Canon PIXMA MP620 user manual

Summary of the content on the page No. 1

Canon
PIXMA MP620
Macintosh Wireless Setup
For USB, Wired LAN and all Windows connections see Getting Started Guide.
Before starting please locate and write down your access point settings:
Network Name (also called SSID):
Network password (if applicable):
Photo All-In-One
series
Getting Started
Hardware Setup
=Read Me First=
1 Follow setup instruction on pages 2-8 of the Getting Started Guide

Make sure to read this manual before using the machine. Please keep it in hand for future reference.

Summary of the content on the page No. 2

Driver/Software Install 3 continued... 6 7 5 Click Easy Install. Follow on-screen instructions. Click Restart. When computer restarts, Canon IJ Network Tool starts automatically. For Users With One Access Point 4A For Users With Multiple Access Points (Wireless Routers) Proceed to Section 4B 1 2 a. On the Canon IJ Network Tool a. Select Setup in the drop down menu screen, select LAN connection b. Select MP620 series in Printers b. Click OK c. Click OK 3 4 a. When the Access Points screen

Summary of the content on the page No. 3

For Users With Multiple Access Points (For example: AirPort Extreme AND Time Capsule) 4B 1 2 3 a. On the Canon IJ Network Tool a. Select Setup in the drop down menu Click Manual Setup screen, select LAN connection b. Select MP620 series in Printers b. Click OK c. Click OK 4 6 5 a. Enter the Network Name (SSID) that a. Check the Authentication Type a. Enter your Passphrase you would like the printer to join b. Click Next b. Click Next b. Choose your Encryption Method from the drop down

Summary of the content on the page No. 4

Measure Wireless Performance 5 1 2 On the Connection Performance Confirm the measurement results, Measurement dialog box, click then click Finish . Ne xt . Ensure that is displayed in Connection performance between the printer and the access point. The Printer Setup Utility and Canon IJ Network Scanner Selector will start up. To check whether the new location is better, click Remeasurement . Measurement of the communication status is performed again. Complete the Setup 6 1 2 3 a