Summary of the content on the page No. 1
PLV16151S1 IB Cover Size: 148 X 210 MM
15” LCD TV
PLV1615S
Owner’ Owner’s Man s Manual ual
811-161S91WXXX
Summary of the content on the page No. 2
SAFETY PRECAUTIONS The lightning flash with an arrowhead CAUTION within a triangle alerts you to uninsulated dangerous voltage within the product's RISK OF ELECTRIC SHOCK DO NOT OPEN enclosure that could cause an electric shock. RISQUE DE CHOC ÉLECTRIQUE NE AVIS PAS OUVRIR The exclamation point within a triangle alerts you to the presence of important * SEE REAR OF UNIT FOR GRAPHIC SYMBOLS * operating, maintenance and servicing WARNING: TO REDUCE THE RISK OF ELECTRIC instructions in this user’
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 13.Unplug this apparatus during lightning 2. Keep these instructions. storms or when unused for long periods 3. Heed all warnings. of time. 4. Follow all instructions. 14.Refer all servicing to qualified service 5. Do not use this apparatus near water. personnel. Servicing is required when 6. Clean only with a dry cloth. the apparatus has been damaged in any 7. Do not block any ventilation openings. way, such as power-supply cord or plug
Summary of the content on the page No. 4
TABLE OF CONTENTS SAFETY PRECAUTIONS ............................................................................................ 2 IMPORTANT SAFETY INSTRUCTIONS .................................................................... 3 REMOTE CONTROL ................................................................................................. 4 ACCESSORIES ........................................................................................................... 4 REMOTE CONTROL REFERENCE GUIDE
Summary of the content on the page No. 5
REMOTE CONTROL USING THE REMOTE CONTROL Point the remote control at the REMOTE SENSOR located on the unit. When using this unit in very bright light, the infrared REMOTE CONTROL SENSOR may not work properly. The recommended effective distance for using the remote control is about 16 feet (5 meters). TO CHANGE THE REMOTE CONTROL BATTERY 1. Open the battery door. 2. Insert two “AAA” batteries. BATTERY REPLACEMENT When the batteries become weak, the operating dis
Summary of the content on the page No. 6
REMOTE CONTROL REFERENCE GUIDE 6) DISPLAY button Press to show which input you are watching (TV Channel/AV/YUV/PC). 7) SLEEP button Sets the SLEEP timer. The unit will remain ON for the time that is set, and will automatically shut off afterwards. 8) CC button Press to activate the Closed Captioning feature. This function only works on programs broadcasted with captions. 9) FORMAT button Press to select the picture format. 10) STANDBY/ON button Turns the unit ON and puts the unit into STANDBY
Summary of the content on the page No. 7
UNIT REFERENCE GUIDE FRONT & BOTTOM VIEW 1) Color LCD Screen 8) REMOTE CONTROL SENSOR 2) STANDBY indicator Do not block this sensor or remote Indicates whether the unit is ON or control will not work. in STANDBY (OFF) mode. 9) Power Cord Light On: The unit is in STANDBY. 10) Headphones Jack Light Off: The unit is turned ON. 11) AV IN Video Input Jack 3) STANDBY/ON button 12) AV IN Audio Input Jacks (Left / Right) Turns the unit on and off. 13) AV OUT Audio Output Jacks (Left/ 4) MENU button Righ
Summary of the content on the page No. 8
CONNECTIONS CONNECTING A TV ANTENNA/CABLE/SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system Note: For receiving over-the-air TV broadcasts, we recommend that you use an external fixed antenna. Should you require the use of a temporary antenna, please ensure that you purchase an antenna with sufficient ability to receive in weak signal areas. Only when you are in
Summary of the content on the page No. 9
CONNECTIONS CONNECTING TO A/V DEVICES (VCR, PVR, CAMCORDER, GAME SYSTEM, ETC.) Connecting to Devices with an S-Video Output To connect to A/V devices such as a VCR or camcorder: - Connect to a VCR Connect the right (red) and left (white) audio output from the VCR to the right (red) and left (white) input on this unit (Audio cable not included). Connect the S-VIDEO output from the VCR to the S- VIDEO input on this unit (S-VIDEO cable not included). Make sure you connect both audio and video from
Summary of the content on the page No. 10
CONNECTIONS CONNECTING TO DEVICES WITH A COMPOSITE (YELLOW RCA- TYPE) VIDEO OUTPUT To connect to A/V devices such as a VCR or camcorder: - Connect to a VCR Connect the right (red) and left (white) audio output from the VCR to the right (red) and left (white) input on this unit and connect the video (yellow) output from the VCR to the video input on this unit (Video/ Audio cable not included). Make sure you connect both audio and video from the same VCR to the same input (AV IN). Note: Please ref
Summary of the content on the page No. 11
CONNECTIONS CONNECTING TO DEVICES WITH A COMPOSITE (YELLOW RCA- TYPE) VIDEO INPUT To connect to A/V devices such as a VCR, PVR or camcorder: - Connect to a VCR/PVR Connect the right (red) and left (white) audio input from the VCR/PVR to the right (red) and left (white) output on this unit and connect the video (yellow) input from the VCR/PVR to the video output on this unit (Video/Audio cable not included). Make sure you connect both audio and video from the same VCR/PVR to the same output (AV O
Summary of the content on the page No. 12
CONNECTIONS CONNECTING TO SOURCES WITH COMPONENT VIDEO OUTPUT (DVD - ONLY 480I, 480P, 720P & 1080I ARE SUPPORTED) Devices with component video output must be connected to the YUV input: Connect the three video outputs (Y, Pb, Pr) from the source to the corresponding video inputs on this unit (Component video cable not included). Connect the right (red) and left (white) audio output from the source to the right (red) and left (white) input on this unit (Audio cable not included). Make sure you co
Summary of the content on the page No. 13
CONNECTIONS CONNECTING A PC Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on this unit using a monitor cable (not included). Connect a stereo audio cable (not included) to the PC AUDIO IN jack on the bottom of this unit, and the other end to the AUDIO OUT jack on your computer’s sound card. CONNECT THE POWER CORD Connect the AC power cord into a wall outlet. Press the STANDBY/ON button on the unit or remote control to turn on the unit. Note:
Summary of the content on the page No. 14
75mm INSTALLATION MOUNTING ON THE WALL This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 75mm x 75mm mounting kit designed for flat-panel TVs (sold separately). Mount this unit according to the directions included with the mounting kit. 75mm USING HEADPHONES Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired level. When headphones are connected, no sound will come from the front speakers. Note: Avoid lis
Summary of the content on the page No. 15
TV SETUP MAIN MENU 1. Press the MENU button. 2. Use or button to select the options (Picture / Sound / Setup / TV Setting / Restore Setting). 3. The screen will change to your selected mode immediately. 4. To exit the MAIN MENU and return to the normal screen, press the EXIT button on remote control. Note: When you are in AV, PC & YUV mode, the TV Setting option will not be shown. PICTURE MENU 1. Press the MENU button. 2. Use or button to select the Picture menu, then press the button to c
Summary of the content on the page No. 16
TV SETUP In PC mode Use or button to select the options (Brightness, Contrast, Frequency, Phase, H offset, V offset, Auto config, Color Temp, Mode) and adjust them using the or buttons. (The screen will change to your desired setting). - Resolution : 1024 x 768 max PC MODE - Refresh Frequency : 60Hz max H offset : Center the image by moving it left or right. V offset : Center teh image by moving it up or down. Color Temp : Adjust the three colour temperature of the picture. Select Nor
Summary of the content on the page No. 17
TV SETUP SETUP MENU 1. Press the MENU button. 2. Use or button to select the Setup menu, then press button to confirm the setting. 3. Use or button to select the options (OSD Size, Language, Parental, Timers) to or buttons to adjust the individual settings. be adjusted, then use the 4. Repeat step 3 to adjust other settings. 5. To exit the MAIN MENU and return to the normal screen, press the EXIT button on remote control. Notes: TV / AV MODE OSD Size : Select the screen size you prefer
Summary of the content on the page No. 18
TV SETUP PARENTAL SETTING Lock code 1. Press the MENU button. 2. Use or button to select the Setup menu, then press button to confirm the setting. 3. Use or button to select the Parental menu, then press or button to confirm the setting and the menu locked screen will be displayed. 4. Enter a 4-digit lock code. Once entered, the screen will enter the Parental menu. The preset lock code is “ 0000 “. 5. To exit the MAIN MENU and return to the normal screen, press the EXIT button on remote c
Summary of the content on the page No. 19
TV SETUP Child lock 1. Press the MENU button. 2. Use or button to select the Setup menu, then press button to confirm the setting. 3. Use or button to select the Parental menu, then press or button. 4. Enter a 4-digit to select the Lock code and turn on/off the Child lock using or button. TV / AV MODE 5. Use or button to select various Parental settings and use the or or button to adjust each setting. 6. Repeat steps 4-5 to adjust other options. 7. To exit the MAIN MENU and return to
Summary of the content on the page No. 20
TV SETUP TV SETTING 1. Press the TV MENU button. 2. Use the or button to select the TV setting menu, then press the button to confirm the setting. 3. Use the or button to select the Channel no. setting and use the or button to change the channel no. 4. Use the or button to select the Tuning mode and use the or button to change from AIR (over-the-air broadcasts) to CABLE (cable/satellite broadcasts). 5. Use the or button to select the Auto tune and press the or button to confirm t
