Summary of the content on the page No. 1
User’s Guide
User’s Guide
www.concord-camera.com
Summary of the content on the page No. 2
ENGLISH CONGRATULATIONS Congratulations on the purchase of your new camera. Your camera has been carefully engineered and manufactured to give you dependable operation. Read this manual before operating the camera to become more familiar with it. This manual has been written and formatted with depth and detail so that you can easily follow the instructions to maximize the features of your camera. 1
Summary of the content on the page No. 3
CAMERA OVERVIEW CAMERA OVERVIEW Top/Front 15 2 6 1. Flash Sensor 7. Viewfinder 3 2. 2-step Shutter Button 8. Self-Timer/Red-Eye 7 3. Flash Reduction LED 8 4. On/Off switch 9. Mini-USB port 4 5. Lens/Lens Cover 10.TV-Out port 9 6. Microphone 11.Speaker 10 11 Bottom/Back 12. Flash Ready LED 22. Battery 19 13. Viewfinder Compartment 12 20 14. Diopter wheel 23. Battery/Memory 13 21 15. Auto-Focus LED Card Door 14 16. LCD 24. Wrist Strap Holder 15 22 17. Tripod Socket 25. Joystick/OK 23 18. Res
Summary of the content on the page No. 4
Table of Contents CAMERA OVERVIEW ..............................................................................................................................2 Top/Front ..........................................................................................................................................2 Bottom/Back......................................................................................................................................2 LCD ICONS...............................
Summary of the content on the page No. 5
CUSTOMIZING THE CAMERA SETTINGS............................................................................................33 Setup Menu and Features ..............................................................................................................35 Setting the Auto Off Time................................................................................................................36 Setting the Language.............................................................................
Summary of the content on the page No. 6
GETTING STARTED GETTING STARTED Package Contents Concord Eye-Q 3340z Mini-USB Cable TV Out Cable Users Guide/Quick Start Guide/Warranty Card Camera Case Wrist Strap Overnight Battery Charger and 4x AA Rechargeable Batteries CD-ROM (for Windows users only) USB Mass Storage Driver ArcSoft PhotoImpression 2000 Adobe Acrobat Reader 5.1 Microsoft DirectX 9 View User's Guide (Multilingual) Visit Concord Support Web Site Camera Features 3.1 Megapixels, 2048 x 1536 Reso
Summary of the content on the page No. 7
GETTING STARTED Attaching the Wrist Strap Please attach the wrist strap to prevent dropping the camera. 2 1 3 Charging Rechargeable Batteries NOTE! : The supplied rechargeable Ni-MH batteries are not charged when you receive them. Charge them before loading into the camera. fig.1.1 fig.1.2 (correct loading way 1) fig.1.3 (correct loading way 2) How to Charge the Rechargeable Batteries: 1. Open the chargers battery door by pressing on the OPEN area and sliding to the direction of arrow. (fig. 1.
Summary of the content on the page No. 8
GETTING STARTED 6. After the batteries are fully charged, unplug the charger from AC outlet first, and then remove the batteries. (fig. 1.8 -1.10) fig.1.8 fig.1.9 fig.1.10 Important Tips 1. This charger is designed for indoor use only. Do not expose it to rain or snow. 2. Do not touch the charger with wet hands, especially while plugging or unplugging the charger to or from AC outlet. 3. Charge only the suggested type of rechargeable batteries. Other types of batteries may burst causing person
Summary of the content on the page No. 9
GETTING STARTED Loading the Batteries fig.1.1 fig.1.2 fig.1.3 The camera can use 2x AA alkaline, lithium or Ni-MH rechargeable batteries to operate. 1. Open the Battery/Memory Card door. (fig.1.1) Press the Battery/Memory Card door, slide the door down and lift it open. 2. Insert the batteries according to the polarity indicators on the inner side of theBattery/Memory Card door. (fig.1.2) 3. Shut the Battery/Memory Card door and press it up to close it securely. (fig.1.3) Checking the Battery
Summary of the content on the page No. 10
GETTING STARTED Internal Memory/Inserting the Memory Card Internal Memory The camera is equipped with 16MB of internal memory, which can be used right away. Status Memory in Use Memory card is not inserted Internal Memory Memory card is inserted Memory Card NOTE!: When the memory card is inserted, the images and video clips stored in the internal memory will be transferred automatically onto the memory card. Please insert a memory card with 16MB or greater of available memory. Inserting the Memo
Summary of the content on the page No. 11
GETTING STARTED TURNING THE CAMERA ON AND OFF The On/Off Switch is located in the front of the camera. 1. Slide the On/Off Switch down to power the camera on. (fig.1.1) The lens cover will open. The LCD will turn on automatically 2. To turn the camera off, slide the On/Off Switch upwards. (fig.1.2) fig.1.1 Camera On Note: The camera will automatically power off after 30 seconds of inactivity even the ON/OFF switch is in the "ON" position. Press the shutter button to power the camera back o
Summary of the content on the page No. 12
1 1 1 GETTING STARTED Setting the Date ADJUST DATE ADJUST DATE ADJUST DATE 01 Ú 01 Ú 2002 01 Ú 01 Ú 2002 01 Ú 02 Ú 2002 RETURN OK SET RETURN OK SET RETURN OK SET 1. Press the joystick to highlight the month, day or year. The selection will blink when it is highlighted. 2. Press the joystick to change the number in the blinking position until you reach the desired setting. 3. Press to set the date. OK Note: If the battery is removed or dead for more than 4 minutes
Summary of the content on the page No. 13
GETTING STARTED Turning the LCD On and Off The camera has a 1.5 LCD which can frame subjects for image and video clip capture, review stored images and video clips and to display the current camera settings. 2040 SD A AWB 07 ⁄ 04 ⁄ 2003 02:40 1. Use the ( ) button to toggle the LCD mode. The LCD mode changes each time the button is pressed as follows: Icons off LCD off LCD on with icons Note: In order to save battery power, you may turn off the LCD display. SETTING THE CAMERAS OP
Summary of the content on the page No. 14
TAKING PICTURES TAKING A PICTURE WITH THE VIEWFINDER Diopter Adjusting Taking a picture with the viewfinder: 1. Turn the camera on. 2. Set the camera to ( ) Camera Mode. The LCD can be switched off to conserve battery power by OK pressing the ( ) button. 3. Frame the subject in the viewfinder. If the subject appears blurry, adjust the viewfinder focus by turning fig.1.1 the diopter wheel. 4. Press the shutter button half-way to activate the auto-focus until the green AF LED stops
Summary of the content on the page No. 15
TAKING PICTURES TAKING A PICTURE WITH THE LCD SINGLE SHOT 2048 0000 0000 CAMERA MODE 0000 Capture Mode + Q Quality Setup + Image Size A Digital Zoom AWB + S Scenes Select RETURN OK SET 07 ⁄ 04 ⁄ 2003 02:40 RETURN SELECT Taking a picture with the LCD: 1. Set the camera to ( ) camera mode. 2. Frame the subject in the LCD. 3. Press the shutter button half-way to activate the auto-focus lock until the OK green AF LED stops blinking. (For more information on Focus Lock, please go to p.14)
Summary of the content on the page No. 16
TAKING PICTURES SETTING THE FLASH 2048 0000 0000 0000 2048 0000 0000 0000 OK A A AWB AWB 07 ⁄ 04 ⁄ 2003 02:40 07 ⁄ 04 ⁄ 2003 02:40 How to set the flash: 1. Press the Flash button next to the LCD repeatedly until the desired mode appears on the LCD. Flash Mode Description Auto Flash The camera judges if a flash is required. If the environment is too dark, the flash will A fire. A Red-Eye Use this mode to significantly reduce the occurrence of red- eye in flash photography. The camera will aut
Summary of the content on the page No. 17
TAKING PICTURES TAKING A PICTURE WITH DIGITAL ZOOM The 4x digital zoom combined with the 3x optical zoom can give up to 12x magnification to your pictures. 2048 0000 0000 2048 0000 0000 0000 2048 0000 0000 A A A AWB AWB AWB 07 ⁄ 04 ⁄ 2003 02:40 07 ⁄ 04 ⁄ 2003 02:40 07 ⁄ 04 ⁄ 2003 02:40 How to use digital zoom: 1. At the maximum optical zoom level, continue to press the joystick until the digital zoom is activated. There will be a short delay before the digital zoom is activated. The
Summary of the content on the page No. 18
TAKING PICTURES USING THE MAIN MENU IN CAMERA MODE SINGLE SHOT + + + RETURN SET OK SELF-TIMER+MACRO + + CAMERA MODE Capture Mode Q Quality Setup RETURN OK SET Q QUALITY SETUP Image Size Fine Digital Zoom Normal S Scenes Select Economy RETURN SELECT RETURN OK SET RESOLUTION 2048 x 1536 1600 x 1200 1280 x 960 640 x 480 DIGITAL ZOOM RETURN OK SET ON OFF RETURN OK SET S SCENES SELECT OFF Party Indoor Beach Snow Sunset Night Landscape RETURN OK SET S SCENES SELECT Fireworks Night Portrai
Summary of the content on the page No. 19
TAKING PICTURES USING THE MAIN MENU IN CAMERA MODE Follow the steps below to set the advanced shooting options in the camera through the Main Menu. Using the ( ) Main Menu: 1. Turn the camera on. 2. Set the mode dial to ( ). 3. Press MENU to display the main menu. 4. Press the joystick until the desired option is highlighted. 5. Press the joystick to enter the submenu. 6. Press the joystick in the submenu to toggle between the options. 7. Press to mak
Summary of the content on the page No. 20
TAKING PICTURES SELF-TIMER SINGLE+SELF-TIMER CAMERA MODE 2048 0000 Capture Mode + Q Quality Setup + Image Size A Digital Zoom + AWB S Scenes Select RETURN OK SET RETURN SELECT 07 ⁄ 04 ⁄ 2003 02:40 How to use self-timer: 1. In ( ) Camera Mode, press MENU to display the main menu. 2. Press the joystick to enter capture mode. 3. Press the joystick to highlight: ( ) Single Shot with Self-timer ( ) Continuous Shot with Self-timer OR ( ) Self-timer
