Doro PHONEEASY-612 user manual

On a Doro phone, the A and B buttons are programmable keys that can be assigned specific functions according to the user's preferences. These buttons can be customized to perform various tasks such as speed dialing, accessing commonly used features or applications, or even emergency functions. The specific functions assigned to the A and B buttons can vary depending on the model of the Doro phone.

There could be several reasons why you are unable to receive calls on your Doro PhoneEasy 612. Here are some troubleshooting tips to help you resolve this issue:
1. Ensure that your phone is not in airplane mode, as this will prevent any incoming or outgoing calls.
2. Check your signal strength by looking at the signal bars on your phone's display. If you have low or no signal, try moving to an area with better reception.
3. Make sure that call barring or call forwarding settings are not activated on your phone. These features can prevent incoming calls.
4. Verify that your phone's ringer volume is not set to silent or turned all the way down. Adjust the volume settings to an appropriate level.
5. Check if your phone has accidentally been set to "Do Not Disturb" mode. This mode can silence all incoming calls and notifications. Disable this feature if it is activated.
6. Ensure that your phone's software is up to date. You can check for any available software updates in the phone's settings menu.
7. If none of these steps work, try removing the battery from your phone and then reinserting it after a few seconds. This can sometimes resolve temporary software glitches.
If none of these troubleshooting steps resolve the issue, contacting your mobile service provider or the customer support for your Doro PhoneEasy 612 would be advisable. They can provide further assistance and troubleshoot the problem specific to your device and network.

To turn on an old Doro flip phone, follow these steps:
1. Locate the power button: It is typically located on the side or the top of the phone. In some models, it may also be on the front or back of the phone.
2. Press and hold the power button: Press and hold the power button until the phone vibrates, lights up, or shows a manufacturer logo on the screen. This signifies that the phone is turning on.
3. Release the power button: Once the phone is turned on, release the power button.
4. Wait for the phone to start: Give the phone a few moments to fully boot up. The time taken may vary depending on the model and the age of the phone.
5. Phone is on: Once the phone has finished turning on and loaded the home screen, it is ready to use.
If the phone doesn't turn on after following these steps, ensure that the battery is charged. If the battery is dead, connect the phone to a charger and wait for it to have enough power before attempting to turn it on again.

The Doro PhoneEasy 612 uses a standard-sized SIM card.