Summary of the content on the page No. 1
DXG-328
User’s Manual
Version 2.0 07/01/04
Summary of the content on the page No. 2
Contents 4-5 PC Mode………......................………….........……....14 . Chapter 1 Attention Chapter 5 Preparing Your Camera 1-1 Safety Precautions……….....................…....…..…...2 5-1 Attaching the Strap….............…......……………......17 1-2 Before Using Your Camera……..............……..........2 5-2 Loading Batteries.....………...................……........17 1-3 Operating Precautions.…......................…….........2 5-3 Loading and Removing the Memory Card....….....18 1-4 Package
Summary of the content on the page No. 3
1. Attention Please read through this manual carefully before using restrictions are in place, you may not record the camera and follow the instructions to avoid damage performances, improvisations or exhibits, even for caused by improper operation. personal purpose. Any transfer of pictures or memory card with data must be conducted under the constraints of copyright law. 1-1 Safety Precautions ●Be extra careful with the LCD liquid. If the LCD ●The software CD-ROM packag
Summary of the content on the page No. 4
4. Locations full of smoke, oil fumes or steam. 1-4 Package Contents 5. Locations subject to strong magnetic fields. 6. Rainy or snowy environments. Check to see you have received the following items: Camera Do’s and Don’ts: ● Do not open the battery cover when the power is on. ● If water gets into the camera, turn the power OFF CD-ROM and remove the batteries immediately. (Incl. Camera Driver), Pouch, Wrist Strap, Batteries ● Do maintain your camera:
Summary of the content on the page No. 5
2. Getting to Know Your Camera 2-1 Features Overview Front View (1) Shutter (2) Flash (3) Lens (4) Power Switch (5) Strap Holder (6) Battery Cover (7) Memory Card Slot (8) Tripod Socket 3
Summary of the content on the page No. 6
Rear View (1) Macro LED (2) Status LED (3) Mode Display Button (4) Mode Button (5) Set Button (6) Function Key (7) Macro Lens Switch (8) USB Port Cover (9) USB Port (10) LCD Monitor 4
Summary of the content on the page No. 7
2-2 Specifications 1280x960 1600x1200 2048x1536 2976x2232 Fine 32 21 13 6 16MB Normal 60 52 32 15 ● Lens: f=8.341mm ● Image Sensor: 1/2" CMOS with 3.0 megapixels ● Power Supply: 2 x AAA Alkaline Batteries or ● Focus: F / 3.0 supports USB 5V (PC-CAM Mode) ● Sensitivity: ISO 100 ● White Balance: Auto, Sunny, Bulb, Fluorescent. ● Dimensions: 85.5 x 55 x 18 mm ● Shutter: Electrical ● Weight: About 82g (batteries excluded) ● Shutter Speed: 1/4 sec. ~ 1/2000 sec.
Summary of the content on the page No. 8
System requirement (Macintosh Computer) OS Mac OS 8.6~9.2, Mac OS X 10.1 or above CPU PowerPC 601 processor or higher Memory 64 MB memory or above HDD Minimum 10MB free disk space on the hard drive Others One standard USB 1.1 or USB 2.0 port and CD-ROM 6
Summary of the content on the page No. 9
3. Controls, Operation, and Display 3-1 LED Indicators 3-2 LCD Monitor Display The meanings of the LED indicators located on the top of the LCD monitor are: Macro LED Standby/Busy (Green LED) (Red LED) (1) Image Resolution (2) Image Quality (3) Current Working Mode Macro (Left The green LED turns on when (4) Memory Status Green LED) the Macro key on the left (5) Image Number hand side of the camera is (6)
Summary of the content on the page No. 10
※ If no operations are performed for 60 seconds, the 3-3 Power Supply power is turned off to prevent battery drain. Please power on the camera again to resume shooting. ● Depress the power button until a long beep sounds. Power is on. ※The following features are automatically saved in the configuration before the camera is turned off unless "Reset Default" has been selected to restore its factory settings. 1. Resolution 2. Image Quality 3. Language 4. White balance
Summary of the content on the page No. 11
3-5 Mode Selection 3-8 Mode Display Button ●Please press and hold the ” ” button for 2 seconds to enter mode selection menu including “Play Mode” “Setup Mode” “Movie Mode” “Record Mode" and "Function Selection” Press this button to change the LCD Monitor to one of several display types. . Standard→Image only→LCD OFF→Standard 3-6 Function Keys 3-9 Macro Button Use the switch on left side of the camera to select either Basic (normal l
Summary of the content on the page No. 12
4. Navigating Modes and Menus Index for Quick Menu: Press MODE to enter 4-1 Record Mode ↑ For more information, please refer to section 3-2, "LCD Monitor Display," page 8. Press Mode again to Exit 10
Summary of the content on the page No. 13
2. Slideshow 4-2 Image/Movie Play Mode Start Auto Play (1) Image Number/Total Images 3. DPOF (Digital Print Order Format) Settings. (2) Remaining Battery Power DPOF (Digital Print Order Format) allows for tagging of images on memory cards for printing. DPOF allows Index for Quick Menu: digital camera users to define what images are to be printed on compatible print devices. Basically, i
Summary of the content on the page No. 14
DPOF Tip: ※ The DPOF function is only enabled when a memory card is inserted. 4-3 Movie Mode (1) Movie Mode (2) Recorded Movie Time (seconds) (3) Recording (4) Remaining Battery Power (5) Time/Date 12
Summary of the content on the page No. 15
3. White Balance (Auto) (Sun) 4-4 Setup Mode 1. Image Resolution 2976x2232 2048x1536 (Fluorescent) (Bulb) 1280x960 1600x1200 4. EV Compensation 2. Image Quality (Fine Quality) (Basic Quality) 13
Summary of the content on the page No. 16
5. OSD Language 7. Light Frequency Select the correct frequency type (50Hz or 60Hz) according to your region. 8. Format Media ※ If a memory card has been inserted, only the memory card is formatted, and not the internal memory. 6. Date/Time 9. Reset to Default Factory Settings
Summary of the content on the page No. 17
4-5 PC Mode 15
Summary of the content on the page No. 18
5. Preparing Your Camera 5-1 Attaching the Strap 5-2 Loading Batteries ● Turn the camera off. ● Insert 2 x AAA alkaline batteries or rechargeable batteries. Please make sure the batteries are fully charged. If the batteries are low, please change the batteries as soon as possible to maintain normal operation. ※ If the battery power indicator only shows one black ●Insert the thin end of the strap into the strap holder. block, the flash is disabled. If
Summary of the content on the page No. 19
● Memory card insertion diagram. ● Close and lock the battery cover. NOTE: Open the cover gently to avoid damaging the battery compartment cover. Battery Tips: ※ If the battery power indicator shows only one black ● Insert the memory card according to the indicated block, the flash light is disabled. arrow. ※ When the battery indicator turns red, you can no 2. Removing the Memory Card longer record still pictures and movies. ※ The
Summary of the content on the page No. 20
● The memory card should pop up automatically. ● DO Keep the card contacts clean. If the camera does Remove the memory card in direction indicated by not detect the memory card, gently wipe the metal the arrow (see illustration). interface of the card with a soft cloth and reload the card. Attention: Before using the camera, please remember to insert 5-4 Setting Up the OSD Language the memory card into the slot. If the memory card is full or contains unwanted images/fi
