Summary of the content on the page No. 1
26LT670H 32LT670H 37LT670H 42LT670H
55LS675H
®
Lodging Guest Interactive Pro:Centric TVs
Commercial Mode Setup Guide
Note: Selected features shown in this guide may not be available on all models.
EXPERIENCED INSTALLER
Automated Installation Routine Wizard
pages 11 – 13
Custom Master TV Setup
pages 14 – 17
Cloning Information
pages 28 – 36
FTG Mode of Operation
pages 37 – 48
© Copyright 2012 LG Electronics U.S.A., Inc. P/N: 206-4213 (Rev D)
Summary of the content on the page No. 2
For Customer Support/Service, please call: MODEL and SERIAL NUMBER The model and serial numbers of this TV are located on the 1-888-865-3026 back of the cabinet. For future reference, LG suggests that you record those numbers here: The latest product information and documentation is available online at: Model No._________________ Serial No._______________ www.LGsolutions.com WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 17. Power Cord Caution: It is recommended that appliances be placed 2. Keep these instructions. upon a dedicated circuit; that is, a single outlet circuit 3. Heed all warnings. which powers only that appliance and has no additional outlets or branch circuits. Check the TV specifications to 4. Follow all instructions. be certain. 5. Do not use this apparatus near water. Periodically examine the cord of your appliance, and if its
Summary of the content on the page No. 4
IMPORTANT SAFETY INSTRUCTIONS 26. Do not touch the ventilation openings, as they may become (Continued from previous page) hot while the TV is operating. 22. Outdoor Antenna Grounding 27. If you smell smoke or other odors coming from the TV or If an outside antenna or cable system is connected to the hear strange sounds, unplug the power cord, and contact an product, follow the precautions below. authorized service center. An outdoor antenna system should not be located in the 28. Do
Summary of the content on the page No. 5
Table of Contents Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FTG Mode via CPU . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 – 43 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . 3 – 4 Creating an FTG Configuration File using the FTG File Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Teaching FTG Configuratio
Summary of the content on the page No. 6
Commercial Mode Overview ® This document describes how to set up LT670H and LS675H Pro:Centric TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides in the TV’s CPU, Protocol Translator Card (PTC), or embedded b-LAN™ (EBL) module, or it resides externally from the TV (i.e., in a device from the solution provider). These TV models are capable of Free-To-Guest (FTG) Mode operation via the TV CPU. Alternat
Summary of the content on the page No. 7
Commercial Mode Overview (Cont.) Installer Menu To create a Master TV Setup, you will need to know how to access the commercial controller (PTC) Installer Menu xxLT670H PTC INSTALLER MENU and make changes to the default values as required. If CPU-CTV necessary, familiarize yourself with the Installer Menu and how to make and save changes. Refer to pages 18 to 26 000 INSTALLER SEQ 000 for information on accessing the Installer Menu and for detailed descriptions of the Installer M
Summary of the content on the page No. 8
Commercial Mode Overview (Cont.) FTG Mode ® This mode enables Pro:Idiom decryption and also allows logical channel mapping of physical channels to remove the need for dash tuning. TV operation in FTG Mode is based on which element of the TV owns the FTG Logical Channel Map—the CPU or the EBL. Understanding the application in which the TV will be used is vital in determining the owner. As indicated above, FTG mode operation in the LT670H and LS675H models can be provided either by the TV C
Summary of the content on the page No. 9
Pro:Centric Operation Pro:Centric TV Interactive Menu Features When running the Pro:Centric application, the interactive Pro:Centric TV enables guests to locate and select television entertainment using an interactive channel guide, check the daily weather, and view hotel and surrounding amenities via custom billboards and points-of-interest maps. Pro:Centric application features include: • Portal and information screens/pages (including a “Welcome” page) that include branding logos. • An op
Summary of the content on the page No. 10
Pro:Centric Operation (Cont.) Pro:Centric Setup Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client User Guide. This document describes only those settings that must be specified on the TVs. On the TVs, the Data Channel must be set appropriately to enable Pro:Centric remote management/ administration facilities, while the Pro:Centric Application Mode must be set appropriately to enable the Pro:Centric application. •
Summary of the content on the page No. 11
Automated Installation Routine Wizard The Automated Installation Routine Wizard will appear on Move OK Welcome the screen each time the TV is turned ON, until one of its configuration methods has been completed or the wizard is Please select configuration method. exited. Pro:Centric Auto The wizard’s Welcome screen provides a selection of Pro:Centric Manual configuration methods: Auto or Manual options for configuring USB Configuration essential items for Pro:Centric operation and also a
Summary of the content on the page No. 12
Automated Installation Routine Wizard (Cont.) Pro:Centric Manual Configuration If you already know the settings (i.e., Data Channel and Pro:Centric Application Mode) that need to be configured in order for the TV to connect to the Pro:Centric server, you may streamline the setup process by entering this data manually. 1. Use the Up/Down arrow keys on the Installer Remote to select/highlight Pro:Centric Manual from the Automated Installation Routine Wizard Welcome screen. Then, press OK. In t
Summary of the content on the page No. 13
Automated Installation Routine Wizard (Cont.) USB Configuration This section describes how to configure a TV for FTG Mode via CPU operation using an FTG Configuration (.tlx) file loaded on a USB memory device. Note: Refer to the Free-To-Guest (FTG) File Manager User Guide and/or “Creating an FTG Configuration File using the FTG File Manager” on pages 39 to 40 for information on creating an FTG Configuration (.tlx) file. Note: This procedure assumes that the FTG Configuration file contains a
Summary of the content on the page No. 14
Custom Master TV Setup This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in Pass-through Mode. Note: Refer to FTG Mode information on pages 37 to 48 for details on entering FTG Mode and configuring/ editing the FTG Channel Map and FTG Installer Menu settings. Note: Cloning requirements and procedures are described in detail on pages 28 to 36. Before You Begin Cloning Methods See also “Clonable TV Setup Menu Features” list below. • It is recomm
Summary of the content on the page No. 15
Custom Master TV Setup (Cont.) Custom Master TV Setup Procedure 1. Turn ON the TV. If the Automated Installation Routine Wizard appears on the screen when you turn ON the TV, use the Up/Down arrow keys on the Installer Remote to select Exit from the Welcome screen, and press OK to exit the wizard. 2. Set Installer Menu items. This step provides specific instruction only on the Installer Menu items that should be set on a Master TV. Refer to pages 18 to 26 for detailed xxLT670H PTC INSTALL
Summary of the content on the page No. 16
Custom Master TV Setup (Cont.) (Continued from previous page) Note: If you intend to clone the PTC, remember that only one TV source’s clonable setup menu settings will be cloned. Thus, for a clone programmer, the TV setup menu settings should be applicable to either an analog channel or Aux input, while for a USB device / .tll file, the TV setup menu settings should be applicable to the analog or digital channel or Aux input to which the Target TV will be set during the Teaching process.
Summary of the content on the page No. 17
Custom Master TV Setup (Cont.) (Continued from previous page) 5. Transfer the TV setup menu settings to the commercial controller (PTC): 2-5-5 + MENU Mode Note: This step is essential for successful cloning using a USB memory device / .tll file or a clone programmer. Without this step, the PTC will not contain any of the TV setup menu settings. Note: The maximum number of channels (analog, digital, and Aux inputs) that can be transferred to the PTC is 141. An attempt to transfer more than 1
Summary of the content on the page No. 18
Installer Menu Use the Installer Menu to set up, change, or view operational settings. Refer to the table on pages 20 and 21 for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing. Accessing the Installer Menu 1. Turn ON the TV. If the Automated Installation Routine Wizard appears on the screen when you turn ON the TV, use the Up/Down arrow keys xxLT670H PTC INSTALLER MENU on the Installer Remote to select Exit from the Welcome screen, CPU-C
Summary of the content on the page No. 19
Installer Menu (Cont.) Using the Installer Menu Refer to the table starting on the next page for an overview of the available Installer Menu items, including their item numbers, functions, value ranges, and default values. Installer Menu items not relevant to these TV models are not present in the Installer Menu; therefore, some numbers are missing. For example, item 006 will not appear. In addition, items that are dependent on other Installer Menu item settings will not be initially accessi
Summary of the content on the page No. 20
Installer Menu (Cont.) Installer Menu Items 000 through 075 Menu Function Value Range Default Value Brief Description of Function and Comments Item 000 INSTALLER SEQ 0 ~ 3 0 Leave default set to 0. 001 POWER MANAGE 0 ~ 7 0 Sets number of hours of no activity before automatic shutoff. 002 AC ON 0 / 1 0 Set to 1 to enable Auto Turn ON when AC power is applied. 003 BAND/AFC 0 ~ 3 1 Selects Tuning Band: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC Channel tuned when TV is turned ON. (Set to 255 to tune to cha
