Summary of the content on the page No. 1
User Guide
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Contents Introduction ATV Menu Setup HDMI 5 ATV Setting 23 Safety is Important 5 Picture 24 In the box 5 Sound 25 Function 25 Safety Information Teletext Function Keep these instructions 6
Summary of the content on the page No. 4
Contents DVD Function Setup Picture 42 Sound 42 DVD Settting 42 Function 44 Troubleshooting Display Troubleshooting 45 Sound and TV Troubleshooting 45 DVD Troubleshooting 46 Specifications Specifications 47 Display Mode Display Mode
Summary of the content on the page No. 5
Introduction Thank you for purchasing this Technika In the box HD Ready LCD/DVD TV which has been designed and manufactured to give you many years of trouble-free service. You will fi nd the following: You may already be familiar with using a • HD Ready LCD/DVD TV similar product but please take time to read • User Guide these instructions which have been written to ensure you get the very best from your • Power Cable purchase. • Remote Control Throughout the remainder of this user guide
Summary of the content on the page No. 6
Safety Information IMPORTANT SAFETY INSTRUCTIONS - • To avoid interference, switch this TV off READ CAREFULLY BEFORE USE while operating other radio devices in the immediate vicinity. Take note of the following safety information which appears on the back of this TV. • Refer all servicing to qualifi ed service personnel. Servicing is required when the TV CAUTION! RISK OF ELECTRIC SHOCK has been damaged in any way, such as the DO NOT OPEN. power cord or plug being damaged, liquid TO REDUCE
Summary of the content on the page No. 7
Safety Information the user is encouraged to try to correct the interference by one of the following measures: • Re-orient or relocate the receiving antenna. • Increase the separation between the external device and the TV. • Connect the external device into an outlet on a circuit different from that to which the TV is connected. • Consult the dealer or an experienced radio/ TV technician for help. Electrical Information Mains Supply The mains operating voltage is detailed on the rating pla
Summary of the content on the page No. 8
Parts Identification FRONT PANEL 1. IR sensor window 2. Indicator (the indicator is red when in standby mode, and green when in working normally). 1 2 LOCAL KEYBOARD PANEL PLAY/ II EJECT TV/AV CH+ CH- VOL+ VOL- MENU POWER COVER SIDE IN FRONT PLAY/ II – start of play or pause of play EJECT – take the disk out TV/AV – select input source CH+ - increase channel number CH- - decrease channel number VOL+ - increase sound volume VOL- - decrease sound volume MENU – enter or
Summary of the content on the page No. 9
Parts Identification BACK PANEL 2 3 1 4 5 6 7 8 9 10 11 12 1. SCART connecting terminals 2. HDMI inputs 3. CI connector 4. PC audio input 5. PC VGA input 6. Y input 7. Pb input 8. Pr input 9. Audio Earphone output 10. TV signal input (75 Ohm) 11. S-Video input 12. AC Power supply 32" HD Ready LCD/DVD TV User Guide 9
Summary of the content on the page No. 10
Connecting the TV WARNING! ENSURE THE TV AND SCART lead ALL ANCILLARY EQUIPMENT IS You can connect this TV to a compatible UNPLUGGED FROM THE MAINS device using a SCART lead. The connection BEFORE MAKING ANY CONNECTIONS! uses component video signals, i.e. the red, green and blue (RGB) content of the video are sent on separate signals. Connecting the TV antenna VGA cable Connect the TV antenna to the aerial socket You can use your TV as a monitor for your with a 75 ohm co-axial plug. For
Summary of the content on the page No. 11
Connecting the TV CONNECTING DIAGRAM NOTE You should insert all necessary cables BEFORE plugging in power cord. 32" HD Ready LCD/DVD TV User Guide 11
Summary of the content on the page No. 12
Common Interface slot COMMON INTERFACE The Common Interface (CI) slot is designed to accept the Conditional Access Module (CAM) and Smart Card in order to view the pay TV programmes and additional services. Contact your Common Interface service provider to get more information about the modules and subscription. Note: Conditional Access Modules and Smart Cards are sold separately. WARNING: SWITCH OFF YOUR TV BEFORE ANY MODULE IS INSERTED IN THE COMMON INTERFACE SLOT. The CI slot is lo
Summary of the content on the page No. 13
Wall Mounting WALL MOUNTING Suitable for wall mounting - VESA 400 x 200 mm 1. The base must first be removed. Place the TV face down. 2. Remove the three screws holding the base in position. 3. Remove and store the base and screws. 4. Use four machine screws (M4 x 10 mm) to mount the TV on the bracket. Mounting the wall bracket - please refer to the user instructions supplied with the wall bracket (not supplied). 32" HD Ready LCD/DVD TV User Guide
Summary of the content on the page No. 14
14 32" HD Ready LCD/DVD TV User Guide
Summary of the content on the page No. 15
32" HD Ready LCD/DVD TV User Guide 15
Summary of the content on the page No. 16
Remote Control BATTERY INSTALLATION Remove the battery cover. Insert two SUM-4(AAA) batteries matching the -/+ polarities of the battery to the -/+ marks inside the battery compartment, as follows: BATTERY LIFE Normally, battery can be used for one year. If the remote control is still not working, when very near to the TV's remote sensor window, please use new batterys. Please use SUM-4(AAA) battery. NOTES Never use rechargeable battery. Never charge, short-circuit, disassemble and heat the bat
Summary of the content on the page No. 17
Let's Start SWITCHING ON After the uni t has been suitably placed / fixed , on the table or on th e wall, and all necessary cables including the power have been connected, the next yo u should do is: Press the [STANDBY] button on the remote control to make the unit switch to power-on mode - you will see the LED indicator turn green. Now you can enjoy the many features of your new TV. STANDBY STANDBY INDICATOR SELECTING SOURCE OPERATION You can select input source by using source menu. Press [
Summary of the content on the page No. 18
DTV Menu Setup In DTV mode, press [SETUP] button into the main menu and the main menu will show as follows: Press [ ] button o n the remote control, you can select main menu sections (main menu sections consist of) " DTV SETTING " , " PICTURE ", " SOUND " , " FUNCTION ") . Press [ ] or [OK] button to enter this menu section. Press [ ] button on the remote control to select the item, and then press [ ] button to adjust parameter value. Press [SETUP] button to return to m
Summary of the content on the page No. 19
DTV Menu Setup Audio Language item enables you t o adjust audio language. Audio Language English MPEG L R MPEG English VI EXIT SETUP OK Subtitle language item enables you to adjust subtitle language. Subtitle Language Off English EXIT OK SETUP Time item enables you to enter submenu. DTV SETTING Clock to adjust the real time. __ __ __ __ Clock Time Zone to adjust the time zone from Canary Canary GMT Time Zone GMT to Berlin GMT+1. Daylight Off Daylight to adjust summer time off or on. SETUP Sel
Summary of the content on the page No. 20
DTV Menu Setup Change password item enables you t o change the DTV SETTING locked password. Lock System Off Change Password Block Programme Parental Guidance Please enter password Off ___ CI Information New _ ___ Confirm Hearing Impaired Off SETUP Select Adjust Return Block Programme item enables you t o set the lock Block programme channel. DTV 5 five DTV 16 QVC DTV 17 UK Gold DTV 23 bid-up.tv DTV 25 TCM DTV 26 UK Style DTV 27 Discovery DTV 28 DiscoveryH&L DTV 32 Cartoon Nwk DTV 33 Boomeran
