Canon PowerShot S110 user manual

Summary of the content on the page No. 1

DIGITAL IXUS v/ PowerShot S110 Firmware Update
Equipment required for firmware update
TM
You will need a properly formatted CompactFlash (CF) card of 2MB or greater capacity for
the firmware update.
Using fully charged NB-1L battery pack.
For users who do not have the equipment necessary for firmware update
Please contact :
The Canon Customer Support Center mentioned in the : For USA and all other regions,
Camera User Guide except Europe
The Local Canon Distributor listed in the Canon Europea

Summary of the content on the page No. 2

Verify the file for firmware updating In order to download firmware from Canon's web site, you will need the serial number that is written on the bottom of your DIGITAL IXUS v/ PowerShot S110 camera. Please check the number carefully before entering it on the download page. Download the firmware update file that is suited to your computer's operating system. The file is a self-extracting compressed archive. Double-click it for extraction. After downloading and decompressing the file, verify t

Summary of the content on the page No. 3

(A) IF YOU HAVE A CF CARD READER, PC CARD READER* OR NOTEBOOK TYPE PC* WITH A PC CARD SLOT 1. Insert the formatted CF card into the card reader. 2. Copy the "IXY200.FIR" file from the downloaded data to the CF card. * If you use a PC card reader or a notebook type PC with a PC card slot, a CF- to-PC card adapter is required. (B) IF YOU DO NOT HAVE ANY OF THE ABOVE CARD READING DEVICES 1. Insert the CF card into the DIGITAL IXUS v/ PowerShot S110, and connect it to the PC with an USB cable. 2.

Summary of the content on the page No. 4

PROCEDURE 2 : Start the camera with Replay mode 2-1 Ensure the camera is powered by fully charged NB-1L battery pack. 2-2 Insert the CF card in the camera. 2-3 Start the camera with (Replay) mode.

Summary of the content on the page No. 5

PROCEDURE 3 : Select "Firm Update" from the menu Press the "MENU" button to display the Play menu, and then select "Firm Update" from the menu. If the "Firm Update" option is not available from the menu, then the "IXY200.FIR" file was not copied correctly to the CF card. If this is the case then return to PROCEDURE 1 after formatting CF card. Press "SET" button, and then select "OK". Note: Some DIGITAL IXUS v/ PowerShot S110 cameras have already been updated to firmware version 1.0.0.2 prior

Summary of the content on the page No. 6

PROCEDURE 4 : Press the "SET" button to start Press "SET" button to start writing the firmware update. Precautions : If you wait more than 5 minutes between Procedures 3 and 4, the camera will cancel the menu and turn off using its Auto Power Off function when you press the MENU button. In this case the firmware is not updated. To update the firmware please return to PROCEDURE 2. Once the update starts, the indicator LED will cycle from ORANGE to GREEN. The message shown here will be displaye

Summary of the content on the page No. 7

If the indicator LED keeps flashing for over 5 minutes while updating the firmware There is a possibility that the firmware updating procedure has failed. Please remove the battery from the camera to stop it. Please consult : The Canon Customer Support Center mentioned in the : For USA and all other regions, Camera User Guide except Europe The Local Canon Distributor listed in the Canon European : For Europe Warranty System List (EWS) Verifying the firmware update You'll need to connect your D