Clover Electronics HDC553 user manual

Summary of the content on the page No. 1

INSTRUCTION
MANUAL




DAY/NIGHT LONG RANGE
VARI-FOCAL COLOR CAMERA


MODEL HDC553























Copyright © 2009 Clover Electronics U.S.A. All Rights Reserved.

Summary of the content on the page No. 2

PRECAUTIONS • To avoid electrical shock, do not open the case of this product. • Do not stamp fingerprints on the window for lens. • Operate this product using only the supplied AC Power supply. • Do not overload electrical outlets or extension cords; this can result in fire or electric shock. • Keep this product away from strong magnetic fields. • Do not expose this product in direct sunlight or strong reflected rays. • Refer servicing to qualified personnel only. • Do not change o

Summary of the content on the page No. 3

5. Loosen the locking screw⑧ with the provided hex-head wrench and turn the camera clockwise or counter-clockwise to upright images on the screen and turn it clockwise to secure. 6. If necessary, change the settings to get the best images depending on your application by using the button on the bottom of the camera. - Get rid of the cap⑨ for the OSD button by turning counter-clockwise and then change the settings (refer to the included instruction manual for OSD). - Turn the cap clock

Summary of the content on the page No. 4

HOW TO ADJUST ANGLE OF VIEW 1. Vari-focal lens① Easily changeable angle of view: 5 to 50mm 2. Remove the sun-visor② and turn the locking screws③ on the knob with the provided hex-head wrench counter-clockwise to make easier adjustment for angle of view. Do not stamp your fingerprint on the window, which may affect picture quality. 3. ∞↔N④ Turn this adjustment ring④ clockwise or counter-clockwise to set the focus. 4. T ↔W (Tele ↔ Wide) ⑤ Turn this adjustment ring⑤ cl

Summary of the content on the page No. 5

Note: ▪ Apply the provided AC Power supply only. ▪ The total length of cable must not exceed 200’ including extension cable. TROUBLE SHOOTING If the camera does not function properly, check the following points before contacting the service center. Troubles Remedies No video Check the AC adapter and video cable between the camera and a monitor The image on the screen is dark Check the brightness control on the monitor The image on the screen is dim Check if the

Summary of the content on the page No. 6

SPECIFICATIONS • Image sensor 1/3” SONY Super HAD CCD • Total pixels 811(H) x 508(V) • Effective Pixels 768(H) x 494(V) • Scanning system 2:1 Interlace • O.S.D Available • Backlight Off / HSBLC / BLC selectable • Resolution 550TV Lines(color),600TV Lines(B/W) • S/N (Y signal) 52dB (AGC Off, Weight O

Summary of the content on the page No. 7

HOW TO OBTAIN FACTORY SERVICE 1. Original purchaser must fill out a warranty card and mail it to the factory with model number, serial number and the date of purchase. 2. We will repair or replace, and return to the owner the system under this limited warranty. 3. Please pack the system carefully and securely using the original packing materials, th and send it prepaid and insured to: 13073 E. 166 St, Cerritos, CA 90703. 4. Please include a check for $25.00 to cover the cost of ret