Canon EOS 620-650 user manual

User manual for the device Canon EOS 620-650

Device: Canon EOS 620-650
Category: Digital Camera
Manufacturer: Canon
Size: 7.14 MB
Added : 8/27/2013
Number of pages: 43
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Canon EOS 620-650. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Canon EOS 620-650.

For your convenience

If looking through the Canon EOS 620-650 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Canon EOS 620-650 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Canon EOS 620-650 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Canon EOS 620-650 User manual - Online PDF

Explore the detailed user manual for Canon remarkable creation, Model EOS 620-650. Gain valuable insights and instructions to maximize your device's capabilities and optimize your user experience. Uncover the full potential of your Canon EOS 620-650 device through this comprehensive user manual, offering step-by-step guidance and expert tips for effortless operation and enjoyment.

Advertisement
« Page 1 of 43 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Canon EOS 620-650 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Canon EOS 620-650. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Canon EOS 620-650
Camera Manual
POSTED 12-5-02
This is the full text and images from the manual. This may take 3 full minutes for all images to appear. If they
do not all appear. Try clicking the browser "refresh" or "reload button".
This camera manual library is for reference and historical purposes, all rights reserved.
This page is copyright© by , M. Butkus, N.J.
This page may not be sold or distributed without the expressed permission of the producer
I have no connection with a

Summary of the content on the page No. 2

Quartz Date Back E that imprints data, and the Technical Back E that memorizes exposure control data. For a full understanding of the EOS 620/650, please read this instruction booklet carefully before using the camera. While reading these instructions unfold the front and back flaps of this booklet for easy reference to the camera s parts. EOS" is derived from "Electro-Optical System" originating from the completely electronic data communication between the camera and lens. Further, "EO

Summary of the content on the page No. 3

Table of Contents Preliminary Preparations 1. Attaching the Lens 6 2. Loading the Battery 8 3. Checking the Battery 9 4. Loading the Film 10 [Automatic Film Speed Setting] 12 Basic Steps 1. Setting the Main Switch to the "Full Auto" Position 14 2. Holding the Camera 15 3. AF Focusing 16 4. Exposure 17 [Display Panel Illumination] 18 5. Automatic Film Rewind 19 [Rewinding Mid-Roll] 20 Making the Most of Your EOS 620/650 1. Main Switch Functions 22 2. Setting the AF Mod

Summary of the content on the page No. 4

1. Attaching the Lens 1) Turn the rear lens cap in the direction of the arrow until it stops and remove it from the lens. · To attach the rear lens cap, align its ''O'' mark with the red dot on the lens. Then lightly push it in and turn it clockwise until it stops. 2) Turn the body cap counterclockwise and remove it. · To attach the body cap, align its "o" mark with the camera's red dot, then turn the cap clockwise. 3) To mount the lens, align the lens mount positioning point with

Summary of the content on the page No. 5

1) Remove the grip with a coin or similar object. 2) As shown in the photo, load the battery so that its terminals face in the direction of the camera. Make sure the battery is pushed in all the way until it is locked by the orange lever 3) Replace the grip securely. · When replacing the battery, first push the orange lever upward to remove the dead battery. · When using a tripod, dismount t the camera before replacing the battery. 3. Checking the Battery 1 ) Set the main swit

Summary of the content on the page No. 6

2) Open the switch cover on the back of the camera and press the battery check button( ). Battery power shows in the display panel. 4. Loading the Film 1) To open the back cover, push the back cover latch down while pressing the back cover lock button 2) Insert the upper-flat end of the film cartridge into the film chamber first. The film-load check mark (OIL) appears in the display panel. 3) Pull the film leader across the shutter curtain until its tip is aligned with the orange

Summary of the content on the page No. 7

4) Make sure that the film has no slack and that its perforations are properly engaged with the sprocket teeth. 5) Close the back cover. The camera advances the film automatically and stops when "1" appears in the frame counter in the display panel. 6) During film advance, the film transport bars will appear at the bottom of the display panel moving in sequence from left to right. However, if the film does not advance correctly, the bars blink after the camera has stopped and th

Summary of the content on the page No. 8

Basic Steps 1. Setting the Main Switch to the "Full Auto" Position 1) Slide the lens focus switch to "AF" 2) Set the camera's main switch to the "Full Auto" position (the green " 0 " mark). The following displays will appear: ONE SHOT: One of the AF modes. P (Program): One of the AE modes. S (Single): One of the film winding modes. For further details on the above displays, please refer to pp. 24, 26 and 27. 2. Holding the Camera Your pictures will not be sharp if the

Summary of the content on the page No. 9

1) Center the AF from ('[ ]" mark) over the main subject. Do not touch the lens' moving parts during AF focusing. 2) Press the shutter button halfway and automatic focus (AF) starts. When correct focus is obtained, the green AF in-focus indicator lights up in the viewfinder and the AF focus signal (short electronic beeper tone) sounds. · Original focus remains locked, even if the subject or focusing distance changes as long as the shutter button is held halfway. · When AF is impossible

Summary of the content on the page No. 10

5. Automatic Film Rewind The film automatically rewinds at the end of the roll. 1) During rewind the film transport bars move in 2) Film rewind stops automatically when the film has sequence from right to left to indicate the function in been completely rewound. Open the back cover when progress while the frame counter counts in descending the film-load check mark(~) blinks. order. Press the film rewind button (~) to rewind before the 3) Remove the film cartridge. roll ends

Summary of the content on the page No. 11

((*)) (ON): In addition to being the same ON position [ ] (ON): Full auto position. The setting will be as as "A", the electronic beeper tone sounds in the follows automatically regardless of the mode. 1) AF following cases; mode - ONE SHOT 2) AE mode - P (Program) 3) Film 1) When correct focus is obtained. - AF focus signal winding mode - S (Single) 4) Electronic beeper tone (short beeper tone) 2) When the automatically-set shutter speed is too slow -short; AF focus signal to hand-

Summary of the content on the page No. 12

3) Turn the electronic input dial to select either "ONE SHOT" or "SERVO" 3. Setting the Film Winding Mode This camera has two automatic film winding modes. S: Single exposure. The film automatically advances to the next frame upon shutter release. C: Continuous exposure. Keep pressing the shutter button and the film winds continuously at the maximum speed of approximately three frames per second. **image missing: Self-timer position. (see p. 58) To set the film winding mode, fo

Summary of the content on the page No. 13

(1 ) Program AE [Purpose] The camera automatically sets shutter speed/ aperture combinations according to subject brightness. This mode particularly suits first-time SLR users or those who prefer to concentrate on picture composition or candid snapshots. [SETTING] While pressing the shooting mode selector, turn the electronic input dial until "P" appears in the display panel. When the automatically-set shutter speed is too slow to hand-hold, the camera will sound a long be

Summary of the content on the page No. 14

[PURPOSE] With the EOS 620, you can change the automatically-set shutter speed/aperture combinations of the program AE mode. This function is particularly useful when you need a specific shutter speed or aperture while shooting in the program AE mode. Be sure to set the main switch to the "A" or "(' ')" position. (At the green " [ ] " position, the program shift function cannot be used. [SETTING] Simply turn the electronic input dial until the desired shutter speed or aperture v

Summary of the content on the page No. 15

(3) Shutter-Priority AE [PURPOSE] In this mode the shutter speed is manually set and the camera automatically chooses the correct aperture for the lighting conditions. This mode is best for taking pictures of moving subjects by con trolling the shutter speed. Faster shutter speeds freeze subject motion while slower shutter speeds can produce artistic blur effects. [SETTING] 1) While pressing the shooting mode selector, turn the electronic input dial until "TV" appears in the displa

Summary of the content on the page No. 16

(4) Aperture-Priority AE [Purpose] In this mode, the aperture is set manually and the camera chooses correct shutter speed for the blighting conditions (the opposite of shutter-priority AE). Use this mode for portraits, landscapes and still-life photography where depth of field is an important factor. (see p. 36) [SETTING] 1) While pressing the shooting mode selector, turn the electronic input dial until "Av" appears in the display panel. 2) Remove your finger from the shooting

Summary of the content on the page No. 17

Depth of Field When your subject is in focus, there is a certain area in front of it and behind it which will also be in focus. This range of sharpness is called "depth of field". Depth of field has the following characteristics: 1) The smaller the aperture, the wider the depth of field and vice versa. 2) The shorter the lens focal length is, the greater the depth of field, provided that aperture and shooting distance are the same. 3) The farther the shooting distance, the greater t

Summary of the content on the page No. 18

(5) Depth of Field AE (EOS 650 Only) [PURPOSE] This mode makes everything from a certain point in the foreground to the background in focus, using both the AF function and the depth of field. The camera automatically sets the correct aperture value and corresponding shutter speed for the lighting conditions. Use this mode for landscapes and large-group commemorative shots. [SETTING] 1) While pressing the shooting mode selector, turn the electronic input dial until "DEPTH" ap

Summary of the content on the page No. 19

8) Gently press the shutter button completely to take the picture. When shooting continuously, it is not necessary to focus the same subject again provided you keep pressing the shutter button halfway after exposure. (To clear, press the shooting mode selector after you remove your finger from the shutter button.) [VIEW FINDER INFORMATION] Correct exposure- Exposure will be correct if continuously lit values display. Underexposure - Both the shutter speed of 30" and the lens

Summary of the content on the page No. 20

· When you try to focus extremely near and far points the automatically-set shutter speed will be comparatively slower and the long beeper tone will sound to warn you of camera-shake. Hold the camera steady or use a tripod. · When using a zoom lens, do not change the lens focal length after focusing the first point Always be sure to compose the picture first. · It is advisable to use a wide-angle lens to obtain maximum depth-of-field effect. (A lens focal length of more than 200mm is n


Alternative user manuals
# User manual Category Download
1 Canon 17 User manual Digital Camera 30
2 Canon 110ED20 User manual Digital Camera 12
3 Canon 1100HS User manual Digital Camera 12
4 Canon 1000 User manual Digital Camera 30
5 Canon 1N RS User manual Digital Camera 62
6 Canon 1000F User manual Digital Camera 63
7 Canon 1000D User manual Digital Camera 325
8 Canon 1V-HS User manual Digital Camera 15
9 Canon 2.2 User manual Digital Camera 1
10 Canon 2232B002AA User manual Digital Camera 0
11 Canon 1N User manual Digital Camera 17
12 Canon 1774B001 User manual Digital Camera 1
13 Canon 250 User manual Digital Camera 7
14 Canon 240 HS User manual Digital Camera 18
15 Canon 3000 QD User manual Digital Camera 7
16 Sony 3D Bloggie MHS-FS3 User manual Digital Camera 35
17 Sony 838 MHz to 862 MHz User manual Digital Camera 7
18 Sony 4-133-499-11 (1) User manual Digital Camera 15
19 Sony 4-187-045-11(1) User manual Digital Camera 1
20 Sony 4-132-058-11(1) User manual Digital Camera 5