Summary of the content on the page No. 1
1. IMPORTANT SAFETY INSTRUCTIONS
Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if
improperly handled. This product has been engineered and manufactured with the highest priority on safety. But
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent
potential danger, please observe the following instructions when installing, operating and cleaning the product. To
ensure your safety and prolong the
Summary of the content on the page No. 2
9.Power cord protection—The power cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product. Power-supply cords should be routed so that they are not likely to be walked on or snagged by items placed upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product. 10.Attachments—Do not use attachments not recommended by the manufacturer. Use o
Summary of the content on the page No. 3
20.Stand—Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a trolley, stand, tripod, and bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer. 21.Caref
Summary of the content on the page No. 4
IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s encl
Summary of the content on the page No. 5
Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not the cable. l Do not make any modifications, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull the power cable. Doing so may cause damage to the power cable, which can cause fire or electric shock. If damage to the cable is suspected, have it repaired at an Authorized Service Center If the LCD TV is not in use for a long period of time, unplug the power c
Summary of the content on the page No. 6
2. INTRODUCTION Congratulations on your purchase of a THOMSON LCD TV. Your LCD TV will provide you with many years of enjoyment no other LCD TV can match. It is compatible with today’s current NTSC, PAL and SECAM systems, as well as tomorrow’s DTV standards. This TV is extremely easy to use and features high performance picture quality. The LCD TV is extremely versatile; it can be mounted on a wall or table stand, and it can be used in any ambient light environment. This manual will explain how
Summary of the content on the page No. 7
II PREPARATION Using the Remote Control Use the remote control by pointing it towards the remote sensor window of the set. Objects between the remote control and sensor window may prevent proper operation Cautions regarding use of remote control l Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity. l Do not install or place the remote control under direct sunlight. The heat may cause deformation of t
Summary of the content on the page No. 8
3. GETTING STARTED Switching on Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following pages describing how to use the remote control and the channel set-up procedure. 1. Connect the female plug to AC power input of the set. 2. Connect the male plug to the wall outlet as illustrated. Equipment for the UK is supplied with a mains cable fitted with a moulded plug. This plug contains safety components and must not be replaced by
Summary of the content on the page No. 9
Getting started Remote control TV functions Most of your television’s functions are available via the menus that appear on the screen .The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings. This page contains the description of the remote control. Standby / quit standby. DVD To access DVD mode. VCR To access VCR mode. TV To access TV mode. Press this button to con
Summary of the content on the page No. 10
Using the remote control for other equipment The remote control supplied with your set can be used for other equipment, such as video recorders, PC or DVD players. This page provides information concerning the remote control’s use with these types of equipment. VCR DVD VCR Press the VCR button DVD Press the DVD button On/Standby On/Standby MENU To display the main menu To display the main menu Vertical scrolling in menus Vertical scrolling in menus Horizontal scrolling in menus Horizontal scroll
Summary of the content on the page No. 11
4. CHANNELS SET-UP Note :If you use the device as LCD Monitor function not a TV, you may skip the chapter. Initial set-up @ AUTOMATIC INSTALLATION Return Initial set-up involves selecting all the settings required Standard EURO… to be able to search for and store all the channels you Start Running… can receive. Frequency 150.75MHz Programmes found 02 Make sure that the television is switched on and follow all the steps in turn specified on this page. 1. When you first switch the TV set on, the l
Summary of the content on the page No. 12
Organiser @ ORGANISER By using this menu you can change the channels order Return arranged during automatic set-up, name and rename Select programme 01 channels, delete duplicate channels or those with poor Swap with programme -- reception quality. Change pr. name BBC1 Delete programme 01 Follow the help messages at the bottom of the screen and refer to a TV programme guide to help identify the channels. Arranging channels in order The Select programme line is selected. Display the channel numbe
Summary of the content on the page No. 13
Manual channel set-up Follow the procedure given on this page if you find that some channels have not been stored during the initial set- up. This can happen if you are setting up cable network channels. Setting up channels manually requires every setting for a particular channel to be entered, one at a time. Display the OVERVIEW menu by pressing the @ MANUAL INSTALLATION MENU button. Return Select the Installation option and press OK to Standard EURO… confirm. Frequency 150.75MHz Programme name
Summary of the content on the page No. 14
5. OPERATION General operation Switching the TV set on and off To switch the TV set on, press the button located on the right side of the set. When the set is on, the indicator on the front is green. Standby mode Press the button on the screen right side of TV or on the remote control. The TV set remains powered up, but with low energy consumption. When the TV set is in standby mode, the indicator on the front is red. Quitting standby mode - Press the or any numeric button on the remote contr
Summary of the content on the page No. 15
Zoom In TV mode, you have the option of changing the display format and using the zoom function via the ! / ÿ buttons. Here is selections of Zoom: 4/3 Format - picture in 4/3 format Zoom 14/9 - picture in 14/9 letterbox format Zoom 16/9 - picture in 16/9 letterbox format Zoom 16/9 up - picture in 16/9 letterbox format moved up for subtitles Cinerama - Cinerama 16/9 Format - picture in 16/9 format Note : The Zoom type can’t be change when menu appears on the screen. In Teletext mode, the screen
Summary of the content on the page No. 16
Adjusting the sound X SOUND Display the OVERVIEW menu by pressing the Return MENU button. Preset Standard… Balance ------|----------- Select the Sound option and press OK to confirm. Sound type Stereo… Auto. volume leveling o The SOUND menu appears with the following Internal speakers ˛ options: Advanced settings … Return : go back to OVERVIEW menu Preset : use the ! or ÿ button to select the appropriate setting (Standard, Film, Voice, Music and Personal) for the programme you are watching. Per
Summary of the content on the page No. 17
Adjusting the picture The PICTURE menu can be used to adjust the current settings, to apply preset settings and define your own preferred settings. ÛPICTURE Display the OVERVIEW menu by pressing the Return MENU button. Preset Studio… Brightness ------|----------- Select the Picture option and press OK to confirm. Contrast ------|----------- Colour ------|----------- The PICTURE menu appears. It offers the following Sharpness ------|----------- Tone Warm… options: Other settings … Return: use the
Summary of the content on the page No. 18
Setting the Preferences The Preferences menu can be used to set your preference including Eco mode, Permanent PR, Back light, Sleep timer, TV Lock and Language. ! PREFERENCES Return Display the OVERVIEW menu by pressing the Eco mode o MENU button. Permanent pr. number o Backlight Normal… Select the Preferences option and press OK to Sleep timer 0:00 confirm. TV lock o Language English… The PREFERENCES menu appears. It offers the following options Return: use the buttons to go back to the OVERVIE
Summary of the content on the page No. 19
Teletext The Teletext service is available in many countries under a variety of names (TOP Text, Fastext, FLOF text, Videotext). It is provided as a free service by television broadcasters. This service provides a real wealth of information, available at any time, on weather, sports results, news, games, etc. The information is presented in pages or organised in topics specified in colour on the screen and you can access this information by simply pressing the buttons of the relevant colour on t
Summary of the content on the page No. 20
Other Teletext functions Newsflash When a newsflash is detected, MIX is replaced by N in the navigation bar. Press the blue button to display the newsflash. In the case of an update, the Teletext function is enabled and displays the new information. This function is disabled if TV changes the programme, enters standby mode or is switched off. Press the EXIT button to quit the Teletext function and return to TV mode. Subtitles Some channels provide subtitles for some of their programmes. The numb
