Summary of the content on the page No. 1
Installation and Assembly:
Dedicated Flat Wall Mount for Flat Panel Screens
Models: SF 16D
Features:
• Ultra-slim design holds the screen flat against the wall
• Integrated security features provide effective theft deterrence
Max. Load Capacity: 200 lb (90.7 kg)
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com
ISSUED: 08-02-05 SHEET #: 202-9010-1
Summary of the content on the page No. 2
Note: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer care at 1-800-729-0307. • This product should only be installed by a qualified professional. • Make sure that the supporting surface will safely support the c
Summary of the content on the page No. 3
Parts List Description Qty. Part # AA wall plate 1 200-1797 interface plate 1 200-0860 BB CC #14 x 2.5" wood screw 4 5S1-015-C03 DD Alligator® anchor 4 590-0097 M10 x 1.5 x 15 mm socket head screw 4 520-9262 EE FF 4 mm security allen wrench 1 560-1146 AA BB EE DD CC FF ISSUED: 08-02-05 SHEET #: 202-9010-1 3 of 9
Summary of the content on the page No. 4
Installation to Single Wood Stud Wall WARNING • Installer must verify that the supporting surface will safely support the combined weight of all attached equipment and hardware. Use a stud finder to locate the edges of the stud. Use of an edge-to-edge stud finder is highly recommended. Based 1 on its edges, draw a vertical line down the stud’s center. Place wall plate (AA) on wall as a template, making sure that the three mounting holes are over the stud centerline. The top mounting hole should
Summary of the content on the page No. 5
Installation to Double Wood Stud Wall WARNING • Installer must verify that the supporting surface will safely support the combined weight of all attached equipment and hardware. Wall plate (AA) can be mounted to two studs that are 16" apart. Use a stud finder to locate the edges of the studs. 1 Use of an edge-to-edge stud finder is highly recommended. Based on their edges, draw a vertical line down each stud’s center. Place wall plate on wall as a template. The top mounting slots should be 2.5"
Summary of the content on the page No. 6
solid concrete cinder block Installation to Solid Concrete or Cinder Block WARNING • When installing Peerless wall mounts on cinder block, verify that you have a minimum of 1-3/8" of actual concrete thickness in the hole to be used for the concrete anchors. Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally 1" minimum from the side of the block. Cinder block must meet ASTM C-90 specifica- tions. It is suggested that a standard electric drill on slow setting
Summary of the content on the page No. 7
Installing Interface Bracket to PLP Adapter Plate To prevent scratching the screen, set a cloth on a flat, level surface that will support the weight of the screen. Place 2 screen face side down. Attach the interface bracket (BB) to the PLP adapter plate (sold separately) using four M10 x 15 mm socket head screws (EE) as shown in figures 2.1 (portrait) or 2.2 (landscape). WARNING • Tighten screws so adapter brackets are firmly attached. Do not tighten with excessive force. Overtightening can cau
Summary of the content on the page No. 8
Installing Interface Bracket to LC Adapter Plate To prevent scratching the screen, set a cloth on a flat, level surface that will support the weight of the screen. Place 2 screen face side down. Attach the interface bracket (BB) to the LC adapter plate (sold separately) using four M5 screws provided with plate as shown in figures 2.3 (portrait) or 2.4 (landscape). WARNING • Tighten screws so adapter brackets are firmly attached. Do not tighten with excessive force. Overtightening can cause stres
Summary of the content on the page No. 9
Mounting and Removing Flat Panel Screen Note: Security screw may need to be loosened to avoid interference with wall plate. 3 Hook interface bracket (BB) onto wall plate (AA). Then slowly swing screen in as shown. Turn security screw, using security allen wrench (FF), clockwise at least six times to prevent screen from being removed as shown in detail 1. Screen can be adjusted horizontally if desired. Note: To lock the screen down, tighten security screw to wall plate using security allen wrench
