additionally, maintain periodic cleaning to prevent mineral deposits from clogging the steamer.

Your Conair GS59 clothes steamer might not be producing steam due to several reasons:
1. No Water: Check to make sure the water tank is filled. The steamer can't produce steam without water.
2. Power Issues: Ensure that the steamer is plugged into a working outlet and the power switch is turned on.
3. Calcium Buildup: If your steamer is filled and the power is fine, the issue could be calcium buildup within the steamer. Over time, particularly if you've been using hard water in your steamer, it can get clogged by mineral deposits. You may need to clean or decalcify your steamer following the instructions in your user manual.
4. Heat Up Time: Make sure you have given the steamer sufficient time to heat the water and build up steam. It usually takes a few minutes.
5. Faulty Heating Element: If there's water and power to the steamer but it's absolutely not producing steam, the heating element (which heats the water to create steam) may be faulty or broken. In this case, you may need to contact Conair for repair, part replacement or purchasing a new unit.
6. Parts Not Assembled Correctly: Ensure that all parts such as the nozzle and hose are correctly attached as they can prevent the steamer from working if they're not properly installed.
Always refer to your user manual or contact customer service for troubleshooting instructions specific to your model.