BenQ DV2050 user manual

Summary of the content on the page No. 1

English
DV2050
20.1” LCD TV
User's Manual
Welcome

Summary of the content on the page No. 2

English Copyright Copyright BenQ Corporation. All rights reserved. No part of this User's Manual may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation. Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect

Summary of the content on the page No. 3

English 4. Follow instructionsAll operating instructions must be followed. 5. Water and moistureDo not use this product near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like space.Do not use immediately after moving from a low temperature to a high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards. 6. CleaningUnplug this product from the

Summary of the content on the page No. 4

English 10. Power cord protection Power-supply cords should be routed so that they are not likely to be walked on or snagged by items placed upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product. 11. AttachmentsDo not use attachments not recommended by the manufacturer. Use of improper attachments can result in accidents. 12. AccessoriesWhen the product is used on a trolley, care should be taken to avoid quick

Summary of the content on the page No. 5

English 19. Wall mountingWhen mounting the product on a wall, be sure to install the product according to the method recommended by the manufacturer using only the manufacturers mounting hardware. This is a safety requirement.. 20. StandDo not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as wellas damage to the product. Use only a trolley, stand, tripod, an

Summary of the content on the page No. 6

English 25. Installation of an external antenna - EXAMPLE OF ANTENNA GROUNDING AS When installing an outside antenna to the PER NATIONAL ELECTRICAL CODE television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to: • proper grounding of the mast and supporting structure; • grounding of the lead-in wire to an antenna discha

Summary of the content on the page No. 7

English Table of Contents Introduction............................................................................1 Functions and Features ...................................................................................... 1 Package Contents....................................................................2 Getting to Know Your TV......................................................3 Main Unit (Front View) ....................................................................................

Summary of the content on the page No. 8

English Display Information ........................................................................................... 19 The On-Screen Display (OSD) Menu................................... 20 How to Use the OSD Menu ............................................................................... 21 AUDIO Menu ..................................................................................................... 22 PICTURE Menu.......................................................................

Summary of the content on the page No. 9

English Introduction Thank you for purchasing the BenQ DV2050 Liquid Crystal Display Television. Your DV2050 will bring you years of high-quality viewing enjoyment. It is also extremely easy to operate, and provides exceptionally high image quality. The DV2050 is also extremely versatile. You can install your TV on the wall (optional wall- mounting kit is required) or set it on a table, and it can be used under any type of illumination. This manual will explain the operation of the DV2050 Liqu

Summary of the content on the page No. 10

English Package Contents Please ensure that the following items are included with your DV2050 Liquid Crystal Display TV. If any item is missing or damaged, contact an authorized dealer immediately. DV2050 LCD TV (x1) User's manual (x1) Power cord (x1) Composite video (AV) cable (x1) AAA batteries (x2) Different countries have different AC power cord types. 2 Package Contents Remote control (x1)

Summary of the content on the page No. 11

English Getting to Know Your TV Main Unit (Front View) 1 1 2 4 3 No. Name Description 1Speaker High-quality speakers for delivering excellent sounds. • When the TV is powered on, the green power indicator lights up. 2 Power indicators • When the TV is in standby mode, the red indicator lights up. This indicator will light up in amber if the sleep timer 3 Sleep timer indicator function is activated. 4 Remote control sensor window Receives the signal from the remote control. Control Panel 5 4

Summary of the content on the page No. 12

English • These two buttons allow direct selection of channels. 3 Channel ( )/( ) • When the OSD main screen is active, pressing these buttons allows selection of options. • Press Volume to increase the volume, or Volume to decrease it. 4 Volume ( )/( ) • When the OSD main screen is active, pressing these buttons allows selection of settings. Press this button to display the on-screen display (OSD) menu. Press 5MENU this button once again to close the OSD menu. Main Unit (Rear View) 4

Summary of the content on the page No. 13

English Setting up Your TV Connecting the Power Cord 1. Connect the female end of the AC power cord to the AC input on the TV. 2. As shown in the diagram, connect the male end to a wall power outlet. Household power outlet Power cord • This product must be operated only from the type of power source indicated on the marking label (AC 100~240V 50/60 Hz). • If the TV will not be used for a long period of time, it should be unplugged from the wall outlet. Connecting the Antenna Connecting CATV Yo

Summary of the content on the page No. 14

English Antenna The antenna equipment has far more effect on reception for color TVs than on black and white models. We suggest you use a good-quality outdoor antenna. Following are simple explanations for the connection of various types of antennas. 1. Generally speaking, 75 ohm systems have a round cable with an F-shaped connector which requires no tools. Attach the cable directly to the input (not included). 2. 300 ohm systems have a flat "dual lead" type cable. A 300-75 ohm transformer

Summary of the content on the page No. 15

English Connecting AV Equipment Connecting Composite (AV) Video Signal Connect the Composite (AV) output of your AV equipment to the Composite (AV) signal terminal on the TV using a Compos- ite (AV) video cable (RCA connector) as illustrated. Video game Composite video input is the most commonly used signal input. However, this type of input also provides a less optimal image quality. Many video sources can only output Composite video sig- nals, for example, VCRs and camcorders. Other video s

Summary of the content on the page No. 16

English Connecting Component Video Input (Y CB/PB CR/PR) Signals Connect your AV equipment to the TV's Component Y CB/PB CR/PR intput using a Component video cable. DVD player 1.Of the currently available video signal types, Component video input offers the best quality. Component video output is available on progressive scan DVD players and Digital television decoders. The image quality with this type of input is superior to that obtained with S-video. All High Definition Television signals m

Summary of the content on the page No. 17

English Connecting Audio Output Signals DV2050 provides extra audio output ter- minals for delivering TV audio signal to an amplifier or other audio devices. Connect the AUDIO OUT L/R terminals on the TV to the signal input terminals of an amplifier or other audio devices using the AV cable or equivalent. Setting up Your TV 9

Summary of the content on the page No. 18

English Remote Control 1. POWER Press this button to power on the TV. Press it again to put the TV into standby mode. 2. INFO Press this button to display the TV channel message and any other signal messages. Press the EXIT but- ton (17) to turn the info off. 3. ASPECT Press this button to adjust screen image aspect ratio. 4. TV/CATV Press this button to switch between TV or cable tuner mode. 5. BACKLIGHT Press this button to select the desired backlight level. 6. PIP/PBP (Function not avail

Summary of the content on the page No. 19

English 15. / / / and OK button • : press the or buttons to select settings. • : press the or buttons to adjust OSD menu settings. • Press OK to execute selections, or to enter a submenu you have selected. 16. FAVORITE Press this button to jump to one of the five favorite TV channels you have stored. 17. EXIT When operating the on-screen display, press this button to return to the next higher menu level. 18. CH / Press this button to sequencially change channels. 19. VOL +/- Press t

Summary of the content on the page No. 20

English Using the Remote Control When using the remote control, aim it at the remote control sensor window on the TV. If there is an object between the remote control and the signal remote control sensor window on the TV, the remote may not operate. When using the remote control, please note: • Do not strike or drop the remote. Do not expose the remote control to liquids and do not place it in humid environments. • Do not install or place the remote control in direct sunlight. The heat may dam