Summary of the content on the page No. 1
Summary of the content on the page No. 2
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 1 ENGLISH CONGRATULATIONS Congratulations on the purchase of your new camera. Your camera has been carefully engineered and manufactured to give you dependable operation. Read this manual before operating the camera to become more familiar with it. This manual has been written and formatted with depth and detail so that you can easily follow the instructions to maximize the features of your camera. 1
Summary of the content on the page No. 3
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 2 Table of Contents Important Information......................................................................................4 Precautions ......................................................................................................5 Camera Features ..............................................................................................6 System Requirements .............................................................................
Summary of the content on the page No. 4
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 3 3. Review Mode Enlargement ..................................................................................................35 Viewing Video Clips ......................................................................................35 Main Menu ....................................................................................................36 Delete ...............................................................................................
Summary of the content on the page No. 5
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 4 IMPORTANT INFORMATION FCC INFORMATION FCC WARNING: This equipment meets the limits for a Class B digital device, pursuant to Part 15 of FCC rules. Only the cable supplied with the camera should be used. Operation with other cables is likely to result in interference to radio and TV reception and could void the user’s authorization to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following tw
Summary of the content on the page No. 6
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 5 VCCI INFORMATION This is a Class B product, to be used in a domestic environment, based on the Technical Requirement of the Voluntary Control Council for Interference (VCCI) from Information Technology Equipment. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Please install and use the equipment according to this instruction manual. PRECAUTIONS Be sure to observe the following precaut
Summary of the content on the page No. 7
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 6 Camera Features •Stores approximately 8 Fine, 15 Normal or 27 Economy (1600 x 1200 pixels) mode photos with 7MB internal memory •Virtually unlimited storage using the removable MultiMediaCard (MMC) or Secure Digital (SD). (MMC/SD memory cards are sold separately). • 1.6" Color LCD • USB connection and cable • TV connection (NTSC and PAL) •Built-in automatic flash •Focus free from 4 feet (1.2 meters) to infinity • 1600 x 1200 pixel output (2.0 Megap
Summary of the content on the page No. 8
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 7 System Requirements PC: •Microsoft Windows 98SE/ME/2000 and XP • IBM PC/AT or compatible, 200 Mhz or higher •Minimum 32MB RAM (64MB recommended) • USB Port • 640 x 480 monitor, minimum 16 bit color (1024 x 768 24 bit color recommended) • 175MB free hard disk space • 56K or faster modem, ISDN or LAN connection (for the Web Camera feature only) • CD-ROM drive Macintosh: •Mac OS 9 or higher •Macintosh Power PC or higher, Minimum 64MB of RAM • USB P
Summary of the content on the page No. 9
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 8 1. The Camera Overview of Your Concord Eye-Q Go 2000 FRONT/TOP 1. Shutter Button 1 4 2. Rotary Switch 2 5 3. Neck/Wrist Strap Mount 6 4. Viewfinder 7 5. Flash Sensor 3 6. Flash 8 7. Self-timer LED 9 8. Lens 9. Slide Switch BACK/BOTTOM 10. Camera Ready LED 11. LCD 14 12. USB/TV Out Ports 13. Tripod Socket 10 14. Viewfinder 15 15. Navigation Button 16 16. Power Button 17 11 17. LCD On/Off Button 18 18. OK Button 19 12 19. Menu Button 20. Battery Doo
Summary of the content on the page No. 10
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 9 Loading the Battery The camera uses one 3V CR123 lithium battery. Loading the Battery: 1. Locate the battery door on the bottom of the camera. 2. Slide the battery door outwards, as indicated by the arrow and lift the battery door to open. (fig.1.1) 3. Insert the 3V CR123 lithium battery with the fig.1.1 positive terminal (+) toward the inside of the battery compartment. 4. Close the battery door, press down on it and slide it towards the center o
Summary of the content on the page No. 11
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 10 Turning the Camera on and off To turn the camera on and off: 1. Press the On/Off button for a few seconds. The camera will beep when it is turned on. 2. To turn the camera off, press the On/Off button fig.1.3 for a few seconds. fig.1.4 Note: Please peel off the thin protective plastic film on the LCD before use. 10
Summary of the content on the page No. 12
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 11 LCD Menu Screens MODE Video Clip Self-timer Main Menu IMAGE SIZE 1600 x 1200 1280 x 960 640 x 480 OK MENU IMAGE SIZE Main Menu MAIN MENU M Mode OK MENU QUALITY Size Quality Fine Flash Normal Economy OK MENU FLASH QUALITY Auto Main Menu A Flash Flash Off OK MENU OK MENU FLASH Main Menu OK MENU 11
Summary of the content on the page No. 13
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 12 LCD Menu Screens – EXPOSURE VALUE + WB AWB Sunny Fluorescent OK MENU WB MAIN MENU Tungsten + EV – Main Menu WB WB S Scene OK MENU Brightness SCENE Off Off OK MENU – Brightness + 12
Summary of the content on the page No. 14
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 13 LCD Menu Screens 15S 30S 60S 90S None MAIN MENU SETUP PC DSC Setup Time-out 60S Exit Driver DSC NTSC TV PAL PAL PlayLogo Off SETUP Language Language Default English F Format Français Main Menu OK MENU Language Español Deutsch Italiano OK MENU Format This operation will delete all images No Yes 13
Summary of the content on the page No. 15
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 14 LCD Menu Screens DELETE THIS FILE? DELETE No Delete One Yes Delete All Main Menu DELETE ALL FILES? No Yes MAIN MENU Delete Thumbnail Brightness Exit – Brightness + 14
Summary of the content on the page No. 16
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 15 LCD Status Messages Messages on the LCD indicate if the memory is full or if there is a problem with the memory. 1. MEMORY CARD IS FULL: The memory card is full. MEMORY CARD FULL! 2. INTERNAL MEMORY IS FULL: The internal memory is full. INTERNAL MEMORY FULL 3. ERROR: The camera’s internal memory or the MMC/SD may be corrupted. Please format ERROR! the memory. (P.33) 15
Summary of the content on the page No. 17
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 16 Turning the LCD On and Off 1600 A By default, the LCD automatically turns on when the camera is powered on. Press to AWB turn the LCD on or off. 005/080 Using the Display ON/OFF Button: 1. Press once to turn the LCD icons off. 2. Press again to turn the LCD off. 3. Press to turn the LCD on. A Camera Ready LED Status When the Camera Ready LED is: 1. Steady A The camera is in capture mode. Please hold the camera steady during this t
Summary of the content on the page No. 18
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 17 Camera Memory The Concord Eye-Q Go 2000 can store files in one of two ways using either the camera’s 7MB internal memory or the removable MMC/SD. Memory cards are sold separately and can be purchased from major electronic or computer retailers. When the MMC/SD is inserted, the images and video clips stored in the internal memory will be transferred automatically onto the memory card. LCDDefault Memory MMC/SD No Internal Memory (7MB) Note: If a
Summary of the content on the page No. 19
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 18 Using the MultiMediaCard or the Secure Digital Memory Card Inserting the memory card: 1. Locate the battery cover on the bottom of the camera. 2. Slide the battery door away from the camera body and lift the battery door to open. 3. Insert the MMC or SD memory card as indicated by the arrow. (fig.1.6) fig.1.6 4. Close the battery door. Press down on it and slide it towards the center of the camera until it snaps into place. Note: Please use MMC/
Summary of the content on the page No. 20
GO 2000-E (511682-00) 3/10/02 2:30 pm Page 19 SLIDE SWITCH The camera has a Slide Switch that has 3 image taking modes: macro ( ), portrait ( ) and distant ( ). The current flash setting is displayed in the upper left corner of the LCD. Slide Switch Flash Status Conditions Distance from Position subject A Macro ( ) Auto Flash ( ) Use this option to 2.2ft. (0.65m) to take close-up 4.7ft. (1.4m) photography. Portrait ( ) Auto Flash ( ) A Use this option in 4.7ft. (1.4m
