Summary of the content on the page No. 1
17-inch Color LCD Flat Panel Display Monitor
Instruction Manual
EN MON170CL
Summary of the content on the page No. 2
| MON170CL | Instruction Manual | Important Safeguards EN 2 Important Safeguards 1. Read, Follow, and Retain Instructions - All safety 10. Power Sources - Operate the unit only from the type and operating instructions should be read and of power source indicated on the label. If unsure of followed before operating the unit. Retain instructions the type of power supply to use, contact your dealer for future reference. or local power company. 2. Heed Warnings - Adhere to all warnings on the unit
Summary of the content on the page No. 3
| MON170CL | Instruction Manual | Safety Precautions EN 3 Safety Precautions For Indoor Product 1. Water and Moisture - Do not use this unit near water - for example, in a wet basement, in an unprotected outdoor installation or in any area classified as a wet location. CAUTION: TO REDUCE THE RISK OF 2. Object and Liquid Entry - Never push objects of ELECTRIC SHOCK, DO NOT REMOVE COVER any kind into this unit through openings, as they (OR BACK). NO USER SERVICEABLE PARTS might touch dangerous vol
Summary of the content on the page No. 4
| MON170CL | Instruction Manual | FCC & ICES Information EN 4 FCC & ICES INFORMATION (U.S.A. and Canadian Models Only) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pu
Summary of the content on the page No. 5
| MON170CL | Instruction Manual | Contents EN 5 Table of Contents Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Front Panel and I/O Connector Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 6
| MON170CL | Instruction Manual | Front Panel and I/O Connector Diagrams EN 6 Key: A. “ i ” (Info) Button B: -, + Buttons C: “ M ” (Menu) Button D: Power LED Identification E: Power Button ABCD E Figure 1: Front Panel AB C D E A: DC input B: VGA input C: Video (CVBS) input D: Y/C input E: Audio input Figure 2: I/O Connectors Bosch Security Systems | 6 July 2005
Summary of the content on the page No. 7
| MON170CL | Instruction Manual | Unpacking EN 7 1.0 UNPACKING 3.0 GENERAL FEATURES The MON170CL is a 17-inch TFT monitor with a This equipment should be unpacked and handled with care. If an item appears to have been damaged in 1280 x 1024 XGA resolution which has been designed to display both PC and Video images. It complies with shipment, notify the shipper. the power management regulations of VESA DPMS, it Verify that all parts shown in the Parts List have been is supported by Plug & Play,
Summary of the content on the page No. 8
| MON170CL | Instruction Manual | Installation EN 8 5.2 Desktop Installation The MON170CL monitor is delivered with a 3-pole US style power cord and a 3-pole Euro style power cord. Use the US style power cord where 120 VAC, 60 Hz power is available, and the Euro style power cord where 230 VAC, 50 Hz power is available. The monitor end of the power cord plugs into the power connector at the power adapter. The monitor automatically adjust to either power input voltage. Photo C 5.2.1 Power Supply I
Summary of the content on the page No. 9
| EN 9 MON170CL | Instruction Manual | Installation 5.4 Connecting the Y/C (S-video) Signal 5.7 VESA Standard Mounting Hole (For to the Monitor Wall-mount Use) There is one (1) mini-DIN type connector for the 1. Carefully press the cover and remove it from the S-video (Y/C) input (see Figure 2 and Figure 3 below). stand. (as shown in photo G) N NO OT TE E:: Both Y and C inputs are terminated with 75 2. Unscrew the three holdings screws hidden under the high cover before separating the stand
Summary of the content on the page No. 10
| MON170CL | Instruction Manual | Operation EN 10 5.8 Ventilation Color Temp. (For CVBS/S-VIDEO only) To prevent overheating, ensure that the ventilation openings on the rear of the monitor are not covered. 6.0 OPERATION 6.1 Front Panel Controls (Figure 1) (i) Input • Press this button to display the input signal which is selected on the screen • Press the button to exit OSD menu. Tint: Adjusts the tint value (NTSC only). +/- • Press the ‘+ +’or‘--’ button to move the (0-100) cursor to the tar
Summary of the content on the page No. 11
| MON170CL | Instruction Manual | Operation EN 11 Input Select Information (For CVBS/S-VIDEO only) Information (For VGA only) OSD Setup H. Position: Adjusts the OSD horizontal Reset position. (0-100) V. Position: Adjusts the OSD vertical position. (0-100) OSD Timeout: Adjusts the OSD window display time. (0-100) Language Reset: Returns the monitor setting to the factory default. Exit Exits the OSD menu. Language: Select the language to be used in OSD. [English / Français / Italiano / Deutsch
Summary of the content on the page No. 12
| MON170CL | Instruction Manual | Operation EN 12 6.2.2 VGA Mode Only 6.3 Notation Image Setup The message "Input Not supported " will be displayed in the VGA mode if the PC is operating with either a resolution or timing mode that is not supported by the MON170CL. Focus: Adjusts the focus value. (0-100) Clock: Adjusts the clock frequency. (0-177) Image Position H. Position: Adjusts the horizontal position. (0-100) V. Position: Adjusts the vertical position. (0-100) Bosch Security Systems | 6
Summary of the content on the page No. 13
| MON170CL | Instruction Manual | On-Screen Display Menu Configuration EN 13 7.0 ON-SCREEN DISPLAY MENU CONFIGURATION 7.1 CVBS/ S-VIDEO Mode Contrast CVBS/ S-VIDEO Luminance Brightness Tint Color Temp. Color VGA Input Select S Video CVBS H. Position OSD Setup V. Position OSD Timeout English Deutsch Language Italiano Information Composite Yes Reset No Exit Bosch Security Systems | 6 July 2005
Summary of the content on the page No. 14
| MON170CL | Instruction Manual | On-Screen Display Menu Configuration EN 14 7.2 VGA Mode Contrast VGA Luminance Brightness Focus Image Setup Clock H. Position Image Position V. Position 9300 K Color Temp. 6500 K User VGA S Video Input Select CVBS H. Position OSD Setup V. Position OSD Timeout English Deutsch Language Italiano 1024 x 768 Information H: 60 KHz V: 60 Hz VGA Input Yes Reset No Exit Bosch Security Systems | 6 July 2005
Summary of the content on the page No. 15
| MON170CL | Instruction Manual | Technical Specification EN 15 8.0 Appendix A - Technical Specification Electrical Power On/Off Rated Voltage 120/230 VAC, 50/60 Hz On-Screen Display Voltage Range 100 to 240 Video Contrast, Brightness, Tint (NTSC only), Power at Rated Voltage 30 W Saturation Sync Format PAL/NTSC Misc Volume, Timer, Reset, Exit LCD Panel TFT LCD OSD Menu Language, OSD H Position, Screen Size 338.0 (H) x 270.3 (V) mm (13.3 x 10.6 in.) OSD V Position, Timer Viewable Picture Area
Summary of the content on the page No. 16
Americas Europe, Middle East, Africa Asia-Pacific Bosch Security Systems Bosch Security Systems B.V. Bosch Security Systems Pte Ltd 130 Perinton Parkway P.O. Box 80002 38C Jalan Pemimpin Fairport, New York, 14450, USA 5600 JB Eindhoven, The Netherlands Singapore 577180 Phone: +1 (585) 223 4060 Phone: +31 (0) 40 27 83955 Phone: +65 6319 3450 +1 800 289 0096 Fax: +31 (0) 40 27 86668 Fax: +65 6319 3499 security.sales@us.bosch.com emea.securitysystems@bosch.com apr.securitysystems@bosch.com http:/
